TRB246 OPC UA Server: Difference between revisions
(Created page with "{{Template:Networking_rutos_manual_opcua_server <!------------------------DEVICE-----------------------> | name = TRB246 | series = TRB2M <!----------------------SEPARATORS-...") |
m (Vainius.l moved page Draft:TRB246 OPC UA Server to TRB246 OPC UA Server without leaving a redirect) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
<!----------------------SEPARATORS---------------------> | <!----------------------SEPARATORS---------------------> | ||
| digitalio = 0 <!----------------------Digital inputoutput.---------------------> | | digitalio = 0 <!----------------------Digital inputoutput.---------------------> | ||
| configurableio = | | configurableio = 1 <!----------------------Configurable inputoutput.---------------------> | ||
| relay = 0 | | relay = 0 | ||
| adc = | | adc = 1 | ||
| gps = | | gps = 1 | ||
| mobile = | | mobile = 1 | ||
}} | }} | ||
Latest revision as of 12:17, 23 January 2024
Main Page > TRB Gateways > TRB246 > TRB246 Manual > TRB246 WebUI > TRB246 Services section > TRB246 OPC UA ServerThe information in this page is updated in accordance with firmware version TRB2M_R_00.07.10.4.
Summary
OPC Unified Architecture (OPC UA) is a cross-platform, open-source, IEC62541 standard for data exchange from sensors to cloud applications developed by the OPC Foundation. The UA in OPC UA stands for “Unified Architecture” and refers to the latest specification of the standard. It differs from its predecessor in that it is platform-independent, moving away from COM/DCOM to purely binary TCP/IP or alternatively SOAP.
This manual page provides an overview of the OPC UA Server in TRB246 devices.
Note: OPC UA Server is additional software that can be installed from the System → Package Manager page.
Status
This section displays OPC UA Server status information.
OPC UA Server Configuration
The OPC UA Server Configuration section is used to enable the local OPC UA server.
| Field | Value | Description |
|---|---|---|
| Enable | off | on; default: off | Enables OPC UA server. |
| Port | integer [1..65535]; default: none | Service port. |
OPC UA Server variables
All RUTOS device variables are described in the table below:
Note: All the variables have these qualities in common:
- Namespace index is 1
- Node ID type is string
- Read-only
- Updated upon request
| ID | Type | Description |
|---|---|---|
| sys_uptime | UINT32 | System uptime in seconds. |
| sys_serial | String | Device serial number. |
| sys_devname | String | Device name. |
| sys_devcode | String | Device code. |
| sys_version | String | Firmware version. |
| sys_hostname | String | Hostname. |
| lan_mac | String | LAN MAC address. |
| lan_ip | String | IP address of LAN interface. |
| lan_mask | String | Subnet mask of LAN interface. |
| lan_gateway | String | Gateway IP address of LAN interface. |
| lan_dns | Array of String | IP addresses of LAN interface DNS servers. |
| rut_wan_ip | String | IP address if WAN is connected. |
| rut_wan_type | String | Values of WAN type. |
| io_dio_dir | Array of BOOL | Directions of digital input/output pins. 0=IN, 1=OUT. |
| io_dio | Array of BOOL | Values of digital input/output pins. |
| io_adc | Array of FLOAT | Values of Analog-to-Digital converters. |
| gps_fix_status | UINT32 | Whether a GPS connection has been acquired. |
| gps_timestamp | UINT64 | UTC timestamp. |
| gps_longitude | DOUBLE | Longitude. |
| gps_latitude | DOUBLE | Latitude. |
| gps_altitude | DOUBLE | Altitude. |
| gps_angle | DOUBLE | Angle. |
| gps_speed | DOUBLE | Speed. |
| gps_accuracy | DOUBLE | Accuracy. |
| gps_sat_count | UINT32 | Satellite count. |
| mob_modem_count | UINT32 | Modem count. |
| mob_modem_imei | Array of String | Modem IMEI. |
| mob_modem_serial | Array of String | Modem serial number. |
| mob_modem_mnf | Array of String | Modem manufacturer name. |
| mob_modem_model | Array of String | Modem model name. |
| mob_modem_fw | Array of String | Modem firmware version string. |
| mob_modem_temp | Array of FLOAT | Modem temperature. |
| mob_sim_count | Array of UINT32 | SIM count. |
| mob_sim | Array of UINT32 | Selected SIM. |
| mob_sim_state | Array of String | SIM state. |
| mob_sim_iccid | Array of String | SIM ICCID. |
| mob_rssi | Array of INT32 | RSSI. |
| mob_conn_type | Array of String | Data carrier type. |
| mob_conn_state | Array of String | Connection state. |
| mob_net_state | Array of String | Network link state. |
| mob_operator | Array of String | Operator name. |