Template:Networking rut2xx firmware change log: Difference between revisions

← Older edit

VisualWikitext

@@ Line 1: / Line 1: @@
-===<b>[[Media:RUT2_R_00.07.03.3_WEBUI.bin|RUT2_R_00.07.03.3]]</b> | 2023.01.24===
+===<b>[[Media:RUT2_R_00.07.04.2_WEBUI.bin|RUT2_R_00.07.04.2]]</b> | 2023.04.18===
+* <b>New</b>
+** nftables support
+* <b>Improvement</b>
+** <b>Network</b>
+*** Added PDP profile registry and LTE SMS format functions & management for the Verizon network
+*** Improved SIM detection algorithm
+*** Improved Multi-APN connection establishment time
+** <b>WebUI</b>
+*** Improved Overview page performance
+** <b>System</b>
+*** Changed hostname to router name
+*** Updated OpenSSL to version 1.1.1t
+*** Updated CA certificates to version 20211016
+*** Updated libiwinfo to version 2022-08-19
+* <b>Fix</b>
+** <b>Network</b>
+*** Fixed IPv4, IPv6 mobile connection restarts
+*** Fixed operator scanning when mobile interface is disabled
+*** Fixed data limit and tracking when software flow offloading is enabled
+*** Added network reload call before bringing the mobile interface up
+*** Fixed Port-based VLAN ID calculation issue
+*** Fixed PDP context authentication when using special characters
+** <b>Services</b>
+*** Fixed event text for configurable inputs/outputs on I/O Juggler
+*** Fixed I/O PIN3 value not changing via MODBUS TCP
+*** Added I/O status request error handling in various WebUI pages when the I/O service is booting up
+*** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
+*** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
+*** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
+*** Fixed OpenVPN keep alive setting migration issue
+*** Fixed PPTP server name setting migration issue
+*** Fixed missing WebUI issue caused by Email Relay installation
+*** Fixed NTP's Operator Station Synchronization memory leak issue
+*** Fixed test email validation
+** <b>System</b>
+*** Fixed libcares vulnerability CVE-2022-4904
+*** Fixed frr vulnerability CVE-2022-37035
+*** Fixed an issue with mobile metric setting migration from legacy FWs to RUTOS
+*** Removed ability for non root users to edit scripts that get executed as root
+===<b>[[Media:RUT2_R_00.07.04.1_WEBUI.bin|RUT2_R_00.07.04.1]]</b> | 2023.03.24===
+* <b>Fix</b>
+** <b>Network</b>
+*** Fixed Data Limit issue
+===<b>[[Media:RUT2_R_00.07.04_WEBUI.bin|RUT2_R_00.07.04]]</b> | 2023.03.07===
+* <b>Improvements</b>
+** <b>WebUI</b>
+*** Improved data persistence between page refreshes
+*** Improved page navigation behavior
+*** Improved redirect logic to open configuration edit modals
+*** Updated the 'Status -> Mobile' page
+*** Updated interface card in the Overview page
+*** Separated Sent and Received data bars on the chart in the Mobile Usage page
+** <b>Network</b>
+*** Added an info message displayed when a faulty SIM card is inserted
+*** Added ResIOT operator's APNs to the APN database
+*** Improved mobile connection re-establishment after reboot
+*** Improved mobile connection recovery in cases where it was lost unexpectedly
+*** Improved 'Deny data roaming' operation when switching between operators
+*** Changed default WiFi AP cipher to CCMP (AES)
+*** Added the logging of MAC addresses rejected by a WiFi AP
+** <b>Services</b>
+*** Added MQTT support to I/O Juggler
+*** Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
+*** Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
+*** Added argument support for the 'Execute custom script' SMS rule
+*** Added a frequency option 'schedule' Modbus Master
+*** Added pagination to Events Reporting overview
+*** Added limit to Events Reporting rule list
+*** Added email logging for Events reporting
+*** 'Sync with browser' button in the NTP page now also synchronizes the time zone
+*** Added a limit of 30 for NTP instances
+*** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
+*** Added "make before break" option to IPsec configuration
+*** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
+*** Improved MODBUS Master connection handling to reduce connection count
+*** Updated modbus request error messages
+*** Added OpenVPN server ip block support
+*** Added MQTT support for MODBUS Master alarms
+*** Added the possibility to get the device's Ethernet port data via SNMP
+** <b>System</b>
+*** Updated bash to version 5.1.16
+*** Added detailed FW update failure error message to Events Log
+*** Improved firmware upload/validation error messages
+*** Updated Turkish language support
+*** Added protocol column to IP block page
+*** Added "vpns.log" file to the Troubleshoot package
+*** Added Wireguard tunnel information to the Troubleshoot package
+*** Updated default admin group access rights
+*** Updated DFOTA notification to show "More info" only when the update is forced
+* <b>Fix</b>
+** <b>WebUI</b>
+*** Fixed MAC address showing on mobile interfaces
