Changes

==Compatible modems==

==Compatible modems==

Not all modems support cell locking. To find out if your device is compatible, in your device WebUI, go to '''Status → System''' page. Under the '''Internal modem''' section, you'll see the '''Model''' row:<br>

Not all modems support cell locking. To find out if your device is compatible, in your device WebUI, go to '''Status → System''' page. Under the '''Internal modem''' section, you'll see the '''Model''' row:<br>

[[File:Networking_checking_modem_versions_v1.png|border|class=tlt-border]]<br>

[[File:Cell_locking_find_Modem_model_v2.png|border|class=tlt-border]]<br>

If the model starts with '''EG or EC''', and '''not SLM or RG''', this feature should work. However to make sure it's supported, command '''''gsmctl -A 'AT+QNWLOCK=?'''''' should '''not''' return '''ERROR''', when ran via [[Command_Line_Interfaces_RutOS#SSH|SSH]] or [[Command_Line_Interfaces_RutOS#CLI_.28WebUI.29|CLI]]. The response should look something like this:<br>

If the model starts with '''EG or EC''', and '''not SLM or RG''', this feature should work. However to make sure it's supported, command '''''gsmctl -A 'AT+QNWLOCK=?'''''' should '''not''' return '''ERROR''', when ran via [[Command_Line_Interfaces_RutOS#SSH|SSH]] or [[Command_Line_Interfaces_RutOS#CLI_.28WebUI.29|CLI]]. The response should look something like this:<br>

<pre>

<pre>

Cell ID value can also be checked by going to ''Status → Network → Mobile'' in the router's WebUI:

Cell ID value can also be checked by going to ''Status → Network → Mobile'' in the router's WebUI:

[[File:Networking_check_cell_id.png|border|class=tlt-border]]<br>

[[File:Cell_locking_find_Cell_id_v2.png|border|class=tlt-border]]<br>

''Please keep in mind that Cell ID is displayed in its decimal form on WebUI.''

''Please keep in mind that Cell ID is displayed in its decimal form on WebUI.''