Jump to content
  • EN

RUT951 Firmware Downloads: Difference between revisions

← Older editNewer edit →
VisualWikitext
No edit summary
No edit summary
(33 intermediate revisions by 3 users not shown)
Line 3: Line 3:
| name        = RUT951
| name        = RUT951
| series      = RUT9M
| series      = RUT9M
<!-----------------------LATEST FW--------------------->
| latest_fw    = RUT9M_R_00.07.02
| latest_date  = 2022.05.19
| latest_md5  = b57855182ee23dfe7f0877f5c6e83f32
<!-----------------------FACTORY FW-------------------->
| factory_fw  = RUT9M_R_00.07.01.5
| factory_date = 2022.03.29
| factory_md5  = ce7788e04fd2c73292c85a373598b7d3
}}
}}


==Changelog==
==Changelog==
===<b>[[Media:RUT9M_R_00.07.04.3_WEBUI.bin|RUT9M_R_00.07.04.3]]</b> | 2023.05.11===
* <b>Improvement</b>
** <b>System</b>
*** Optimized firmware image size
*** Removed SSH RSA key generation
*** Added SSH ECDSA key generation
* <b>Fix</b>
** <b>Network</b>
*** Fixed an issue with mobile when Call Utilities configuration is invalid
*** Fixed clients being unable to connect to wireless AP when multi AP configuration is empty
*** Fixed an issue where sometimes PIN/PUK code was deleted when performing a SIM switch
** <b>Services</b>
*** Fixed incorrect mobile data usage provided to RMS service
** <b>System</b>
*** Fixed an issue on bootloader web recovery hanging with certain firmware sizes
===<b>[[Media:RUT9M_R_00.07.04.2_WEBUI.bin|RUT9M_R_00.07.04.2]]</b> | 2023.04.18===
* <b>New</b>
** nftables support
* <b>Improvement</b>
** <b>Network</b>
*** Added PDP profile registry and LTE SMS format functions & management for the Verizon network
*** Improved SIM detection algorithm
*** Improved Multi-APN connection establishment time
** <b>WebUI</b>
*** Improved Overview page performance
** <b>System</b>
*** Changed hostname to router name
*** Updated OpenSSL to version 1.1.1t
*** Updated CA certificates to version 20211016
*** Updated libiwinfo to version 2022-08-19
* <b>Fix</b>
** <b>Network</b>
*** Fixed IPv4, IPv6 mobile connection restarts
*** Fixed operator scanning when mobile interface is disabled
*** Fixed data limit and tracking when software flow offloading is enabled
*** Added network reload call before bringing the mobile interface up
*** Fixed a segmentation fault issue which would occur occasionally when switching between SIM cards
*** Fixed Port-based VLAN ID calculation issue
*** Fixed PDP context authentication when using special characters
** <b>Services</b>
*** Fixed event text for configurable inputs/outputs on I/O Juggler
*** Fixed I/O PIN3 value not changing via MODBUS TCP
*** Added I/O status request error handling in various WebUI pages when the I/O service is booting up
*** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
*** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
*** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
*** Fixed OpenVPN keep alive setting migration issue
*** Fixed PPTP server name setting migration issue
*** Fixed missing WebUI issue caused by Email Relay installation
*** Fixed NTP's Operator Station Synchronization memory leak issue
*** Fixed test email validation
** <b>System</b>
*** Fixed libcares vulnerability CVE-2022-4904
*** Fixed frr vulnerability CVE-2022-37035
*** Removed ability for non root users to edit scripts that get executed as root
===<b>[[Media:RUT9M_R_00.07.04.1_WEBUI.bin|RUT9M_R_00.07.04.1]]</b> | 2023.03.24===
* <b>Fix</b>
** <b>Network</b>
*** Fixed Data Limit issue
===RUT9M_R_00.07.04_WEBUI.bin | 2023.03.07===
<b>Note:</b> Firmware version <b>RUT9M_R_00.07.04_WEBUI.bin</b> was removed from downloads list due to issues with Mobile Data Limit functionality not working correctly when Software offloading is enabled.
