1,223
edits
Changes
Template:Networking rutos manual wireless (view source)
Revision as of 13:42, 2 January 2024
, 2 Januaryno edit summary
</tr>}}
</tr>}}
</table>
</table>
=====Additional Settings=====
----
[[File:Networking rutos manual wireless interface configuration additional settings access point v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<th>Access point</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Hide SSID</td>
<td>on {{!}} off; default: <b>off</b></td>
<td>Hide Service Set Identifier </td>
</tr>
<tr>
<td>Isolate Clients</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Prevents client to client communication on the same subnet.</td>
</tr>
<tr>
<td>802.11v BSS Transition Management</td>
<td>on {{!}} off; default: <b>off</b></td>
<td>A suggestion (or advice) given to a client, which the client can choose to follow or ignore</td>
</tr>
<tr>
<td>802.11k Radio Resource Measurement</td>
<td>on {{!}} off; default: <b>off</b></td>
<td>Helps devices search quickly for nearby APs that are available as roaming targets by creating an optimized list of channels.</td>
</tr>
<tr>
<td>Disassociate On Low Acknowledgement</td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
</tr>
</table>
{{#switch:{{{series}}}|TAP100|TAP200=|#default=
----
[[File:Networking rutos manual wireless interface configuration additional settings client multi ap v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<th>Client & Multi AP</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Disassociate On Low Acknowledgement</td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
</tr>
<tr>
<td>Enable fast roaming</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Requests background scans for the purpose of roaming within an ESS.</td>
</tr>
</table>
----
[[File:Networking rutos manual wireless interface configuration mesh additional settings v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<th>Mesh</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Forward mesh peer traffic </td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Enables mesh peer traffic forwarding.</td>
</tr>
<tr>
<td>RSSI threshold for joining </td>
<td>integer [0..1]; default: <b>0</b></td>
<td>0 = not using RSSI threshold, 1 = do not change driver default.</td>
</tr>
<tr>
<td>Enable fast roaming</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Requests background scans for the purpose of roaming within an ESS.</td>
</tr>
<tr>
<td>Disassociate On Low Acknowledgement</td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
</tr>
</table>}}
{{#switch:{{{series}}}|TAP100|TAP200=|#default= =====Wireless Security=====
{{#switch:{{{series}}}|TAP100|TAP200=|#default= =====Wireless Security=====
<th></th>
<th></th>
<th></th>
<th></th>
</tr>
</tr>
<tr>
<tr>
<td>positive integer; default: <b>none</b> </td>
<td>positive integer; default: <b>none</b> </td>
<td>Association will be refused if a client/station attempts to associate with a listen interval greater than this value.</td>
<td>Association will be refused if a client/station attempts to associate with a listen interval greater than this value.</td>
</tr>{{#switch:{{{series}}}|TAP100|TAP200=|#default=
</tr>{{#switch:{{{series}}}|TAP100|TAP200=|#default=
<tr>
<tr>
Lastly, in '''Advanced Settings''' tab enable '''Forward mesh peer traffic''' and set '''RSSI threshold for joining''' to -80. Leave the rest as set by default.
Lastly, in '''Advanced Settings''' tab enable '''Forward mesh peer traffic''' and set '''RSSI threshold for joining''' to -80. Leave the rest as set by default.
[[File:Networking rutos manual wireless mesh gateway 3_v3.png|Networking rutos manual wireless mesh gateway advanced settings|border|class=tlt-border]]
[[File:Networking rutos manual wireless mesh gateway 3_v4.png|Networking rutos manual wireless mesh gateway advanced settings|border|class=tlt-border]]
Click '''Save & Apply''' and if you configured correctly, you will have wireless mesh gateway ready.
Click '''Save & Apply''' and if you configured correctly, you will have wireless mesh gateway ready.
=====Mesh Node=====
=====Mesh Node=====
Mesh node is configured the same way as mesh gateway. Node has to match gateway's wireless mesh interface configuration. Additionally, LAN interface has to be setup as DHCP client:
Mesh node is configured the same way as mesh gateway. Node has to match gateway's wireless mesh interface configuration. Additionally, WAN interface has to be setup as DHCP client:
1. Access router‘s WebUI. Navigate to Network → WAN.
2. Press edit button on the right of the WAN interface.
[[File:Networking rutx11 configuration example wireless mesh mesh node configuration 1 v5.png|border|class=tlt-border]]
3. Change Protocol to DHCP and select necessary device . Click '''Save & Apply''' and If everything was setup correctly, mesh node should be ready use.
Click '''Save & Apply''' and If everything was setup correctly, mesh node should be ready use.
====Multi AP====
====Multi AP====
The <b>Multi AP</b> feature is used to configure access to multiple wireless access points from one page. To create Multi AP wireless interface click the 'Add' button below of wireless interface in the Network → Wireless page:
The <b>Multi AP</b> feature is used to configure access to multiple wireless access points from one page. To create Multi AP wireless interface click the 'Add' button below of wireless interface in the Network → Wireless page:
[[File:Networking rutos manual wireless mesh gateway add button v4.png|border|class=tlt-border]]
[[File:Networking rutos manual wireless mesh gateway add button v5.png|border|class=tlt-border]]
In General Setup tab change Mode to Multi AP, select desired Network which will be attached to the interface. You can also select scan time and upload file with Access Points list.
In General Setup tab change Mode to Multi AP, select desired Network which will be attached to the interface. You can also select scan time and upload file with Access Points list.
[[File:Networking_rutos_manual_wireless_multi_ap_create_network_v2.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_wireless_multi_ap_create_network_v3.png|border|class=tlt-border]]
=====Access Points=====
=====Access Points=====
You can either configure multiple <b>access points</b> from this page of the WebUI or you can upload a file with a list of access point configurations. The file should contains WiFi access point configuration options and values, which should be defined as <b>option: value</b> (for example, <i>ssid: home_wifi</i>). The SSID option is mandatory.
You can either configure multiple <b>access points</b> from this page of the WebUI or you can upload a file with a list of access point configurations. The file should contains WiFi access point configuration options and values, which should be defined as <b>option: value</b> (for example, <i>ssid: home_wifi</i>). The SSID option is mandatory.
[[File:Networking_rutos_manual_wireless_multi_ap_access_points.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_wireless_multi_ap_access_points_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
Each WiFi interface has a specially designed QR code that contains information about the SSID and password of the WiFi network. After pressing the button [[File:Networking_rutos_manual_wireless_qr_code_button.png]], a QR code appears with the network's SSID and password, which you can download locally by pressing the 'Download' button. If you only want a QR code without additional information, uncheck the 'Include credentials' box.
Each WiFi interface has a specially designed QR code that contains information about the SSID and password of the WiFi network. After pressing the button [[File:Networking_rutos_manual_wireless_qr_code_button.png]], a QR code appears with the network's SSID and password, which you can download locally by pressing the 'Download' button. If you only want a QR code without additional information, uncheck the 'Include credentials' box.
[[File:Networking_rutos_manual_wireless_qr_code.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_wireless_qr_code_v1.png|border|class=tlt-border]]
{{#switch:{{{series}}}|TAP100|TAP200=|#default= ==Relay Configuration==
{{#switch:{{{series}}}|TAP100|TAP200=|#default= ==Relay Configuration==
