|
|
(18 intermediate revisions by the same user not shown) |
Line 9: |
Line 9: |
| ---- | | ---- |
| <!--NEW_FW--> | | <!--NEW_FW--> |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.4/TRB2M/TRB2M_R_00.07.09.4_WEBUI.bin TRB2M_R_00.07.09.4]</span></b> | 2024.10.02===
| |
− | * <b>Improvements</b>
| |
− | ** <b>Services</b>
| |
− | *** NTP Client: changed default NTP servers
| |
− | * <b>Fix</b>
| |
− | ** <b>Services</b>
| |
− | *** NTP Client: fixed NTP server usage to work with next in line server if current server does not respond
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.3/TRB2M/TRB2M_R_00.07.09.3_WEBUI.bin TRB2M_R_00.07.09.3]</span></b> | 2024.09.27===
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Multi WAN: fixed ipsets not getting deleted correctly when Multi WAN gets restarted
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.1/TRB2M/TRB2M_R_00.07.09.1_WEBUI.bin TRB2M_R_00.07.09.1]</span></b> | 2024.09.13===
| |
− | * <b>Improvements</b>
| |
− | ** <b>Services</b>
| |
− | *** Python3: updated version to 3.11.7
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Mobile: fixed eSIM profile config generation
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9/TRB2M/TRB2M_R_00.07.09_WEBUI.bin TRB2M_R_00.07.09]</span></b> | 2024.09.03===
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** Firewall: added ability to configure NAT rule action
| |
− | *** Firewall: added additional TTL target for firewall rules
| |
− | *** Mobile: disabled GEA1/GEA2 and enabled GEA3/GEA4 ciphering algorithms for EC200, EC25 and SLM750 modems
| |
− | *** Mobile: added "datamobile.ag" APN for "Datamobile.ag" operator to APN database
| |
− | *** Mobile: added "m2m.ajrinternet.eu" APN for "Airinternet" operator to APN database
| |
− | *** Mobile: added "wbdata" APN for "Webbing" operator to APN database
| |
− | *** Mobile: added "inetd.vodafone.iot" APN for "Vodafone" operator to APN database
| |
− | *** Mobile: added "asm" APN for "ASM" operator to APN database
| |
− | *** Realtime Traffic: added historical traffic charts
| |
− | ** <b>Services</b>
| |
− | *** Events Reporting: added new firmware version notification event
| |
− | *** SNMP: added Multiwan data module
| |
− | ** <b>System</b>
| |
− | *** WebUI: added notifications menu
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Mobile: improved network bring up after operator scan
| |
− | *** Mobile: updated bands selection to include band number and frequency
| |
− | *** Mobile: improved SIM card notifications to get removed when SIM card state or active SIM changes
| |
− | *** Mobile: improved modem update notifications to show modem name
| |
− | *** Mobile: removed the USSD feature from the data-only modems
| |
− | *** Realtime Traffic: improved chart styles
| |
− | ** <b>Services</b>
| |
− | *** Data to Server: added warning messages about insecure certificates for http_certfile and mqtt_certfile options in API and WebUI
| |
− | *** DLMS: added SHA256 authentication
| |
− | *** DLMS: improved COSEM group enable validation
| |
− | *** GRE: reduced GRE keepalive packet buffer size
| |
− | *** Input/Output: the timeout for ADC value retrieval has been reduced from 20 seconds to 500 milliseconds. In the event of a timeout, the last cached valid value will now be returned
| |
− | *** IPsec: added support for route based tunnel
| |
− | *** L2TP: added field for custom options
| |
− | *** SMPP: added timeout option
| |
− | *** Web Filter: added hostname count message after successful file upload
| |
− | ** <b>System</b>
| |
− | *** Access Control: improved system user's access control rules logic
| |
− | *** Access Control: added option to disable password auth for the root user
| |
− | *** Administration: improved write/read access control options display to match meniu path style
| |
− | *** Backup: improved backup page by splitting it into backup and reset settings page
| |
− | *** Update Firmware: changed firmware update log to include firmware version
| |
− | *** WebUI: updated firmware and backup verification pages design
| |
− | *** WebUI: improved global alerts display
| |
− | *** WebUI: added confirmation prompt for disabling service in side widget
| |
− | *** Kernel: updated version to 5.15.162
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Devices: fixed configured VLAN 0 device cannot be selected in interface physical settings configuration
| |
