Status Control Commands TRM250: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
(Created page with "[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=38 '''4.1. AT+CPAS Mobile Equipment Activity Status - page 37'''] Th...")
 
No edit summary
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=38 '''4.1. AT+CPAS  Mobile Equipment Activity Status - page 37''']
== Status Control  Commands ==


TheExecutionCommand queries the module‟s activity status.
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=39&zoom=100,68,232 AT+CPAS Mobile Equipment Activity Status]===
 
----
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=39 '''4.2. AT+CEER    Extended Error Report - page 38''']
The Execution Command queries the module's activity status.
 
The commandis used to query an extended error and report the cause of the last failed operation, such as:
* the failure to release a call;
* the failure to set up a call (both mobile originated or terminated);
* the failure to modify a call by using supplementary services;
* the failure to activate, register, query, deactivate or deregister a supplementary service;
* the failureto attach GPRS or the failureto activatea PDP context;
* the failureto detach GPRS or the failureto deactivate a PDP context.
The release cause <text> is a text to describe the cause information given by the network.
 
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=40 '''4.3. AT+QCFG  Extended Configuration Settings - page 39''']


===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=40&zoom=100,68,492 AT+QCFG Extended Configuration Settings]===
----
The command is used to query and configure various settings of UE.
The command is used to query and configure various settings of UE.


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=41 '''4.3.1. AT+QCFG="gprsattach"   GPRS Attach Mode Configuration - page 40''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=41&zoom=100,68,609 AT+QCFG="nwscanseq" Configure RAT Searching Sequence]===
----
The command specifies the searching sequence of RATs. If '''<effect>''' is omitted, the configuration will take effect immediately.


The command specifies the mode  to attach GPRS when  UE  is  powered  on. This  configuration  is valid only after the module is restarted.
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=42&zoom=100,68,561 AT+QCFG="nwscanmode" Configure RAT(s) to be Searched]===
----
The command specifies the RAT(s) allowed to be searched. If '''<effect>''' is omitted, the configuration will take effect immediately


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=42 '''4.3.2. AT+QCFG="nwscanmode"   Network Search Mode Configuration - page 41''']
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=42&zoom=100,68,684 AT+QCFG="iotopmode" Configure Network Category to be Searched under LTE RAT]===
----
The command specifies the network category to be searched under LTE RAT. If '''<effect>''' is omitted, the configuration will take effect immediately.


The commands pecifies  the network  mode  to  be  serached. If <effect>is omitted, the configuration will take effect immediately.
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=44&zoom=100,68,473 AT+QCFG="roamservice" Roam Service Configuration]===
----
The command is used to enable or disable the roam service. If '''<effect>''' is omitted, the configuration will take effect immediately.


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=43 '''4.3.3. AT+QCFG="nwscanseq"   Network Searching Sequence Configuration - page 42''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=45&zoom=100,68,305 AT+QCFG="band" Band Configuration]===
----
The command specifies the preferred frequency bands to be searched of UE. If '''<effect>''' is omitted, the configuration will take effect immediately.


The  command specifies  the  sequence  of  searching  network. This  configuration  is  valid  only  after  the module is restarted.
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=47&zoom=100,68,229 AT+QCFG="celevel" Get LTE Cat NB1 Coverage Enhancement Level]===
----


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=44 '''4.3.4. AT+QCFG="roamservice"   Roam Service Configuration - page 43''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=47&zoom=100,68,793 AT+QCFG="servicedomain" Service Domain Configuration]===
----
The command specifies the registered service domain. If '''<effect>''' is omitted, the configuration will take effect immediately.


The command is used to enable or disable the roam service. If <effect>is omitted, the configuration will take effect immediately.
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=48&zoom=100,68,598 AT+QCFG="nb1/bandprior" Configure Band Scan Priority under LTE Cat NB1]===
----
The command specifies the band to be scanned with priority under LTE Cat NB1 RAT. This configuration is valid only after the module is restarted


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=44 '''4.3.5. AT+QCFG="servicedomain"   Service Domain Configuration - page 43''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=49&zoom=100,68,744 AT+QCFG="psm/urc" Enable/Disable PSM Entering Indication]===
----
The command is used to enable or disable the output of URC '''+QPSMTIMER: <tau_timer>,<T3324_timer>''' which is used to indicate the TAU duration and Active time duration for the module’s PSM.


