TSW202 LEDs: Difference between revisions
No edit summary |
m (Vainius.l moved page Draft:TSW202 LEDs to TSW202 LEDs without leaving a redirect) |
(No difference)
| |
Latest revision as of 07:32, 25 October 2023
Main Page > TSW Switches > TSW202 > TSW202 Manual > TSW202 LEDsThis wiki page contains information about TSW202 switch LEDs and their actions.
Power LED
The power LED is located on the bottom left corner of the back panel, near the power connector:
It can perform two different actions:
| Action | Description |
|---|---|
| LED turned ON | Switch is powered up |
| LED turned OFF | Switch is not power up |
PROFINET/ST/AUX LED
The PROFINET/ST/AUX LED is located on the bottom right corner of the back panel, near the SFP connectors:
It can perform two different actions:
| Action | Description |
|---|---|
| LED turned ON | Profinet service is turned on |
| LED turned OFF | Profinet service is turned off |
Ethernet port
| No. | Action | Describtion |  |
|---|---|---|---|
| 1 | Orange LED lit | 10/100 Mbps link established | |
| 2 | Orange LED blinking | Active link connection | |
| 3 | Green LED lit | 1000 Mbps link established | |
SFP port
| No. | Action | Describtion |  |
|---|---|---|---|
| 1 | Down LED lit | Lower port link established | |
| 2 | Down LED blinking | Lower port active traffic | |
| 3 | Up LED lit | Upper port link established | |
| 4 | Up LED blinking | Upper port active traffic | |