Mobile parameters are needed to measure signal features that can be acquired using
Mobile parameters are needed to measure signal features that can be acquired using
Line 22:
Line 23:
* 1 PC
* 1 PC
* HTTP Server (Hercules)
* HTTP Server (Hercules)
+
+
==Preparation==
+
+
* Prepare RUTX14, power up the device, insert the sim card, check that mobile interface is active and working. SIM1, PWR and signal strength indicators should light up.
+
+
'''Network -> Interfaces''' should look similar to this:
+
+
[[File:Screenshot 1.png|center]]
+
+
==Configuration==
+
+
===Making a Directory and Script===
+
'''1.''' Connect to RUTX14 CLI using PUTTY or WEBUI.
+
+
'''2.''' Create a new directory for the custom script.
+
* mkdir /etc/config/scripts
+
+
[[File:Screenshot 2.png|center]]
+
+
'''3.''' Then create a new .sh file.
+
*touch /etc/config/scripts/<filename>.sh
+
+
[[File:Screenshot 3.png|center]]
+
+
+
'''4.''' To edit the filename, use '''vi <filename>.sh'''. Press '''I'''. To save and exit, '''Press Esc''' then ''':x''' or to exit without saving, '''Press Esc''' then ''':q!'''.