Changes

==Bluetooth Data to Server via MQTT protocol==

==Bluetooth Data to Server via MQTT protocol==

In this section, we are going to upload Bluetooth data to server on Node-RED. The configuration is going to be similar to Modbus data to server.  

In this section, we are going to upload Bluetooth data to server on Node-RED. The configuration is going to be similar to Modbus data to server. More information about bluetooth functionality ant usage with beacons could be found in [[Teltonika EYE device pairing and data sender configuration example]].

===Device configuration===

===Device configuration===

After that, navigate to '''Services -> Data to server.''' Add new data sender and configure settings accordingly:

After that, navigate to '''Services -> Data to server.''' Add new data sender and configure settings accordingly:

*'''Enable''': on

# '''Enable''': on

*'''Name''': BT_data (input any preferred name)

# '''Name''': BT_data (input any preferred name)

*'''Data source''': Bluetooth data

# '''Data source''': Bluetooth data

*'''Protocol''': MQTT

# '''Protocol''': MQTT

*'''JSON format''': {"Data": "%b", "Hour": "%d"} - adjust this according to your needs

# '''JSON format''': {"Data": "%b", "Hour": "%d"} - adjust this according to your needs

# '''URL/Host/Connection string''': 192.168.10.139 (virtual machine address)

*'''URL/Host/Connection string''': 192.168.10.139 (virtual machine address)

# '''Port''': 1883

*'''Port''': 1883

# '''Topic''': beacon (input any preferred topic, make sure to subscribe on the same topic)

*'''Topic''': beacon (input any preferred topic, make sure to subscribe on the same topic)

[[File:Bluetooth data sender settings rutx11.png|border|600px|class=tlt-border]]

[[File:Bluetooth data sender settings rutx11.png|border|600px|class=tlt-border]]