Line 1: |
Line 1: |
| == Status Control Commands == | | == Status Control Commands == |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=39&zoom=100,68,232 AT+CPAS Mobile Equipment Activity Status]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=39&zoom=100,68,232 AT+CPAS Mobile Equipment Activity Status]=== |
− | | + | ---- |
| TheExecutionCommand queries the module‟s activity status. | | TheExecutionCommand queries the module‟s activity status. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=40&zoom=100,68,470 AT+CEER Extended Error Report]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=40&zoom=100,68,470 AT+CEER Extended Error Report]=== |
− | | + | ---- |
| The commandis used to query an extended error and report the cause of the last failed operation, such as: | | The commandis used to query an extended error and report the cause of the last failed operation, such as: |
| * the failure to release a call; | | * the failure to release a call; |
Line 17: |
Line 17: |
| The release cause '''<text>''' is a text to describe the cause information given by the network. | | The release cause '''<text>''' is a text to describe the cause information given by the network. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=41&zoom=100,68,346 AT+QCFG Extended Configuration Settings]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=41&zoom=100,68,346 AT+QCFG Extended Configuration Settings]=== |
− | | + | ---- |
| The command is used to query and configure various settings of UE. | | The command is used to query and configure various settings of UE. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=42&zoom=100,68,684 AT+QCFG="gprsattach" GPRS Attach Mode Configuration]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=42&zoom=100,68,684 AT+QCFG="gprsattach" GPRS Attach Mode Configuration]=== |
− | | + | ---- |
| The command specifies the mode to attach GPRS when UE is powered on. This configuration is valid only after the module is restarted. | | The command specifies the mode to attach GPRS when UE is powered on. This configuration is valid only after the module is restarted. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=43&zoom=100,68,370 AT+QCFG="nwscanmode" Network Search Mode Configuration]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=43&zoom=100,68,370 AT+QCFG="nwscanmode" Network Search Mode Configuration]=== |
− | | + | ---- |
| The commands pecifies the network mode to be serached. If '''<effect>''' is omitted, the configuration will take effect immediately. | | The commands pecifies the network mode to be serached. If '''<effect>''' is omitted, the configuration will take effect immediately. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=44&zoom=100,68,285 AT+QCFG="nwscanseq" Network Searching Sequence Configuration]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=44&zoom=100,68,285 AT+QCFG="nwscanseq" Network Searching Sequence Configuration]=== |
− | | + | ---- |
| The command specifies the sequence of searching network. This configuration is valid only after the module is restarted. | | The command specifies the sequence of searching network. This configuration is valid only after the module is restarted. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=45&zoom=100,68,97 AT+QCFG="roamservice" Roam Service Configuration]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=45&zoom=100,68,97 AT+QCFG="roamservice" Roam Service Configuration]=== |
− | | + | ---- |
| The command is used to enable or disable the roam service. If '''<effect>''' is omitted, the configuration will take effect immediately. | | The command is used to enable or disable the roam service. If '''<effect>''' is omitted, the configuration will take effect immediately. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=45&zoom=100,68,808 AT+QCFG="servicedomain" Service Domain Configuration]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=45&zoom=100,68,808 AT+QCFG="servicedomain" Service Domain Configuration]=== |
− | | + | ---- |
| The command specifies the registered service domain. If '''<effect>''' is omitted, the configuration will take effect immediately. | | The command specifies the registered service domain. If '''<effect>''' is omitted, the configuration will take effect immediately. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=46&zoom=100,68,598 AT+QCFG="band" Band Configuration]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=46&zoom=100,68,598 AT+QCFG="band" Band Configuration]=== |
− | | + | ---- |
| The command specifies the preferred frequency bands to be searched of UE. If '''<effect>''' is omitted, the configuration will take effect immediately. | | The command specifies the preferred frequency bands to be searched of UE. If '''<effect>''' is omitted, the configuration will take effect immediately. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=48&zoom=100,68,156 AT+QCFG="hsdpacat" HSDPA Category Configuration]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=48&zoom=100,68,156 AT+QCFG="hsdpacat" HSDPA Category Configuration]=== |
− | | + | ---- |
| The command specifies the HSDPA category. This configuration is valid only after the module is restarted. | | The command specifies the HSDPA category. This configuration is valid only after the module is restarted. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=48&zoom=100,68,834 AT+QCFG="hsupacat" HSUPA Category Configuration]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=48&zoom=100,68,834 AT+QCFG="hsupacat" HSUPA Category Configuration]=== |
− | | + | ---- |
| The command specifies the HSUPA category. This configuration is valid only after the module is restarted. | | The command specifies the HSUPA category. This configuration is valid only after the module is restarted. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=49&zoom=100,68,474 AT+QCFG="rrc" RRC Release Version Configuration]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=49&zoom=100,68,474 AT+QCFG="rrc" RRC Release Version Configuration]=== |
