31
edits
Changes
Wireguard Peer To Peer Configuration example (view source)
Revision as of 09:55, 5 September 2023
, 09:55, 5 September 2023WireGuard Peer To Peer Configuration
<nowiki>==Introduction==</nowiki>
Introduction to a Peer-to-Peer WireGuard configuration example, this also covers LAN-TO-LAN connectivity aspect as well.
<nowiki>'''WireGuard'''</nowiki> is simple, fast, lean, and modern VPN that utilizes secure and trusted cryptography.
This page will show you an example on how to configure a basic tunnel between WireGuard interface and its peers.
<nowiki><u><b>Note:</b></nowiki> WireGuard is additional software that can be installed from the <nowiki><b>Services → Package Manager</b></nowiki> page<nowiki></u></nowiki> (in RUT9/RUT2 this page is located in <nowiki><b>System → Package Manager</b></nowiki>).
<nowiki>==Prerequisites==</nowiki>
<nowiki>----</nowiki>
For this example you need:
<nowiki><ul></nowiki>
<nowiki><li>Three RUTOS devices</li></nowiki>
<nowiki><li>An end device to configure devices (PC, Laptop, Tablet or Smartphone) </li></nowiki>
<nowiki><li>One end device must have </nowiki>'''Public''' IP address<nowiki></li></nowiki>
<nowiki><ul></nowiki>
<nowiki>----</nowiki>
<nowiki>==WireGuard Instances==</nowiki>
To create Instance enter its name and click the <nowiki><b>Add</b></nowiki> button.
Then click the <nowiki><b>Edit</b></nowiki> <nowiki>[[File:Networking_rutx_manual_edit_button_v1.png]]</nowiki> button to configure it.
<nowiki>[[File: Wireguard.png]]</nowiki>
<nowiki>[[File: Wireguard_Add.png]]</nowiki>
Introduction to a Peer-to-Peer WireGuard configuration example, this also covers LAN-TO-LAN connectivity aspect as well.
<nowiki>'''WireGuard'''</nowiki> is simple, fast, lean, and modern VPN that utilizes secure and trusted cryptography.
This page will show you an example on how to configure a basic tunnel between WireGuard interface and its peers.
<nowiki><u><b>Note:</b></nowiki> WireGuard is additional software that can be installed from the <nowiki><b>Services → Package Manager</b></nowiki> page<nowiki></u></nowiki> (in RUT9/RUT2 this page is located in <nowiki><b>System → Package Manager</b></nowiki>).
<nowiki>==Prerequisites==</nowiki>
<nowiki>----</nowiki>
For this example you need:
<nowiki><ul></nowiki>
<nowiki><li>Three RUTOS devices</li></nowiki>
<nowiki><li>An end device to configure devices (PC, Laptop, Tablet or Smartphone) </li></nowiki>
<nowiki><li>One end device must have </nowiki>'''Public''' IP address<nowiki></li></nowiki>
<nowiki><ul></nowiki>
<nowiki>----</nowiki>
<nowiki>==WireGuard Instances==</nowiki>
To create Instance enter its name and click the <nowiki><b>Add</b></nowiki> button.
Then click the <nowiki><b>Edit</b></nowiki> <nowiki>[[File:Networking_rutx_manual_edit_button_v1.png]]</nowiki> button to configure it.
<nowiki>[[File: Wireguard.png]]</nowiki>
<nowiki>[[File: Wireguard_Add.png]]</nowiki>
