569
edits
Changes
Teltonika EYE device pairing and data sender configuration example (view source)
Revision as of 17:00, 3 August 2023
, 17:00, 3 August 2023no edit summary
Connection topology in this case is simple, we are going to send Bluetooth data from either '''EYE sensor''' or '''EYE beacon''' using [[RUTX11_Data_to_Server|Data to server]] functionality. More detailed topologies are presented in the configuration sections.
Connection topology in this case is simple, we are going to send Bluetooth data from either '''EYE sensor''' or '''EYE beacon''' using [[RUTX11_Data_to_Server|Data to server]] functionality. More detailed topologies are presented in the configuration sections.
[[File:Bluetootheyesensorconfiguration topology v1.png|600px|border|class=tlt-border]]
[[File:Bluetootheyesensorconfiguration topology v1.png|800px|border|class=tlt-border]]
==Adjusting EYE device protocol and settings==
==Adjusting EYE device protocol and settings==
==Bluetooth Data to Server via MQTT protocol==
==Bluetooth Data to Server via MQTT protocol==
In this section, we are going to upload Bluetooth data to server using MQTT Protocol. Prerequisites for this example:
In this section, we are going to upload Bluetooth data to server using MQTT Protocol. Here is the connection topology to help you understand things better:
[[File:Eyedevice mqttsection.png|border|800px|class=tlt-border]]
Prerequisites for this example:
*MQTT Broker
*MQTT Broker
*MQTT Subscriber
*MQTT Subscriber
==Bluetooth Data to Server using HTTP protocol==
==Bluetooth Data to Server using HTTP protocol==
In this section, we are going to upload Bluetooth data to server using HTTP Protocol. We are going to use a [https://www.hw-group.com/software/hercules-setup-utility Hercules] app as a TCP server to get Bluetooth sensor data from the device.
In this section, we are going to upload Bluetooth data to server using HTTP Protocol. Here is the connection topology to help you understand things better:
[[File:Eyedevices Httpserversection.png|border|800px|class=tlt-border]]
We are going to use a [https://www.hw-group.com/software/hercules-setup-utility Hercules] app as a TCP server to get Bluetooth sensor data from the device.
===Data sender setup===
===Data sender setup===
[https://www.hw-group.com/software/hercules-setup-utility Hercules] - Hercules TCP Client / Server application
[https://www.hw-group.com/software/hercules-setup-utility Hercules] - Hercules TCP Client / Server application
[[Category:Hardware application]]