** <b>WebUI</b>
*** Improved data persistence between page refreshes
*** Improved page navigation behavior
*** Improved redirect logic to open configuration edit modals
*** Updated the 'Status -> Mobile' page
*** Updated interface card in the Overview page
*** Separated Sent and Received data bars on the chart in the Mobile Usage page
** <b>Network</b>
*** Added an info message displayed when a faulty SIM card is inserted
*** Added ResIOT operator's APNs to the APN database
*** Improved mobile connection re-establishment after reboot
*** Improved mobile connection recovery in cases where it was lost unexpectedly
*** Improved 'Deny data roaming' operation when switching between operators
*** Changed default WiFi AP cipher to CCMP (AES)
*** Added the logging of MAC addresses rejected by a WiFi AP
** <b>Services</b>
*** Added MQTT support to I/O Juggler
*** Added a frequency option 'schedule' Modbus Master
*** Added pagination to Events Reporting overview
*** Added limit to Events Reporting rule list
*** Added email logging for Events reporting
*** 'Sync with browser' button in the NTP page now also synchronizes the time zone
*** Added a limit of 30 for NTP instances
*** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
*** Added "make before break" option to IPsec configuration
*** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
*** Improved MODBUS Master connection handling to reduce connection count
*** Updated modbus request error messages
*** Added OpenVPN server ip block support
*** Added MQTT support for MODBUS Master alarms
*** Added the possibility to get the device's Ethernet port data via SNMP
** <b>System</b>
*** Updated bash to version 5.1.16
*** Added detailed FW update failure error message to Events Log
*** Improved firmware upload/validation error messages
*** Updated Turkish language support
*** Added protocol column to IP block page
*** Added "vpns.log" file to the Troubleshoot package
*** Added Wireguard tunnel information to the Troubleshoot package
*** Updated default admin group access rights
*** Updated DFOTA notification to show "More info" only when the update is forced
* <b>Fix</b>
** <b>WebUI</b>
*** Fixed MAC address showing on mobile interfaces
*** Fixed mobile cell ID displaying in hexadecimal
*** Fixed mobile data limit card creation in the Overview page
*** Fixed modem widget disappearing from the Overview page
*** Fixed Services page not displaying data after Thingworx package is installed
** <b>Network</b>
*** Fixed interface priority change issue
*** Fixed a Custom Firewall Rule editing issue
*** Fixed DMZ configuration saving while it is disabled
*** Fixed Port Scan script execution failure
*** Fixed Firewall zone duplication issue
*** Fixed call function when VoLTE is disabled
*** Fixed VoLTE control when IMS is not enabled
*** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
*** Fixed APN authentication when using empty credentials
*** Fixed manual APN selection from list
*** Fixed disabled WiFi interface after factory reset
*** Fixed WiFi interface creation with SAE mixed encryption
*** Fixed PDP authentication not working on EC200A modems
** <b>Services</b>
*** Fixed I/O Scheduler overlapping instances issue
*** Fixed Input/Output image pin colors
*** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
*** Fixed WiFi Hotspot landing page uploaded theme image display
*** Fixed WiFi Hotspot trial user deletion issue
*** Fixed WiFi Hotspot service crash when associated WiFi interface is not up
*** Fixed WiFi Hotspot password request by SMS
*** Fixed WiFi Scanner starting process when the WiFi interface is disabled
*** Added limitations on message size and quantity of email messages in Email to SMS
*** Fixed SMTP HELLO value parsing issue
*** Fixed SMS message window reset button
*** Fixed not being able to save empty 'Message text' field in Auto Reply
*** Fixed multi-part SMS concatenation
*** Fixed multi-part SMS processing
*** Fixed SMS error message on 'Mobile Data Reset' action
*** Fixed Data To Server JSON format %n, %N and %s flag issues
*** Fixed Events Reporting email data clean
*** Fixed Events Reporting missing config selections
*** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
*** Fixed IPsec instance deletion after removing DMVPN package
*** Fixed IPSec migration via Backup file when DMVPN is configured
*** Fixed IPsec naming issue when the includes an equals sign
*** Fixed L2TP client to use correct interface on failover events
*** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
*** Fixed MODBUS database size limiting issue
*** Fixed MODBUS MQTT Gateway client ID input