− | *** Mobile: fixed data limit widget to show used data for inactive interface
| |
− | *** Mobile: fixed Bridge/Passthrough modes for routed networks
| |
− | *** Mobile: fixed incorrect date values when setting SMS limit
| |
− | *** Mobile: fixed SMS used data header counter
| |
− | *** Mobile: fixed the issue where the PUK event was not displayed when the SIM PIN was blocked
| |
− | *** Mobile: fixed uqmi start-network authentication issue
| |
− | *** Mobile: fixed modem info not being filled on devices with more than one modem
| |
− | *** Mobile: fixed mobile data limit to calculate correct used limits when using ipv4 and ipv6 simultaneously
| |
− | *** Mobile: fixed USSD over IMS error handling
| |
− | *** Mobile: fixed an issue where the interface could hang if the modem was busy
| |
− | *** Network: fixed Ethernet switch port state change tracking logic
| |
− | *** Network: fixed incorrect date values when setting data limit
| |
− | ** <b>Services</b>
| |
− | *** Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint to create Data to Server sections
| |
− | *** Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint so that it does not create sections in GET request
| |
− | *** Azure IoT Hub: fixed the deletion of Data to Server sections when an Azure IoT Hub section is deleted through the deprecated endpoint
| |
− | *** DLMS: fixed OBIS code validation
| |
− | *** GPS: fixed an issue where a firmware update with keep settings would remove existing hosts
| |
− | *** GPS: fixed NMEA forwarding when RMC/GGA were not synchronized when using same interval
| |
− | *** Input/Output: added I/O juggler reload when I/O pin direction is changed
| |
− | *** OPC UA Client: fixed TCL file upload
| |
− | *** OPC UA Server: fixed TCL file upload
| |
− | *** OPC UA Server: fixed configuration migration
| |
− | *** OpenVPN: fixed default firewall zone for tap interfaces
| |
− | *** SNMP: fixed negative GPS latitude display
| |
− | *** SNMP: fixed TELTONIKA-MIB wireless module crash
| |
− | *** SNMP: fixed mobile network state display
| |
− | *** SNMP: fixed default hssDwLimit, hssUpLimit, hssDwBandwidth and hssUpBandwidth values
| |
− | ** <b>System</b>
| |
− | *** API Core: fixed file deletion
| |
− | *** Boot: fixed Teltonika logo in httpd recovery page when using Firefox
| |
− | *** Package Restore: fixed automatic package re-installation after firmware upgrade
| |
− | *** Troubleshoot: fixed troubleshoot not including all the log files when log to flash is enabled
| |
− | *** User Settings: fixed page to show groups and users if the user has been granted access
| |
− | *** WebUI: fixed overview page to display active wireless (WLAN) clients
| |
− | * <b>CVE Patches</b>
| |
− | ** CVE-2021-32292
| |
− | ** CVE-2022-40617
| |
− | ** CVE-2023-49441
| |
− | ** CVE-2024-0397
| |
− | ** CVE-2024-3596
| |
− | ** CVE-2024-5535
| |
− | ** CVE-2024-8088
| |
− | ** CVE-2024-26669
| |
− | ** CVE-2024-26739
| |
− | ** CVE-2024-26740
| |
− | ** CVE-2024-36901
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.8.2/TRB2M/TRB2M_R_00.07.08.2_WEBUI.bin TRB2M_R_00.07.08.2]</span></b> | 2024.08.12===
| |
− | * <b>Fix</b>
| |
− | ** <b>System</b>
| |
− | *** Update Firmware: fixed inconsistent firmware download from FOTA
| |
− | ----
| |
− | ===<b>TRB2M_R_00.07.08.1</b> | 2024.08.06===
| |
− | <b>Note:</b> This firmware version was removed due to an issue with FOTA firmware download.
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Mobile: improved firmware downgrade validation for Quectel modules
| |
− | ** <b>Services</b>
| |
− | *** Zerotier: updated version to 1.14.0
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Mobile: fixed an issue where in some cases mobile network interfaces would not be brought down properly
| |
− | *** Mobile: fixed memory fault while allowlist and denied data roaming enabled
| |
− | *** Mobile: fixed illegal instruction fault on modem control services
| |
− | *** Network: fixed default route not being added for PPPoE connections
| |
− | ** <b>Services</b>
| |
− | *** Modbus TCP over Serial Gateway: fixed serial connection not working after reboot
| |
− | *** OPC UA Client: fixed connections not being closed after using testing functionality
| |
− | ** <b>System</b>
| |
− | *** WebUI: fixed SDK WebUI package compilation
| |
− | ----
| |
− | ===<b>TRB2M_R_00.07.08</b> | 2024.07.18===
| |
− | <b>Note:</b> This firmware version was removed due to an issue with FOTA firmware download.
