Line 56: |
Line 56: |
| Change SSID here to an SSID that the router will be connecting to | | Change SSID here to an SSID that the router will be connecting to |
| | | |
− | <pre>uci set wireless.@wifi-iface[-1].ssid=''''RUT1_SSID''''</pre> | + | <pre>uci set wireless.@wifi-iface[-1].ssid='RUT1_SSID'</pre> |
| | | |
| Change BSSID here to BSSID that the router will be connecting to (L2 address) | | Change BSSID here to BSSID that the router will be connecting to (L2 address) |
| | | |
− | <pre>uci set wireless.@wifi-iface[-1].bssid=''''RUT1_BSSID''''</pre> | + | <pre>uci set wireless.@wifi-iface[-1].bssid='RUT1_BSSID'</pre> |
| | | |
− | Use appropriate auth method, PSK2 = WPA2-PSK here | + | Use appropriate encryption method, PSK2 = WPA2-PSK here |
| | | |
| <pre>uci set wireless.@wifi-iface[-1].encryption='psk2'</pre> | | <pre>uci set wireless.@wifi-iface[-1].encryption='psk2'</pre> |
Line 68: |
Line 68: |
| Change secret to appropriate one | | Change secret to appropriate one |
| | | |
− | <pre>uci set wireless.@wifi-iface[-1].key=''''SSID_PASSWORD'''' | + | <pre>uci set wireless.@wifi-iface[-1].key='SSID_PASSWORD' |
| uci set wireless.@wifi-iface[-1].disabled='0' | | uci set wireless.@wifi-iface[-1].disabled='0' |
| uci set wireless.@wifi-iface[-1].skip_inactivity_poll='0' | | uci set wireless.@wifi-iface[-1].skip_inactivity_poll='0' |
Line 74: |
Line 74: |
| | | |
| ===New internface configuration=== | | ===New internface configuration=== |
| + | Create a new interface IPv4 for WiFi WAN. |
| ---- | | ---- |
| <pre>uci set network.wifi_wan=interface | | <pre>uci set network.wifi_wan=interface |
Line 82: |
Line 83: |
| uci set network.wifi_wan.broadcast='0'</pre> | | uci set network.wifi_wan.broadcast='0'</pre> |
| | | |
− | Set mwan3 settings for new interface wifi_wan | + | Set mwan3 settings for new interface |
| | | |
| <pre>uci set mwan3.wifi_wan=interface | | <pre>uci set mwan3.wifi_wan=interface |
Line 108: |
Line 109: |
| | | |
| ===IPv6 interface creation=== | | ===IPv6 interface creation=== |
| + | Create a new IPv6 interface for WiFi WAN |
| ---- | | ---- |
| <pre>uci set network.wifi_wan6=interface | | <pre>uci set network.wifi_wan6=interface |
Line 148: |
Line 150: |
| | | |
| ===LAN interface configuration=== | | ===LAN interface configuration=== |
| + | Configure a LAN interface accordingly. |
| ---- | | ---- |
| <pre>uci set network.lan_repeater=interface | | <pre>uci set network.lan_repeater=interface |
Line 154: |
Line 157: |
| uci set network.lan_repeater.enabled='1' | | uci set network.lan_repeater.enabled='1' |
| uci set network.lan_repeater.network='lan wifi_wan'</pre> | | uci set network.lan_repeater.network='lan wifi_wan'</pre> |
− |
| |
− | <pre>uci set network.lan.ipaddr='192.168.1.3'</pre>
| |
| | | |
| Set DHCP settings for LAN interface (disable dhcp on LAN) and enable IPv6 relay on wifi_wan interface and | | Set DHCP settings for LAN interface (disable dhcp on LAN) and enable IPv6 relay on wifi_wan interface and |
Line 171: |
Line 172: |
| | | |
| ===Firewall configuration=== | | ===Firewall configuration=== |
| + | Set firewall zone, using WAN firewall zone for newly created WiFi WAN network interface. |
| ---- | | ---- |
− | Set firewall zone, using WAN firewall zone for newly created wifi_wan network interface
| |
− |
| |
| <pre>uci set firewall.@zone[1].network='wan wan6 mob1s1a1 mob1s2a1 wifi_wan'</pre> | | <pre>uci set firewall.@zone[1].network='wan wan6 mob1s1a1 mob1s2a1 wifi_wan'</pre> |
| | | |
| ===Commit changes=== | | ===Commit changes=== |
| + | Save all the changes and restart the configuration |
| ---- | | ---- |
− | Save all the changes and restart the configuration
| |
− |
| |
| <pre>uci commit | | <pre>uci commit |
| reload_config</pre> | | reload_config</pre> |