The command specifies the registered service domain. If <effect>is omitted, the configuration will take effect immediately.
When PSM function is enabled and RRC connection release is received, the active timer (T3324) will be started, and the indication URC will be reported.
 
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=45 '''4.3.6. AT+QCFG="band"    Band Configuration - page 44''']
 
The command specifies the preferred frequency bands to be searched of UE. If <effect>is omitted, the configuration will take effect immediately.
 
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=47 '''4.3.7. AT+QCFG="hsdpacat"    HSDPA Category Configuration - page 46''']
 
The command specifies the HSDPA category. This configuration is valid only after the module is restarted.
 
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=47 '''4.3.8. AT+QCFG="hsupacat"    HSUPA Category Configuration - page 46''']
 
The command specifies the HSUPA category. This configuration is valid only after the module is restarted.
 
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=48 '''4.3.9. AT+QCFG="rrc"    RRC Release Version Configuration - page 47''']
 
The  command specifies  the  RRC  release  version.  This  configuration  is  valid  only  after  the  module  is restarted.
 
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=49 '''4.3.10. AT+QCFG="sgsn"    UE SGSN Release Version Configuration - page 48''']


===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=50&zoom=100,68,661 AT+QCFG="sgsn" UE SGSN Release Version Configuration]===
----
The command specifies the UE SGSN release version. This configuration is valid only after the module is restarted.
The command specifies the UE SGSN release version. This configuration is valid only after the module is restarted.


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=49 '''4.3.11. AT+QCFG="msc"   UE MSC Release Version Configuration - page 48''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=51&zoom=100,68,392 AT+QCFG="msc" UE MSC Release Version Configuration]===
 
----
The commandspecifies the UE MSCrelease version. This configuration is valid only after the module is restarted.
The command specifies the UE MSC release version. This configuration is valid only after the module is restarted.
 
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=50 '''4.3.12. AT+QCFG="PDP/duplicatechk"Establish Multi PDNs with the Same APN - page 49''']


===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=52&zoom=100,68,97 AT+QCFG="PDP/duplicatechk" Establish Multi PDNs with the Same APN]===
----
The command allows/refuses establishing multi PDNs with the same APN profile. The configuration will take effect immediately.
The command allows/refuses establishing multi PDNs with the same APN profile. The configuration will take effect immediately.


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=51 '''4.3.13. AT+QCFG="urc/ri/ring"   RI Behavior When RING URC is Presented - page 50''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=52&zoom=100,68,704 AT+QCFG="ledmode" Configure NETLIGHT Output Mode]===
----
This command is used to configure the output mode of NETLIGHT pin.


AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/smsincoming" and AT+QCFG="urc/ri/other"control  the RI  (ring  indicator)  behavior  when  a  URC  is  reported. These  configurations  will  be  stored  into  NV automatically.  The  ring  indicator  is  active  low. AT+QCFG="urc/ri/ring" specifies  the RI  behavior  when URC RING is presented to indicate an incoming call.
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=53&zoom=100,68,584 AT+QCFG="ims" IMS Function Control]===
----
The command is used to enable or disable IMS function. It also enables the NV about IMS to be set by the configuration of the MBN file when <value> is set to be 0.


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=53 '''4.3.14. AT+QCFG="urc/ri/smsincoming"   RIBehavior WhenIncoming SMSURCs are Presented - page 52''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=54&zoom=100,68,409 AT+QCFG="urc/ri/ring" RI Behavior When RING URC is Presented]===
----
'''AT+QCFG="urc/ri/ring"''', '''AT+QCFG="urc/ri/smsincoming"''' and '''AT+QCFG="urc/ri/other"control''' the RI  (ring  indicator)  behavior  when  a  URC  is  reported. These  configurations  will  be  stored  into  NV automatically. The  ring  indicator  is  active  low. '''AT+QCFG="urc/ri/ring"''' specifies  the  RI  behavior  when URC '''RING''' is presented to indicate an incoming call.