− | | + | ---- |
| The command specifies the RRC release version. This configuration is valid only after the module is restarted. | | The command specifies the RRC release version. This configuration is valid only after the module is restarted. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=50&zoom=100,68,202 AT+QCFG="sgsn" UE SGSN Release Version Configuration]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=50&zoom=100,68,202 AT+QCFG="sgsn" UE SGSN Release Version Configuration]=== |
− | | + | ---- |
| The command specifies the UE SGSN release version. This configuration is valid only after the module is restarted. | | The command specifies the UE SGSN release version. This configuration is valid only after the module is restarted. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=50&zoom=100,68,817 AT+QCFG="msc" UE MSC Release Version Configuration]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=50&zoom=100,68,817 AT+QCFG="msc" UE MSC Release Version Configuration]=== |
− | | + | ---- |
| The commandspecifies the UE MSCrelease version. This configuration is valid only after the module is restarted. | | The commandspecifies the UE MSCrelease version. This configuration is valid only after the module is restarted. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=51&zoom=100,68,496 AT+QCFG="PDP/duplicatechk"Establish Multi PDNs with the Same APN]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=51&zoom=100,68,496 AT+QCFG="PDP/duplicatechk"Establish Multi PDNs with the Same APN]=== |
− | | + | ---- |
| The command allows/refuses establishing multi PDNs with the same APN profile. The configuration will take effect immediately. | | The command allows/refuses establishing multi PDNs with the same APN profile. The configuration will take effect immediately. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=52&zoom=100,68,201 AT+QCFG="urc/ri/ring" RI Behavior When RING URC is Presented]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=52&zoom=100,68,201 AT+QCFG="urc/ri/ring" RI Behavior When RING URC is Presented]=== |
− | | + | ---- |
| '''AT+QCFG="urc/ri/ring"''', '''AT+QCFG="urc/ri/smsincoming"''' and '''AT+QCFG="urc/ri/other"control''' the RI (ring indicator) behavior when a URC is reported. These configurations will be stored into NV automatically. The ring indicator is active low. '''AT+QCFG="urc/ri/ring"''' specifies the RI behavior when URC '''RING''' is presented to indicate an incoming call. | | '''AT+QCFG="urc/ri/ring"''', '''AT+QCFG="urc/ri/smsincoming"''' and '''AT+QCFG="urc/ri/other"control''' the RI (ring indicator) behavior when a URC is reported. These configurations will be stored into NV automatically. The ring indicator is active low. '''AT+QCFG="urc/ri/ring"''' specifies the RI behavior when URC '''RING''' is presented to indicate an incoming call. |
| | | |
Line 76: |
Line 76: |
| indications when a call is coming. | | indications when a call is coming. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=54&zoom=100,68,97 AT+QCFG="urc/ri/smsincoming" RIBehavior WhenIncoming SMSURCs are Presented]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=54&zoom=100,68,97 AT+QCFG="urc/ri/smsincoming" RIBehavior WhenIncoming SMSURCs are Presented]=== |
− | | + | ---- |
| The command specifies the RI (ring indicator) behavior when related incoming message URCs are presented. Related incoming message URCs list: '''+CMTI''','''+CMT''','''+CDS''' and '''+CBM'''. | | The command specifies the RI (ring indicator) behavior when related incoming message URCs are presented. Related incoming message URCs list: '''+CMTI''','''+CMT''','''+CDS''' and '''+CBM'''. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=55&zoom=100,68,97 AT+QCFG="urc/ri/other" RI Behavior When Other URCsare Presented]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=55&zoom=100,68,97 AT+QCFG="urc/ri/other" RI Behavior When Other URCsare Presented]=== |
− | | + | ---- |
| The command specifies the RI (ring indicator)behavior when other URCs are presented. | | The command specifies the RI (ring indicator)behavior when other URCs are presented. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=55&zoom=100,68,810 AT+QCFG="risignaltype" RISignal Output Carrier]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=55&zoom=100,68,810 AT+QCFG="risignaltype" RISignal Output Carrier]=== |
− | | + | ---- |
| The command specifies the RI (ring indicator) signal output carrier. | | The command specifies the RI (ring indicator) signal output carrier. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=56&zoom=100,68,640 AT+QCFG="urc/delay"Delay URC Indication]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=56&zoom=100,68,640 AT+QCFG="urc/delay"Delay URC Indication]=== |
− | | + | ---- |
| The commandcan delay the output ofURC indication until ring indicatorpulse ends. | | The commandcan delay the output ofURC indication until ring indicatorpulse ends. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=57&zoom=100,68,366 AT+QCFG="urc/cache"URC Cache Function]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=57&zoom=100,68,366 AT+QCFG="urc/cache"URC Cache Function]=== |
− | | + | ---- |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=58&zoom=100,68,709 AT+QCFG="tone/incoming"Ring tone Function]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=58&zoom=100,68,709 AT+QCFG="tone/incoming"Ring tone Function]=== |
| + | ---- |
| + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=59&zoom=100,68,708 AT+QINDCFG URC Indication Configuration]=== |
| + | ---- |
| + | The command is used to control URC indication. |
| | | |
− | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=59&zoom=100,68,708 AT+QINDCFG URC Indication Configuration]==
| |
− |
| |
− | The command is used to control URC indication.
| |
| [[Category:TRM240 AT Commands]] | | [[Category:TRM240 AT Commands]] |