TSW202 LEDs: Difference between revisions

From Teltonika Networks Wiki
No edit summary
m (Vainius.l moved page Draft:TSW202 LEDs to TSW202 LEDs without leaving a redirect)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
{{Template:Networking tswos_manual_leds  
{{Template:Networking tswos_manual_leds  
| name = TSW212
| name = TSW202
| series = TSW2xx
| series = TSW2
| file_power_led = Networking tsw212 manual panels front v1.png
| file_power_led = Networking_tsw202_manual_power_led.png
| size_power_led = 400
| size_power_led = 400
| file_profinet_led = Networking_tsw202_manual_profinet_led.png
| size_profinet_led = 400
| eth_leds = 1
| eth_leds = 1
| file_eth_led = Networking_tsw200_manual_ethernet_port_LED_v2.png
| file_eth_led = Networking_tsw200_manual_ethernet_port_LED_v2.png

Latest revision as of 07:32, 25 October 2023

Main Page > TSW Switches > TSW202 > TSW202 Manual > TSW202 LEDs

This wiki page contains information about TSW202 switch LEDs and their actions.

Power LED

The power LED is located on the bottom left corner of the back panel, near the power connector:

It can perform two different actions:

Action Description
LED turned ON Switch is powered up
LED turned OFF Switch is not power up

PROFINET/ST/AUX LED

The PROFINET/ST/AUX LED is located on the bottom right corner of the back panel, near the SFP connectors:

It can perform two different actions:

Action Description
LED turned ON Profinet service is turned on
LED turned OFF Profinet service is turned off

Ethernet port

No. Action Describtion
1 Orange LED lit 10/100 Mbps link established
2 Orange LED blinking Active link connection
3 Green LED lit 1000 Mbps link established

SFP port

No. Action Describtion
1 Down LED lit Lower port link established
2 Down LED blinking Lower port active traffic
3 Up LED lit Upper port link established
4 Up LED blinking Upper port active traffic