41
edits
Changes
RUTOS SDK Usage Examples (view source)
Revision as of 15:23, 24 January 2023
, 15:23, 24 January 2023no edit summary
* Custom APN
* Custom APN
* PAP authentication method
* PAP authentication method
Open the '''config_generate''' script and navigate to the line 178. There, you should be able to see the '''"add_modem_section()"''' function, where we will be making our changes. To set a custom APN, you will need to add the following lines to the existing "uci_set" commands:
<pre>
uci_set network "${interface}" force "-1"
uci_set network "${interface}" apn "YOUR_APN"
</pre>
To add PAP authentication method, change the existing "'''uci_set network "${interface}" auth "none"'''" line to "'''uci_set network "${interface}" auth "pap"'''", then add the following lines to define your APN username and password:
<pre>
uci_set network "${interface}" username "YOUR_USERNAME"
uci_set network "${interface}" password "YOUR_PASSWORD"
</pre>
After applying the aforementioned changes, the '''"add_modem_section()"''' function in the script should look similar to this:
[[File:Apn dif fin.png|1748x963px]]
===Changing the default LAN IP address===
----
Open the '''config_generate''' script and navigate to the line 70; there, you should be able to see the '''"generate_network()"''' function, where we will be applying the following changes. For demonstration purposes, our custom LAN IP address will be set to '''"10.10.10.1"''':
* In the line 119 you should be able to see the '''"ipad=${ipaddr:-"%%LAN_IP%%"}"''' line. Change the '''"%%LAN_IP%%"''' portion with your desired LAN IP address; for example: '''"ipad=${ipaddr:-"10.10.10.1"}"'''
After applying this change, the '''"generate_network()"''' function should look similar to this:
[[File:Lan ip-fin1.png|1793x762px]]
===Setting WAN port as LAN===
----
To enable the '''“WAN as LAN”''' feature, you will need to disable the WAN/WAN6 interfaces and bridge the '''“eth1”''' interface to the LAN interface in the same '''"generate_network()"''' function.
To bridge the '''"eth1"'''' interface to the LAN interface, add the following command after the line 120:
<pre>
uci set network."$1".ifname='eth0 eth1'
</pre>
To disable WAN/WAN6 interfaces, add the following commands after line 147 and line 158:
'''After Line 147:'''
<pre>
set network.$1.disabled='1'
</pre>
'''After Line 158:'''
<pre>
set network.${1}6.disabled='1'
</pre>
After applying these changes, the '''"generate_network()"''' function should look similar to this:
[[File:Lan-wan-fin1.png|1833x978px]]
