92
edits
Changes
RUTX12 Traffic control with Firewall WANzone Splitting (view source)
Revision as of 13:33, 14 September 2023
, 13:33, 14 September 2023.
* Source zone change to "'''WAN2:mob1s2a1"'''
* Source zone change to "'''WAN2:mob1s2a1"'''
* Specify the source zone for which the SIM Interface is intended. In the provided instance, this would be '''SIM2''' labelled as "'''mob2s1a1'''".
* Specify the source zone for which the rule Interface is intended.
* Choose the '''MAC address''' associated with the host to which the rule is to be applied in the source MAC address section. If needed, you can input a custom MAC address.
* Choose the '''MAC address''' associated with the host to which the rule is to be applied in the source MAC address section. If needed, you can input a custom MAC address.
* Input the '''IP address''' of the host in the source IP address field.
* Input the '''IP address''' of the host in the source IP address field.
* Specify the destination zone target zone of the incoming connection, this would be '''SIM2''' labelled as '''"WAN2:mob1s2a1"'''.
* Within the action field, opt for '''<nowiki/>'Reject''''.
* Within the action field, opt for '''<nowiki/>'Reject''''.
* Click on '''<nowiki/>'Save and Apply''''.
* Click on '''<nowiki/>'Save and Apply''''.