The command specifies the RI  (ring  indicator) behavior  when related  incoming  message  URCs  are presented. Related incoming message URCs list: +CMTI,+CMT,+CDSand+CBM.
The sum of parameter '''<activeduration>''' and '''<inactiveduration>''' determines the interval time of “RING” indications when a call is coming.


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=54 '''4.3.15. AT+QCFG="urc/ri/other"   RI Behavior When Other URCsare Presented - page 53''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=56&zoom=100,68,97 AT+QCFG="urc/ri/smsincoming" RI Behavior When Incoming SMSURCs are Presented]===
----
The  command specifies the RI  (ring  indicator) behavior  when  related  incoming  message  URCs  are presented. Related incoming message URCs list: '''+CMTI''','''+CMT''','''+CDS''' and '''+CBM'''.


===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=57&zoom=100,68,97 AT+QCFG="urc/ri/other" RI Behavior When Other URCsare Presented]===
----
The command specifies the RI (ring indicator)behavior when other URCs are presented.
The command specifies the RI (ring indicator)behavior when other URCs are presented.


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=54 '''4.3.16. AT+QCFG="risignaltype"   RISignal Output Carrier - page 53''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=57&zoom=100,68,850 AT+QCFG="risignaltype" RI Signal Output Carrier]===
----
The command specifies the RI (ring indicator) signal output carrier.


The command specifies the RI (ring indicator) signal output carrier.
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=58&zoom=100,68,806 AT+QCFG="urc/delay" Delay URC Indication]===
----
The command can delay the output of URC indication until ring indicator pulse ends.


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=55 '''4.3.17. AT+QCFG="urc/delay"Delay URC Indication - page 54''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=59&zoom=100,68,557 AT+QCFG="cmux/urcport" Configure URC Output Port for CMUX]===
----
The command can select the URC output port for CMUX.


The commandcan delay the output ofURC indication until ring indicatorpulse ends.
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=60&zoom=100,68,264 AT+QCFG="apready" Configure AP_READY Pin]===
----
The command is used to configure the AP_READY pin behavior.


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=56 '''4.3.18. AT+QCFG="urc/cache"URC Cache Function - page 55''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=61&zoom=100,68,377 AT+QCFG="psm/enter" Trigger Module into PSM Immediately]===
----
The command is used to trigger the module enter into PSM mode immediately after the RRC released. When this function is enabled and RRC connection release is received, the module will skip active timer (T3324) and enter into PSM mode immediately.


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=57 '''4.3.19. AT+QCFG="tone/incoming"Ring tone Function - page 56''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=60&zoom=100,68,264 AT+QCFG="apready" AT+QCFG="rrcabort" Abort RRC Connection]===
----
The command is used to abort RRC connection.


[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=58 '''4.4. AT+QINDCFG  URC Indication Configuration - page 57''']
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=62&zoom=100,68,802 AT+QCFG="apready" AT+QCFG="nccconf" Configure Features of NB-IoT]===
----
The command is used to configure features of NB-IoT.


===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=63&zoom=100,68,641 AT+QINDCFG URC Indication Configuration]===
----
The command is used to control URC indication.
The command is used to control URC indication.
[[Category:TRM250 AT Commands]]

Latest revision as of 09:16, 13 March 2023

Main Page > TRM Modems > TRM250 > TRM250 Manual > TRM250 AT Commands > Status Control Commands TRM250

Status Control Commands

AT+CPAS Mobile Equipment Activity Status

The Execution Command queries the module's activity status.

AT+QCFG Extended Configuration Settings

The command is used to query and configure various settings of UE.

