1,108
edits
Changes
Stunnel configuration example using Telnet (view source)
Revision as of 10:59, 22 December 2022
, 10:59, 22 December 2022no edit summary
<p style="color:red">The information in this page is updated in accordance with firmware version [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''07.02.7'''].</p>
==Introduction==
==Introduction==
This article provides a guide on how to configure stunnel and use telnet protocol for devices to interact with each other securely. These configurations can be implemented on RUT9xx and RUTX series.
This article provides a guide on how to configure stunnel and use telnet protocol for devices to interact with each other securely. These configurations can be implemented on RUT, RUTX and TRB series devices.
* First you want to make sure that you have '''ADVANCED mode''' enabled. This will allow you to choose from a larger variety of settings.
* First you want to make sure that you have '''ADVANCED mode''' enabled. This will allow you to choose from a larger variety of settings.