Changes

# '''Internal port''' - YABE port

# '''Internal port''' - YABE port

YABE port can be found looking through the traffic with Wireshark on your PC or TCP dump on RUT1 or RUT2.

'''Note''': YABE port can be found looking through the traffic with Wireshark on your PC or TCP dump on RUT1 or RUT2. If you restart the YABE software or delete and recreate a new communication device, YABE may use a different port number, in which case you must change the port forward configuration in the router connected to your PC.  

 

'''Note''': If you restart the YABE software or delete and recreate a new communication device, YABE may use a different port number, in which case you must change the port forward configuration in the router connected to your PC.  

=== Router 2 ===

=== Router 2 ===

The created port forward rule should look like this:

The created port forward rule should look like this:

[[File:BACnet firewall router2.png|border|center|class=tlt-border|864x620px]]

[[File:BACnet_firewall_router2_new.png|border|center|class=tlt-border|865x625px]]

Everything else can be left as default or changed according to your needs.

Everything else can be left as default or changed according to your needs.