505
edits
Changes
Modbus and Bluetooth data sending to Node-RED (view source)
Revision as of 16:41, 20 February 2023
, 16:41, 20 February 2023→Device configuration
There are a couple of different use cases with Node-RED and Teltonika devices:
There are a couple of different use cases with Node-RED and Teltonika devices:
# [[Draft:Nodered#MQTT_Gateway | MQTT gateway using either Node-RED or Teltonika device as MQTT broker.]]
# [[Modbus_and_Bluetooth_data_sending_to_Node-RED#MQTT_Gateway | MQTT gateway using either Node-RED or Teltonika device as MQTT broker.]]
# [[Draft:Nodered#Modbus_Data_to_Server_via_MQTT_protocol | Modbus data to server using either Node-RED or Teltonika device as MQTT broker.]]
# [[Modbus_and_Bluetooth_data_sending_to_Node-RED#Modbus_Data_to_Server_via_MQTT_protocol | Modbus data to server using either Node-RED or Teltonika device as MQTT broker.]]
# [[Draft:Nodered#Bluetooth_Data_to_Server_via_MQTT_protocol | Bluetooth data to server using Node-RED as MQTT broker.]]
# [[Modbus_and_Bluetooth_data_sending_to_Node-RED#Bluetooth_Data_to_Server_via_MQTT_protocol | Bluetooth data to Node-RED server.]]
# [[Draft:Nodered#Modbus_Data_to_Server_via_HTTP_protocol | HTTP data to Node-RED server.]]
# [[Modbus_and_Bluetooth_data_sending_to_Node-RED#Modbus_Data_to_Server_via_HTTP_protocol | HTTP data to Node-RED server.]]
==Node-RED installation and setup==
==Node-RED installation and setup==
To test the configuration, '''deploy''' the nodes again and send the message by clicking on the '''inject''' node.
To test the configuration, '''deploy''' the nodes again and send the message by clicking on the '''inject''' node.
==MQTT gateway using MQTT explorer and Node-RED broker==
===MQTT gateway using MQTT explorer and Node-RED broker===
----
In this example, we are going to use the same Node-RED broker configured in previous parts of this article, only this time we are going to use [http://mqtt-explorer.com/ MQTT Explorer] app to Publish and Subscribe to Modbus data.
In this example, we are going to use the same Node-RED broker configured in previous parts of this article, only this time we are going to use [http://mqtt-explorer.com/ MQTT Explorer] app to Publish and Subscribe to Modbus data.
[[File:Nodered configurationexample topo6.png|border|800px|class=tlt-border]]
[[File:Nodered configurationexample topo6.png|border|800px|class=tlt-border]]
===Device setup===
====Device setup====
----
----
Navigate to '''Services -> Modbus -> MQTT Gateway'''. Follow these steps for the configuration:
Navigate to '''Services -> Modbus -> MQTT Gateway'''. Follow these steps for the configuration:
[[File:MQTT gateway settings node red local router.png|border|500px|class=tlt-border]]
[[File:MQTT gateway settings node red local router.png|border|500px|class=tlt-border]]
===MQTT explorer setup and testing===
====MQTT explorer setup and testing====
----
----
Open MQTT Explorer application and in the default screen input the '''Host IP (1)''' of MQTT Broker, then press '''Connect (2)'''.
Open MQTT Explorer application and in the default screen input the '''Host IP (1)''' of MQTT Broker, then press '''Connect (2)'''.
[[File:Mqtt explorer response from router.png|border|400px|class=tlt-border]]
[[File:Mqtt explorer response from router.png|border|400px|class=tlt-border]]
==Modbus Data to Server via MQTT protocol==
==Modbus Data to Server via MQTT protocol==
# '''Topic''': rutx (input any preferred topic, make sure to subscribe on the same topic)
# '''Topic''': rutx (input any preferred topic, make sure to subscribe on the same topic)
[[File:Data sender settings to node red with node red broker.png|border|1000px|class=tlt-border]]
[[File:Data sender settings to node red with node red broker.png|border|800px|class=tlt-border]]
===Node-RED setup===
===Node-RED setup===
# '''Topic''': beacon (input any preferred topic, make sure to subscribe on the same topic)
# '''Topic''': beacon (input any preferred topic, make sure to subscribe on the same topic)
[[File:Bluetooth data sender settings rutx11.png|border|600px|class=tlt-border]]
[[File:Bluetooth data sender settings rutx11.png|border|800px|class=tlt-border]]
===Node-RED setup===
===Node-RED setup===