Changes

The reset button has two functions:

The reset button has two functions:

<ul>

<ul>

     <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUT300|RUTX08|RUTX10=|#default=Start of the reboot will be indicated by the flashing {{#switch:{{{series}}}|TAP100=power led.|#default=of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB1|TRB2|TRB2M|TRB16=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}}}

     <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUT300|RUTX08|RUTX10=|#default=Start of the reboot will be indicated by the flashing {{#switch:{{{series}}}|TAP100=power led.|#default=of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB1|TRB2|TRB2M|TRB16|TRB14x=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}}}

     <li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot. {{#ifeq:{{{sms}}}|1|{{#switch:{{{series}}}|TAP100=|#default=Signal strength LEDs indicate the elapsed time while holding the reset button. Start of the factory reset will be indicated by flashing of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB2M|TRB16|TRB1|TRB2=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs.}}|}} <br><b>NOTE</b>: the default button hold time value (min time 12 seconds, max time 20 seconds) can be changed in the {{#switch: {{{series}}}

     <li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot. {{#ifeq:{{{sms}}}|1|{{#switch:{{{series}}}|TAP100=|#default=Signal strength LEDs indicate the elapsed time while holding the reset button. Start of the factory reset will be indicated by flashing of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB2M|TRB16|TRB1|TRB2=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs.}}|}} <br><b>NOTE</b>: the default button hold time value (min time 12 seconds, max time 20 seconds) can be changed in the {{#switch: {{{series}}}

| TRB14x|TRB2xx|TRB5|TRB16|TRB2M|TRB1|TRB2 = gateway

| TRB14x|TRB2xx|TRB5|TRB16|TRB2M|TRB1|TRB2 = gateway

{{#switch:{{{series}}}

{{#switch:{{{series}}}

  | RUT8xx|TRB14x|TRB5=

  | RUT8xx|TRB14x|TRB5|TRB16=

  | #default={{Template: Networking_device_manual_device_recovery_bootloader|name={{{name}}}|series={{{series}}}}}

  | #default={{Template: Networking_device_manual_device_recovery_bootloader|name={{{name}}}|series={{{series}}}}}

}}

}}