*** Fixed MODBUS TCP Slave RSSI value
*** Fixed MODBUS test button returning errors when several non-connected devices are configured
*** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
*** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
*** Fixed OpenVPN Static Key configuration saving by making Static key upload required
*** Fixed OpenVPN TLS client creation issue while LAN is down
*** Fixed Package Manager displaying non-existent packages
*** Fixed Package Manager errors showing up after successful installations
*** Fixed Periodic Reboot entry duplication after a power cycle
*** Fixed PPTP 'Client to client' option not being applied after save
*** Fixed receiving excessive device state emails after a reboot is initialized over RMS
*** Fixed WebUI unavailability after unsuccessful package install
** <b>System</b>
*** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
*** Fixed bash vulnerability CVE-2022-3715
*** Fixed CGI-IO file download vulnerability CVE-2022-38333
*** Fixed libxml2 vulnerability CVE-2022-40304
*** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
*** Fixed firmware version display
*** Improved file upload logic
*** Fixed GPL firmware compilation with selected Tinc package
*** Fixed OpenVPN Static Key migration via keep settings issue
*** Fixed NTP time zone name setting migration when the name contains whitespaces
*** Fixed language setting issue
*** Fixed integer validation on industrial services
*** Fixed LED indications when PDP type is IPv6
*** Fixed issues with PDP type and SMS limit period migration via keep settings
===<b>[[Media:RUT9M_R_00.07.03.4_WEBUI.bin|RUT9M_R_00.07.03.4]]</b> | 2023.02.09===
* <b>Fix</b>
** <b>Network</b>
*** Changed generic modem restart method
*** Fixed mobile page VoLTE switching issues
*** Fixed CVE-2023-32349 vulnerability
** <b>Services</b>
*** Sanitized tcpdump storage location
===<b>[[Media:RUT9M_R_00.07.03.3_WEBUI.bin|RUT9M_R_00.07.03.3]]</b> | 2023.01.25===
* <b>Fix</b>
** <b>Network</b>
*** Fixed disabled WiFi interface after factory reset
===<b>[[Media:RUT9M_R_00.07.03.2_WEBUI.bin|RUT9M_R_00.07.03.2]]</b> | 2023.01.13===
* <b>New</b>
** <b>System</b>
*** Japanese language
* <b>Improvements</b>
** <b>Network</b>
*** Optimized mobile netifd script installation
* <b>Fix</b>
** <b>Network</b>
*** Shortened modem hang monitor timeout
*** Fixed VLAN option setting when changing VLAN ID
===<b>[[Media:RUT9M_R_00.07.03.1_WEBUI.bin|RUT9M_R_00.07.03.1]]</b> | 2023.01.03===
* <b>Improvements</b>
** <b>System</b>
*** Remove front-end certificate validation
** <b>Network</b>
*** Optimized mobile netifd script installation
* <b>Fix</b>
** <b>Network</b>
*** Fixed modem communication validation
*** Fixed connection establishment in IPv6 only mode
** <b>Services</b>
*** Fixed libxml2 vulnerability CVE-2022-40303
*** Fixed an IPsec Phase one & two setting migration issue
** <b>System</b>
*** Fixed JSON key parsing; keys can now be any printable character sequence
*** Fixed memory leak in 'session' module
** <b>WebUI</b>
*** Fixed file pretty name parsing
===<b>[[Media:RUT9M_R_00.07.03_WEBUI.bin|RUT9M_R_00.07.03]]</b> | 2022.12.16===
* <b>New</b>
** <b>Network</b>
*** Firewall DMZ page
** <b>Services</b>
*** Java package
*** SFTP server support
*** OPC UA client
*** Hotspot registered users management page
** <b>System</b>
*** Portuguese language
*** Spanish language
*** Turkish language
*** Email Relay package
** <b>WebUI</b>
*** New Web menu design
* <b>Improvements</b>
** <b>Network</b>
*** Updated modem handling, attachment, tracking and connection establishment processes
*** Added the possibility to select multiple ports in all firewall port fields
*** Added 'Match' traffic by type option to firewall traffic rules
*** Added DNS servers and routing table fields to the Wireguard page
*** Improved generating network topology
*** Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
*** Update Firewall Traffic Rules page with DSCP and MARK options
*** Added keepalive, holdtime and connect timers to BGP configuration
*** Added 'Use gateway metric' to network protocols web interface
*** Added more DHCPv6 client events to system log
*** Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
*** Added option to select subnet parameters in mobile Passthrough/Bridge modes
*** Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
*** Added mobile connection state for IPv6
*** Added individual WiFi toggle support
*** Added error message when DFS channel is selected during scanning
*** Added switch back to default SIM after SIM Switch service disable
*** Added wget tracking method to WAN