179
edits
Changes
no edit summary
By clicking [[File:Add Button.png|40x70px]] create 3 rules under '''Routing Rules for IPv4''' tab apply these changes to the rules:
By clicking [[File:Add Button.png|40x70px]] create 3 rules under '''Routing Rules for IPv4''' tab apply these changes to the rules:
======Policy Rule 1======
======Policy Rule 1======
----
# Enter Priority: '''1'''
# Enter Priority: '''1'''
# Select Incoming interface: '''LAN_VLAN_ETH0'''
# Select Incoming interface: '''LAN_VLAN_ETH0'''
[[File:POLICY_RULE_2.png|border|class=tlt-border|center]]
[[File:POLICY_RULE_2.png|border|class=tlt-border|center]]
======Policy Rule 3======
======Policy Rule 3======
----
# Enter Priority: '''1'''
# Enter Priority: '''1'''
# Select Incoming interface: '''LAN_VLAN_5'''
# Select Incoming interface: '''LAN_VLAN_5'''
'''NOTE: Delete all Autimatic or unrelated routing rules'''
'''NOTE: Delete all Autimatic or unrelated routing rules'''
===Configuration testing===
----
Connect end device to physical port that is assingned to different routing policy. Open cmd and run this command: '''traceroute 8.8.8.8''', three physical ports that we assigned to diffrent Vlans route to 8.8.8.8 should be dispayed using different addresses.
====LAN1 Test Result====
----
====LAN2 Test Result====
----
====LAN3 Test Result====
----