+*** Fixed mobile cell ID displaying in hexadecimal
+*** Fixed mobile data limit card creation in the Overview page
+*** Fixed modem widget disappearing from the Overview page
+*** Fixed Services page not displaying data after Thingworx package is installed
+** <b>Network</b>
+*** Fixed interface priority change issue
+*** Fixed a Custom Firewall Rule editing issue
+*** Fixed DMZ configuration saving while it is disabled
+*** Fixed Port Scan script execution failure
+*** Fixed Firewall zone duplication issue
+*** Fixed call function when VoLTE is disabled
+*** Fixed VoLTE control when IMS is not enabled
+*** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
+*** Fixed APN authentication when using empty credentials
+*** Fixed manual APN selection from list
+*** Fixed disabled WiFi interface after factory reset
+*** Fixed WiFi interface creation with SAE mixed encryption
+** <b>Services</b>
+*** Fixed I/O Scheduler overlapping instances issue
+*** Fixed Input/Output image pin colors
+*** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
+*** Fixed WiFi Hotspot landing page uploaded theme image display
+*** Fixed WiFi Hotspot trial user deletion issue
+*** Fixed WiFi Hotspot service crash when associated WiFi interface is not up
+*** Fixed WiFi Hotspot password request by SMS
+*** Fixed WiFi Scanner starting process when the WiFi interface is disabled
+*** Added limitations on message size and quantity of email messages in Email to SMS
+*** Fixed SMTP HELLO value parsing issue
+*** Fixed SMS message window reset button
+*** Fixed not being able to save empty 'Message text' field in Auto Reply
+*** Fixed multi-part SMS concatenation
+*** Fixed multi-part SMS processing
+*** Fixed SMS error message on 'Mobile Data Reset' action
+*** Fixed Data To Server JSON format %n, %N and %s flag issues
+*** Fixed Events Reporting email data clean
+*** Fixed Events Reporting missing config selections
+*** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
+*** Fixed IPsec instance deletion after removing DMVPN package
+*** Fixed IPSec migration via Backup file when DMVPN is configured
+*** Fixed IPsec naming issue when the includes an equals sign
+*** Fixed L2TP client to use correct interface on failover events
+*** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
+*** Fixed MODBUS database size limiting issue
+*** Fixed MODBUS MQTT Gateway client ID input
+*** Fixed MODBUS TCP Slave RSSI value
+*** Fixed MODBUS test button returning errors when several non-connected devices are configured
+*** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
+*** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
+*** Fixed OpenVPN Static Key configuration saving by making Static key upload required
+*** Fixed OpenVPN TLS client creation issue while LAN is down
+*** Fixed Package Manager displaying non-existent packages
+*** Fixed Package Manager errors showing up after successful installations
+*** Fixed Periodic Reboot entry duplication after a power cycle
+*** Fixed PPTP 'Client to client' option not being applied after save
+*** Fixed receiving excessive device state emails after a reboot is initialized over RMS
+*** Fixed WebUI unavailability after unsuccessful package install
+** <b>System</b>
+*** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
+*** Fixed bash vulnerability CVE-2022-3715
+*** Fixed CGI-IO file download vulnerability CVE-2022-38333
+*** Fixed libxml2 vulnerability CVE-2022-40304
+*** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
+*** Fixed LED animation during firmware upgrade
+*** Fixed settings migration issue that caused unreachable Internet after upgrade from a legacy FW version
+*** Fixed an issue with OpenVPN TAP configuration migration from legacy FWs
+*** Improved file upload logic
+*** Fixed GPL firmware compilation with selected Tinc package
+*** Fixed OpenVPN Static Key migration via keep settings issue
+*** Fixed NTP time zone name setting migration when the name contains whitespaces
+*** Fixed language setting issue
+*** Fixed integer validation on industrial services
+*** Fixed LED indications when PDP type is IPv6
+*** Fixed issues with PDP type and SMS limit period migration via keep settings
+===<b>[[Media:RUT2_R_00.07.03.4_WEBUI.bin|RUT2_R_00.07.03.4]]</b> | 2023.02.09===
+* <b>Fix</b>
+** <b>Network</b>
+*** Changed generic modem restart method
+*** Fixed mobile page VoLTE switching issues
+** <b>Services</b>
+*** Sanitized tcpdump storage location
+** <b>System</b>
+*** Fixed legacy backup upload
+*** Fixed upgrade from legacy FW issue with keep settings
+===<b>[[Media:RUT2_R_00.07.03.3_WEBUI.bin|RUT2_R_00.07.03.3]]</b> | 2023.01.25===
 * <b>Fix</b>
 ** <b>Network</b>
-*** Fixed disabled WiFi interface after first boot
+*** Fixed disabled WiFi interface after factory reset
 ===<b>[[Media:RUT2_R_00.07.03.2_WEBUI.bin|RUT2_R_00.07.03.2]]</b> | 2023.01.13===