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** DNS: added inherited server status to configuration page
| |
− | *** HTTPS DNS Proxy: added new HTTPS DNS Proxy package to package manager
| |
− | *** Mobile: added SIM card lock/unlock functionality in Mobile->Utilities page
| |
− | *** Mobile: added SIM card PIN change functionality in Mobile->Utilities page
| |
− | *** Mobile: added new Mobile->Limits page which shows information and allows to configure Data and SMS limits
| |
− | *** Mobile: added DFOTA support for RG520N modems
| |
− | *** Mobile: added nr-arfcn display to mobile status page
| |
− | *** Mobile: added dfota support for devices with RG520N-EB modem
| |
− | ** <b>Services</b>
| |
− | *** Data to Server: added 'Lua script' data input
| |
− | *** Input/Output: added ability to configure gpio debounce timer and changed default gpio debounce timer value from 200 ms to 10 ms
| |
− | *** IPsec: added initial XFRM support
| |
− | *** MQTT Modbus Gateway: added JSON message type format
| |
− | *** OpenVPN: added DCO support
| |
− | ** <b>System</b>
| |
− | *** API Core: added option to configure api session timeout
| |
− | *** Certificates: added "Let's encrypt" certificate generation
| |
− | *** PAM: added RADIUS external user support
| |
− | *** UI Core: added data analytics support
| |
− | *** Update Firmware: added warning message about device being temporarily unreachable on firmware update
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** DNS: separated field "DNS forwardings" into two: one for simple server forwarding other for domain-specific
| |
− | *** DNS: moved "DNS Forwardings", "Listen interfaces", "Exclude interfaces", "Local service only", options to advanced tab
| |
− | *** Firewall: improved protocol field in all firewall pages by making that "All" value would be mutually exclusive with any other value
| |
− | *** Mobile: improved IMS context initialization
| |
− | *** Mobile: updated SMS memory management for multipart SMS
| |
− | *** Mobile: added error message when attempting to enable the SIM switch without any criteria set
| |
− | *** Mobile: added informative message in SIM switch page when Data/SMS limit criteria are enabled but the limits themselves are not set up
| |
− | *** Mobile: moved operator list allowlist/blocklist selection to Network selection page
| |
− | *** Mobile: refactored Scanned operators modal, added repeat scan button
| |
− | *** Mobile: added ability to view previously scanned operators in Network selection and Operator lists pages
| |
− | *** Mobile: added ability to edit operator list name and initiate scans for operators in Operator lists page
| |
− | *** Mobile: updated operator code field list to include APNs from the APN database in Operator lists page
| |
− | *** Mobile: split Mobile->General page into three pages: General, Connection and Utilities pages
| |
− | *** Mobile: added mobile interface with highest priority APN configuration in Mobile->General page
| |
− | *** Mobile: added icons with hints which show SIM card, operator, data connection statuses in Mobile->General page
| |
− | *** Mobile: moved Mobile data limit section to a tab in WAN page
| |
− | *** Mobile: added informative message in WAN page to indicate whether the connection will be made using APN from APN database, empty or custom APN
| |
− | *** Mobile: improved logging of ping error messages
| |
− | *** Mobile: added 5G SA/NSA mode selection
| |
− | *** Mobile: improved modem updater to stop ping reboot service while update is in progress
| |
− | *** Mobile: improved the handling of denied messages upon SIM switch
| |
− | *** Mobile: added notification when a multi-IMSI SIM card is using Auto APN
| |
− | *** Mobile: added validation to not allow passthrough and bridge mode when one already exists
| |
− | *** Mobile: improved safeguards for modem services startup
| |
− | *** Mobile: improved modem update status display
| |
− | *** Mobile: added corrupted mobile statistics database restoration functionallity
| |
− | *** Mobile: improved setting of IPv4 and IPv6 types inside the modules
| |
− | *** Mobile: improved provider name parsing for SLM750 modem
| |
− | *** Multi WAN: improved interface status representation when using load balancing
| |
− | *** Network: added more options for "IPv6 assignment length" field
| |
− | *** VLAN: added ability to configure VLAN 0
| |
− | ** <b>Services</b>
| |
− | *** Azure IoT Hub: added DPS symmetric key attestation support
| |
− | *** Azure IoT Hub: added Direct Method support
| |
− | *** Azure IoT Hub: added Plug and Play integration
| |