Failover
*** Added interface checks to remove inaccurate Failover events from the Event Log
** <b>Services</b>
*** Added CSP headers to Hotspot Landing Page
*** Added hotspot user script validation
*** Improved logging of disconnecting client devices
*** Implemented Hotspot 'forget' method, which removes user from DB by MAC
*** Added execute custom script SMS Utilities rule
*** Added receiver and transceiver mode support to SMPP
*** Added timezone synchronization with GSM operator option to NTP Client
*** Updated Zerotier web interface
*** Added IPsec Flush connection option on tunnel initialization
*** Added MODBUS slave regfile validation
*** Added delay, number of timeouts, always reconnect options to MODBUS Master service
*** Added DMVPN Phase 2 and Phase 3 support
*** Added synchronization counting to NTP client
*** Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
*** Added 'Unregister' button to RMS page
*** Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
*** Updated Zerotier package to version 1.10.1
*** Added automatic package removal upon failed installation in Package Manager
*** Added option to describe custom routing table and MTU auto counting to Wireguard VPN
*** Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
*** Updated sqm-scripts to version 1.5.1
*** Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
*** Added monthly reboot option to periodic reboot function
*** Added support for multiple custom option selection to SSTP configuration
*** Added PKCS12 certificate chain support to OpenVPN
*** Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
*** Added QoS selection to MQTT Modbus Gateway
*** Improved RAM usage during upload and installation of packages via Package Manager
*** Updated curl to version 7.86.0
*** Added brute-force prevention measures to Post/Get
*** Added automatic private and public key generation to Wireguard VPN
*** Added multiple Remote source IP support to IPsec
*** Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
*** Added functionality to rotate log file when log is saved to Flash memory
*** Improved performance while fetching packages on repeat visits to the Package Manager page
** <b>System</b>
*** Added a 'test mail' button to the Administration -> Recipients page
*** Added option to clear blocked IPs in the Access Control page after reboot
*** Updated Web Request-Response core logic
*** Added certificate validation to all services that support certificate upload
*** Updated URL protocol validations
*** Removed profile update requests during Save & apply
*** Optimized profile switching logic
** <b>WebUI</b>
*** Added an indication to the Interfaces page that displays when data limit is enabled
*** Added bootloader version to the Device section in the System page
*** Added configuration page shortcuts to Overview page widgets
*** Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
*** Updated network interfaces protocols web interface
*** Updated 404 page to include navigation menu
* <b>Fix</b>
** <b>Network</b>
*** Fixed CVE-2023-32350 vulnerability
*** Fixed jumbo frames MTU issue
*** Added the 'Any' choice to source & destination IP address field in NAT rule edit
*** Fixed NHRP web interface issues
*** Fixed WAN interface configuration interfering with LAN
*** Fixed mdcollect memory leak issue
*** Fixed data limit not resetting properly
*** Fixed incorrect mobile data usage calculations for multiple day periods
*** Fixed an Auto APN 'Keep settings' issue
*** Fixed data counting after mobile data limit has been reached
*** Fixed mobile band not setting correctly on first try
*** Fixed incorrect data limit conditions causing unwanted SIM switches
*** Fixed Passthrough DHCP lease time setting
*** Fixed mobile bridge mode issue when no DNS servers are supplied
*** Added new Operator Lists instance name validations
*** Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722
*** Fixed wireless interfaces connections not reestablishing after disabling & enabling again
*** Fixed SIM Switch issue on newly created mobile interfaces
*** Fixed switch back to primary SIM rule disable when the default SIM is changed
*** Fixed incorrect SIM Switch behavior on low signal value
*** Fixed handling of WAN/LAN port state changes
*** Fixed Wired WAN connectivity issue when Failover interfaces are disabled
*** Fixed Failover fallback issue
** <b>Services</b>
*** Fixed relay state switching
*** Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
*** Added I/O restart on configuration profile change
*** Fixed I/O voltage range display for power socket pins
*** Fixed SMNP OID for I/O state
*** Fixed