Changes

Before we begin, let's take a look at the configuration that we are attempting to achieve and the prerequisites that make it possible. On a RUT1, an I/O Juggler action is created to execute a command when Input 1 is being triggered to a state of "high" by a sensor to change the output state to "high" on a RUT2 and trigger the sensor.

Before we begin, let's take a look at the configuration that we are attempting to achieve and the prerequisites that make it possible. On a RUT1, an I/O Juggler action is created to execute a command when Input 1 is being triggered to a state of "high" by a sensor to change the output state to "high" on a RUT2 and trigger the sensor.

[[File:IO topology.jpg|border|center|class=tlt-border|954x954px]]

[[File:IO topology new.jpg|border|center|class=tlt-border|954x954px]]

'''Prerequisites''':

'''Prerequisites''':

----

----

[[RUT955_Mobile_Utilities#Post.2FGet|Post/Get]] allows you to perform action requests by writing them in the URL after your device’s IP address. Go to the:

[[RUT955_Mobile_Utilities#Post.2FGet|Post/Get]] allows you to perform action requests by writing them in the URL after your device’s IP address. Go to the:

* '''Services → Mobile Utilities → SMS Gateway page → Post/Get (1)''';

* '''Services → Mobile Utilities → SMS Gateway page → Post/Get''';

* '''Enable''' Post/Get '''(2)''';

* '''Enable''' Post/Get '''(1)''';

* '''Set a username (3)''' and '''password (4)''';

* '''Set a username (2)''' and '''password (3)''';

* '''Save''' and '''apply changes (5)''';

* '''Save''' and '''apply changes (4)''';

===RUT 1===

===RUT 1===