RUTX09 OPC UA Server: Difference between revisions

Latest revision as of 08:35, 2 January 2024

Main Page > RUTX Routers > RUTX09 > RUTX09 Manual > RUTX09 WebUI > RUTX09 Services section > RUTX09 OPC UA Server

The information in this page is updated in accordance with firmware version RUTX_R_00.07.11.3.

Summary

OPC Unified Architecture (OPC UA) is a cross-platform, open-source, IEC62541 standard for data exchange from sensors to cloud applications developed by the OPC Foundation. The UA in OPC UA stands for “Unified Architecture” and refers to the latest specification of the standard. It differs from its predecessor in that it is platform-independent, moving away from COM/DCOM to purely binary TCP/IP or alternatively SOAP.

This manual page provides an overview of the OPC UA Server in RUTX09 devices.

Note: OPC UA Server is additional software that can be installed from the System → Package Manager page.

Status

This section displays OPC UA Server status information.

OPC UA Server Configuration

The OPC UA Server Configuration section is used to enable the local OPC UA server.

Field	Value	Description
Enable	off \| on; default: off	Enables OPC UA server.
Port	integer [1..65535]; default: none	Service port.

OPC UA Server variables

All RUTOS device variables are described in the table below:

Note: All the variables have these qualities in common:

Namespace index is 1
Node ID type is string
Read-only
Updated upon request

ID	Type	Description
sys_uptime	UINT32	System uptime in seconds.
sys_serial	String	Device serial number.
sys_devname	String	Device name.
sys_devcode	String	Device code.
sys_version	String	Firmware version.
sys_hostname	String	Hostname.
lan_mac	String	LAN MAC address.
lan_ip	String	IP address of LAN interface.
lan_mask	String	Subnet mask of LAN interface.
lan_gateway	String	Gateway IP address of LAN interface.
lan_dns	Array of String	IP addresses of LAN interface DNS servers.
rut_wan_ip	String	IP address if WAN is connected.
rut_wan_type	String	Values of WAN type.
io_din	Array of BOOL	Values of digital input pins.
io_dout	Array of BOOL	Values of digital output pins.
gps_fix_status	UINT32	Whether a GPS connection has been acquired.
gps_timestamp	UINT64	UTC timestamp.
gps_longitude	DOUBLE	Longitude.
gps_latitude	DOUBLE	Latitude.
gps_altitude	DOUBLE	Altitude.
gps_angle	DOUBLE	Angle.
gps_speed	DOUBLE	Speed.
gps_accuracy	DOUBLE	Accuracy.
gps_sat_count	UINT32	Satellite count.
mob_modem_count	UINT32	Modem count.
mob_modem_imei	Array of String	Modem IMEI.
mob_modem_serial	Array of String	Modem serial number.
mob_modem_mnf	Array of String	Modem manufacturer name.
mob_modem_model	Array of String	Modem model name.
mob_modem_fw	Array of String	Modem firmware version string.
mob_modem_temp	Array of FLOAT	Modem temperature.
mob_sim_count	Array of UINT32	SIM count.
mob_sim	Array of UINT32	Selected SIM.
mob_sim_state	Array of String	SIM state.
mob_sim_iccid	Array of String	SIM ICCID.
mob_rssi	Array of INT32	RSSI.
mob_conn_type	Array of String	Data carrier type.
mob_conn_state	Array of String	Connection state.
mob_net_state	Array of String	Network link state.
mob_operator	Array of String	Operator name.

@@ Line 1: / Line 1: @@
 {{Template:Networking_rutos_manual_opcua_server
 <!------------------------DEVICE----------------------->
- | name   = RUTX09
+| name   = RUTX09
- | series = RUTX
+| series = RUTX
- <!----------------------SEPARATORS--------------------->
+<!----------------------SEPARATORS--------------------->
- | digitalio      = 0 <!----------------------Digital inputoutput.--------------------->
+| digitalio      = 1 <!----------------------Digital inputoutput.--------------------->
- | configurableio = 0 <!----------------------Configurable inputoutput.--------------------->
+| configurableio = 0 <!----------------------Configurable inputoutput.--------------------->
- | relay          = 0
+| relay          = 0
- | adc            = 0
+| adc            = 0
- | gps            = 0
+| gps            = 1
- | mobile         = 0
+| mobile         = 1
 }}