I/O Juggler SMS text message Save & Apply issue
*** Fixed Hotspot connected user list maximum upload/download value limits
*** Fixed incorrect connected Hotspot user information in RMS JSON
*** Removed unnecessary field from the Port Mirroring page
*** Fixed Events Reporting 'Changing to SIM1/SIM2' options
*** Fixed Hotspot issues related to specific connected phones
*** Fixed Wireless AP enabled by MODBUS TCP Master not showing in Wireless clients
*** Fixed WiFi Scanner hostname validation issues
*** Fixed UCI SMS Rule return message to display new changes
*** Fixed DNP3 issues when asking for modem temperature
*** Fixed base64 encoding of SMS messages when forwarding to HTTP
*** Fixed SMS sending issues when using multiple APN
*** Added Gateway modem option to IP Block and WoL in SMS Rule edit
*** Fixed unblocking IP addresses with an SMS message
*** Fixed Mobile Utilities page not load properly on some occasions
*** Fixed dbus vulnerability CVE-2020-35512
*** Fixed dnsmasq vulnerability CVE-2022-0934
*** Fixed ext4 vulnerability CVE-2021-3428
*** Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594
*** Fixed libxm12 vulnerability CVE-2022-29824
*** Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
*** Fixed MQTT DoS vulnerability CVE-2021-41039
*** Fixed privoxy vulnerability CVE-2021-44542
*** Fixed python3 vulnerability CVE-2022-42919
*** Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
*** Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
*** Fixed switching between RMS connection types while the device is unregistered
*** Fixed reload issues in website blocking feature
*** Fixed IPsec PSK secret required field validation
*** Fixed bandwidth limiting after QoS is enabled for the first time
*** Fixed Dropbear issues when logging in over IPv6
*** Fixed Modbus status in Status -> Services page
*** Fixed Azure IoT Hub application issues when sending large volumes of data
*** Fixed Azure IoT Hub MQTT password validation
*** Fixed DMVPN configuration migration issue
*** Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
*** Fixed DMVPN IPsec connection issue
*** Fixed DMVPN mobile interface 'Keep settings' migration issue
*** Fixed Dynamic DNS long hostname text display issue
*** Fixed Events Reporting memory leak issue
*** Fixed Events Reporting not triggering after flipping an I/O slider
*** Fixed FOTA cron job not starting after factory reset
*** Fixed IPsec local firewall option parsing
*** Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
*** Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
*** Fixed NTP pool hostname validation
*** Fixed OpenVPN certificate remove with Static key and TLS authentication methods
*** Fixed OpenVPN configuration saving issue when using HMAC key authentication
*** Fixed OpenVPN custom dev name transformation to correct format
*** Fixed OpenVPN device name setting logic when uploading config from file
*** Fixed OpenVPN instance status display
*** Fixed OpenVPN TAP (bridged) configuration detection
*** Fixed Qos configuration saving issue occurring after instance deletion
*** Fixed RMS JSON incorrect WAN state and IP information
*** Fixed RMS step access issue in the Setup Wizard page
*** Fixed SNMP issues after reboot while using a Hotspot
*** Fixed SNMP generating MIB files for devices in accordance with to their hardware
*** Fixed SNMP traps not working after SNMP is installed from server
*** Fixed SSTP client route creation issue
*** Fixed UPNP secure mode not turning off issue
*** Fixed Wireguard route to endpoint issue
*** Fixed manual package installation for queued packages
*** Fixed NAT Rules dependency from IPsec web instance
*** Returned usleep utility
*** Updated Australian and South African NordVPN server IP addresses
** <b>System</b>
*** Fixed certificate signing issues
*** Fixed Telnet, CLI access blocking after max invalid tries
*** Fixed FW upgrade with 'Keep settings' while low free space is available
*** Fixed backup file duplication issue
*** Fixed network device handling in system
*** Fixed User default settings not restoring issue
*** Fixed LED operation during FW flashing
*** Fixed LED operation while device is in bootloader state
** <b>WebUI</b>
*** Fixed Hotspot interface display
*** Fixed side widget accessibility during first login
*** Fixed file upload issues
*** Fixed drag and drop issue in the Traffic Rules page
*** Fixed protocol display in the overview of the Interfaces page
*** Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
*** Fixed login errors after browser tab restoration
*** Fixed redirect to newly set IP address after Interface configuration
*** Fixed firmware upgrade verify spinner not closing
*** Fixed an issue with file upload via drag and drop
===<b>[[Media:RUT9M_R_00.07.02.9_WEBUI.bin|RUT9M_R_00.07.02.9]]</b> | 2022.11.14===
