569
edits
Changes
L2 LAN bridging over internet using L2TPv2+EoIP (view source)
Revision as of 14:57, 2 August 2023
, 14:57, 2 August 2023no edit summary
==Topology==
==Topology==
[[File:Networking rutxxx configuration examples l2tp+ eoip rut configuration topology v2.png|border|class=tlt-border|1100px]]
==Prerequisites==
==Prerequisites==
We will start by configuring the L2TP client. Open your device's WebUI and navigate to '''Services → VPN → L2TP''', add a new '''L2TP client''', once the configuration window opens, configure the client accordingly:
We will start by configuring the L2TP client. Open your device's WebUI and navigate to '''Services → VPN → L2TP''', add a new '''L2TP client''', once the configuration window opens, configure the client accordingly:
[[File:Networking rutxxx configuration examples l2tp rut configuration v2.png|border|class=tlt-border|1100px]]
[[File:Networking rutxxx configuration examples l2tp rut configuration v1.png|border|class=tlt-border|1100px]]
# '''Enable''' the configuration
# '''Enable''' the configuration
----
----
===Firewall configuration===
===Firewall configuration===
Once again we will need to open the WebUI of the Teltonika device and navigate to the '''Network → Interfaces → General''' Edit your '''LAN''' interface and change '''Protocol''' to '''DHCP'''.
Once again we will need to open the WebUI of the Teltonika device and navigate to the '''Network → Interfaces → General''' Edit your '''LAN''' interface and change '''Protocol''' to '''DHCP'''.
[[File:Networking rutxxx configuration examples LAN config v1.png|border|class=tlt-border|1100px]]
[[File:Networking rutxxx configuration examples l2tp rut configuration v2.png|border|class=tlt-border|1100px]]
[[File:Networking rutxxx configuration examples LAN config v2.png|border|class=tlt-border|1100px]]
[[File:Networking rutxxx configuration examples LAN config v2.png|border|class=tlt-border|1100px]]
Next we will configure EoIP on the MikroTik side, for that navigate to '''Interfaces → EoIP tunnel''' Add New interface and configure accordingly:
Next we will configure EoIP on the MikroTik side, for that navigate to '''Interfaces → EoIP tunnel''' Add New interface and configure accordingly:
[[File:Networking rutxxx configuration examples EoIP MikroTik v1.png|border|class=tlt-border]]
[[File:Networking rutxxx configuration examples EoIP MikroTik v2.png|border|class=tlt-border]]
# Enable the interface
# Enable the interface
[https://wiki.mikrotik.com/wiki/Manual:Interface/EoIP MikroTik EoIP]
[https://wiki.mikrotik.com/wiki/Manual:Interface/EoIP MikroTik EoIP]
[[Category:VPN]]