AT+QCFG="nwscanseq" Configure RAT Searching Sequence

The command specifies the searching sequence of RATs. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="nwscanmode" Configure RAT(s) to be Searched

The command specifies the RAT(s) allowed to be searched. If <effect> is omitted, the configuration will take effect immediately

AT+QCFG="iotopmode" Configure Network Category to be Searched under LTE RAT

The command specifies the network category to be searched under LTE RAT. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="roamservice" Roam Service Configuration

The command is used to enable or disable the roam service. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="band" Band Configuration

The command specifies the preferred frequency bands to be searched of UE. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="celevel" Get LTE Cat NB1 Coverage Enhancement Level

AT+QCFG="servicedomain" Service Domain Configuration

The command specifies the registered service domain. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="nb1/bandprior" Configure Band Scan Priority under LTE Cat NB1

The command specifies the band to be scanned with priority under LTE Cat NB1 RAT. This configuration is valid only after the module is restarted

AT+QCFG="psm/urc" Enable/Disable PSM Entering Indication

The command is used to enable or disable the output of URC +QPSMTIMER: <tau_timer>,<T3324_timer> which is used to indicate the TAU duration and Active time duration for the module’s PSM.

When PSM function is enabled and RRC connection release is received, the active timer (T3324) will be started, and the indication URC will be reported.

AT+QCFG="sgsn" UE SGSN Release Version Configuration

The command specifies the UE SGSN release version. This configuration is valid only after the module is restarted.

AT+QCFG="msc" UE MSC Release Version Configuration

The command specifies the UE MSC release version. This configuration is valid only after the module is restarted.

AT+QCFG="PDP/duplicatechk" Establish Multi PDNs with the Same APN

The command allows/refuses establishing multi PDNs with the same APN profile. The configuration will take effect immediately.

AT+QCFG="ledmode" Configure NETLIGHT Output Mode

This command is used to configure the output mode of NETLIGHT pin.

AT+QCFG="ims" IMS Function Control

The command is used to enable or disable IMS function. It also enables the NV about IMS to be set by the configuration of the MBN file when <value> is set to be 0.

AT+QCFG="urc/ri/ring" RI Behavior When RING URC is Presented

AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/smsincoming" and AT+QCFG="urc/ri/other"control the RI (ring indicator) behavior when a URC is reported. These configurations will be stored into NV automatically. The ring indicator is active low. AT+QCFG="urc/ri/ring" specifies the RI behavior when URC RING is presented to indicate an incoming call.

The sum of parameter <activeduration> and <inactiveduration> determines the interval time of “RING” indications when a call is coming.

AT+QCFG="urc/ri/smsincoming" RI Behavior When Incoming SMSURCs are Presented

The command specifies the RI (ring indicator) behavior when related incoming message URCs are presented. Related incoming message URCs list: +CMTI,+CMT,+CDS and +CBM.

AT+QCFG="urc/ri/other" RI Behavior When Other URCsare Presented

The command specifies the RI (ring indicator)behavior when other URCs are presented.

AT+QCFG="risignaltype" RI Signal Output Carrier

The command specifies the RI (ring indicator) signal output carrier.

AT+QCFG="urc/delay" Delay URC Indication

The command can delay the output of URC indication until ring indicator pulse ends.

AT+QCFG="cmux/urcport" Configure URC Output Port for CMUX

The command can select the URC output port for CMUX.

AT+QCFG="apready" Configure AP_READY Pin

The command is used to configure the AP_READY pin behavior.

AT+QCFG="psm/enter" Trigger Module into PSM Immediately

The command is used to trigger the module enter into PSM mode immediately after the RRC released. When this function is enabled and RRC connection release is received, the module will skip active timer (T3324) and enter into PSM mode immediately.

AT+QCFG="apready" AT+QCFG="rrcabort" Abort RRC Connection

The command is used to abort RRC connection.

AT+QCFG="apready" AT+QCFG="nccconf" Configure Features of NB-IoT

The command is used to configure features of NB-IoT.

AT+QINDCFG URC Indication Configuration

The command is used to control URC indication.

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Status_Control_Commands_TRM250&oldid=105083"