* <b>New features</b>
** RNDIS and related drivers
* <b>Fixes</b>
** Added validation that prevents a downgrade below version 7.2.9
** Fixed libgsm segfault on modem application FW function
** Fixed handling of state changes for LAN/WAN ports
===<b>[[Media:RUT9M_R_00.07.02.7_WEBUI.bin|RUT9M_R_00.07.02.7]]</b> | 2022.09.12===
* <b>Improvements:</b>
** Improved manual-auto connection mode
* <b>Fixes</b>
** Fixed AT command for SMS storage usage
** Fixed CVE-2022-1012 memory leak vulnerability
** Fixed CVE-2022-37434 kernel vulnerability
** Fixed interface option reset after VLAN ID change
** Removed memory leak on port events
** Fixed WiFi Scanner out of range crash when iterating collected data
===<b>[[Media:RUT9M_R_00.07.02.6_WEBUI.bin|RUT9M_R_00.07.02.6]]</b> | 2022.08.24===
* <b>Improvements:</b>
** Added 'home.vodafone.de' APN
** Improved stability of device information storage
* <b>Fixes:</b>
** Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
** Fixed Serial-symlink dmesg messages
** Fixed VoLTE management
** Fixed OpenVPN tls-auth and tls-crypt option names
===<b>[[Media:RUT9M_R_00.07.02.5_WEBUI.bin|RUT9M_R_00.07.02.5]]</b> | 2022.08.12===
* Improvements:
** Updated curl to version 7.83.1
** Updated firmware validation error messages
** Added multiple source IP address support to the Port Forwards page
** Increased custom APN Username & Password field maximum length to 64 symbols
** Added auto switch to modem's SMS storage when SIM card storage doesn't exist
** Improved mobile connection status handling
** Added CSP headers Hotspot WebUI landing page
* Fixes:
** Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
** Fixed CVE-2022-30065 busybox vulnerability
** Fixed file upload path traversal
** Removed Data to Server limit to proccess less than 10 instances
** Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
** Fixed OpenVPN dev setting logic
** Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
** Fixed MAC and leasetime setting for Bridge & Passthrough modes
** Fixed modal tabs navigation when editing wireless interface with non-english languages
** Fixed LAC/TAC parsing in 4G mode
===<b>[[Media:RUT9M_R_00.07.02.4_WEBUI.bin|RUT9M_R_00.07.02.4]]</b> | 2022.07.20===
* Improvements:
** Added default password change warning message before firmware downgrade
** Extended time period for device to make connection to operator
** Reduced the number of modem reboots when changing mobile settings
** Reduced excessive log output when no SIM card is inserted
** Added modem restart prevention on modem init
** Added disable RPLMN option in the SIM section of the SIM card config
* Fixes:
** Fixed CVE-2022-2068 vulnerability
** Disabled autoconnect on stop-network call
** Fixed Hotspot login via landing page issue
** Fixed FOTA communication issues
===<b>[[Media:RUT9M_R_00.07.02.3_WEBUI.bin|RUT9M_R_00.07.02.3]]</b> | 2022.06.27===
* New Features:
** Port Mirroring
* Improvements:
** Added ping to DNS IPv6 support
** Added modem reset to default state after device FW upgrade
** Modem init now checks NVRAM sensitive commands before setting
** GSM output was made consistent
** Updated FSTools package to version 2022-05-03
** Added security headers to web requests
** Added default VoLTE value
** Specified IP address family on operator control's ping to DNS feature
* Fixes:
** Fixed CVE-2019-12900 libbz2 vulnerability
** Fixed behavior of some gsmctl commands
** Fixed CVE-2022-23303 hostapd vulnerability
** Fixed CVE-2022-29581 Linux kernel vulnerability
** Fixed CVE-2022-29458 ncurses vulnerability
** Fixed CVE-2022-1292 c_rehash script command injection vulnerability
** Fixed band locking issue
** Fixed race condition for wireless configuration initialization
** Fixed operator control issue
** Fixed VoLTE management issue
** Fixed SIM card checking on modem init
===<b>[[Media:RUT9M_R_00.07.02.1_WEBUI.bin|RUT9M_R_00.07.02.1]]</b> | 2022.06.06===
* Improvements:
** Improved GSM related messages in Troubleshoot logs
* Fixes:
** Fixed IGMP Proxy menu item not appearing after package installation
** Fixed default mobile network configuration generation
** Fixed MODBUS write requests and Mobile Utils option setting


===<b>[[Media:RUT9M_R_00.07.02_WEBUI.bin|RUT9M_R_00.07.02]]</b> | 2022.05.10===
===<b>[[Media:RUT9M_R_00.07.02_WEBUI.bin|RUT9M_R_00.07.02]]</b> | 2022.05.10===
Retrieved from "https://wiki.teltonika-networks.com/view/RUT951_Firmware_Downloads"