2,526
edits
Changes
Template:Networking device leds (view source)
Revision as of 12:11, 15 March 2023
, 12:11, 15 March 2023no edit summary
| TRB14x|TRB2xx|TRB5 = gateway
| TRB14x|TRB2xx|TRB5 = gateway
| TRM2xx = modem
| TRM2xx = modem
| TSW1xx|TSW2xx = switch
| TSW1xx|TSW2xx|TSW3|TSW0 = switch
| router}} <b>LEDs</b> and their actions.
| router}} <b>LEDs</b> and their actions.
| TRB14x|TRB2xx|TRB5 = Gateway
| TRB14x|TRB2xx|TRB5 = Gateway
| TRM2xx = Modem
| TRM2xx = Modem
| TSW1xx|TSW2xx = Switch
| TSW1xx|TSW2xx|TSW3|TSW0 = Switch
| Router}} is powered up</td>
| Router}} is powered up</td>
</tr>
</tr>
| TRB14x|TRB2xx|TRB5 = Gateway
| TRB14x|TRB2xx|TRB5 = Gateway
| TRM2xx = Modem
| TRM2xx = Modem
| TSW1xx|TSW2xx = Switch
| TSW1xx|TSW2xx|TSW3|TSW0 = Switch
| Router}} is not power up</td>
| Router}} is not power up</td>
</tr>
</tr>
The signal strength LEDs can also be used as a <b>time indicator for holding the reset button</b>. When you press and hold the reset button, you have to hold it pressed for 5 seconds (by default) to initiate a factory reset. Depending on a number of signal strength LEDs, time needed to reset router are divided in equal periods, when it passed a new signal strength LED lights up.
The signal strength LEDs can also be used as a <b>time indicator for holding the reset button</b>. By default, when you press and hold the reset button, after 6 seconds it initiates a <b>Factory reset</b>. If there is a User's default configuration configured on the device, you have to hold it pressed for 6 seconds (by default) to initiate a <b>User's default configuration reset</b> and 12 seconds (by default) to initiate a <b>Factory reset</b>. If the button was held down longer than 20 seconds (by default) no action will be taken.
In case with <b>{{{name}}}</b>, when all {{{sig_led_num}}} signal strength LEDs are lit up, they represent that 5 seconds have passed since you pressed down on the reset button and you can release it now.
While holding the reset button each lit up signal strength LED indicate that a period of two seconds has passed. In case with <b>{{{name}}}</b>, when all {{{sig_led_num}}} signal strength LEDs are lit up, they represent that {{#expr: {{{sig_led_num}}} * 2}} (LED number multiplied by 2) seconds have passed since you pressed down on the reset button.
After releasing the button, all {{{sig_led_num}}} LEDs will start blinking every 1 second. This signifies that the router <b>has begun the factory reset</b>.
After releasing the button at one of the reset periods, all {{{sig_led_num}}} LEDs will start blinking every 1 second. This signifies that the router <b>has begun the reset</b>.
|
|
}}
}}
[[Category:{{{name}}} Manual]]
[[Category:{{{name}}} Manual]]
