Changes

'''Before proceeding with the confuration, ensure that all requirements are met:'''

'''Before proceeding with the confuration, ensure that all requirements are met:'''

# Before starting you need to have 3 different WAN connections. In this case we are going to use: '''Wi-fi WAN''', '''Wired WAN''' and '''Mobile WAN'''.These interfaces have to be preconfigured.

# Before starting you need to have 3 different WAN connections. In this case we are going to use: '''[https://wiki.teltonika-networks.com/view/WiFi_WAN_example Wi-fi WAN]''', '''Wired WAN''' and '''Mobile WAN'''.These interfaces have to be preconfigured.

[[File:PBR_MAIN_IMG.png|border|class=tlt-border|center]]

[[File:PBR11.png|border|class=tlt-border|center]]

==Configuration==

==Configuration==

----

----

click [[File:Add Button.png|40x70px]] and aplly this to the route:

click [[File:Add Button.png|40x70px]] and aplly this to the route:

#Select Interface: '''WifiWan''' | Enter Target: ''''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0''' | Enter IPv4-Gateway: '''192.168.100.1'''

#Select Interface: '''WifiWan''' | Enter Target: '''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0''' | Enter IPv4-Gateway: '''192.168.1.1 (Note: Use the Wi-Fi network's gateway. The current LAN gateway in use is 192.168.100.1. However, the correct gateway to route correctly will be the next hop address. This means the router gateway providing the Wi-Fi WAN should be used. In my case, this gateway is 192.168.1.1.)'''  

[[File:PBR_P_ROUTE_1.png|border|class=tlt-border|center|1000x300px]]

[[File:PBR_P_ROUTE_111.png|border|class=tlt-border|center|1000x300px]]

====Creating Wired Wan Routing Table====

====Creating Wired Wan Routing Table====

----

----

Connect end device to physical port that is assingned to different routing policy. Open cmd and run this command: '''traceroute 8.8.8.8''', three physical ports that we assigned to diffrent Vlans route to 8.8.8.8 should be dispayed using different gateways.

Connect end device to physical port that is assingned to different routing policy. Open cmd and run this command: '''tracert 8.8.8.8''', three physical ports that we assigned to diffrent Vlans route to 8.8.8.8 should be dispayed using different gateways.

====LAN1 Test Result====

====Physical Port 1 Test Result====

----

----

====LAN2 Test Result====

====Physical Port 2 Test Result====

----

----

====LAN3 Test Result====

 

====Physical Port 3 Test Result====

 

====Testing the Policy Route====

----

----