− | *** Azure IoT Hub: added link to "Data to Server" page
| |
− | *** Data to Server: added support for multiple filters
| |
− | *** Data to Server: improved HTTP output hostname definition with automatic protocol specification in URL
| |
− | *** Data to Server: improved MQTT input connection handling
| |
− | *** DNP3 Client: added option to enable/disable service
| |
− | *** Dynamic DNS: added Lookup hostnames support
| |
− | *** GPS: added send empty feature, which sends zeroed location data after specified GNSS loss timeout
| |
− | *** GRE: increased Inbound and Outbound key limit to 4294967295
| |
− | *** Input/Output: added custom name support in I/O status page
| |
− | *** IPsec: added certificate warning message
| |
− | *** Mobile Utilities: added interface option to sms_utils cellular command
| |
− | *** Mobile Utilities: improved error log message
| |
− | *** Mobile Utilities: improved naming of I/O pins in initial I/O status rule
| |
− | *** Mobile Utilities: sms utilities authentication brute force prevention
| |
− | *** Modbus Server: added mobile last month and last week usage registers
| |
− | *** Modem Control: disabled canonical mode by default for partial mode. Now full/partial mode input from serial port works the same way
| |
− | *** Mosquitto: added large package size check for MQTT clients
| |
− | *** MQTT Modbus Gateway: improved mosquitto reconnect time and service will try to recover few times before exiting
| |
− | *** MQTT Publisher: improved MQTT connection handling
| |
− | *** OPC UA Client: added security modes
| |
− | *** OPC UA Server: added security modes
| |
− | *** OPC UA Server: added service status display
| |
− | *** OpenVPN: added support for decrypting private key when uploading a configuration file
| |
− | *** OpenVPN: improved instance status state
| |
− | *** OpenVPN: added options to specify an IP address pool for dynamic assignment to clients
| |
− | *** Over IP: added label to show how many servers a client is connected to
| |
− | *** Over IP: connect on data feature will not disconnect immediately after data transfer but wait for inactivity timeout
| |
− | *** Over IP: increased TLS handshake timeout to 10 seconds
| |
− | *** SMPP: added brute-force prevention
| |
− | *** SMPP: added TLS/SSL support
| |
− | *** SMS Utilities: added security warning in "Authorization method" configuration
| |
− | *** SNMP: changed interface module OID structure
| |
− | *** SNMP: improved User-based Security Model (USM) brute force attack prevention measures
| |
− | *** Stunnel: improved global instance settings dependencies
| |
− | *** emailrelay: updated version to 2.4.1
| |
− | *** OpenVPN: updated version to 2.6.9
| |
− | *** stunnel: updated version to 5.72
| |
− | ** <b>System</b>
| |
− | *** Access Control: added certificate key length warnings
| |
− | *** Access Control: adjusted access control when all pages are blocked
| |
− | *** Access Control: added certificate file download for CLI to work on all browsers
| |
− | *** API Core: implemented functionality to include warning messages for vulnerable certificates
| |
− | *** Boot: improved modem startup reliability
| |
− | *** Package Manager: added multi package actions
| |
− | *** Package Manager: added status filter
| |
− | *** Package Manager: moved package upload action to main page
| |
− | *** Package Manager: added links to installed packages pages
| |
− | *** Package Manager: refactored "Packages" page
| |
− | *** Package Manager: updated opkg repository link to use https
| |
− | *** RutOS: improved GPL example page to align with new software architecture
| |
− | *** Troubleshoot: refactored Modem debug section to display responses in single field, added clear button to remove received responses
| |
− | *** Troubleshoot: added support for multiple syslog servers
| |
− | *** UI Core: added additional message with IP address to loading screen for scenarios when redirect to different IP address happens
| |
− | *** UI Core: added toast message hiding when text is too long
| |
− | *** Update Firmware: added 'Firmware version' data in screen after firmware upload
| |
− | *** WebUI: added functionality to cancel loading screen if it takes 30 or more seconds
| |
− | *** WebUI: removed all ubus method calls from webui
| |
− | *** WebUI: improved language caching
| |
− | *** WebUI: added password generator for first login modal
| |
− | *** WebUI: added sticky position to side menu
| |
− | *** WebUI: added default password hint to login error message
| |
− | *** WebUI: added warning messages for low-security certificates
| |
− | *** Kernel: updated version to 5.15.159
| |
− | *** libexpat: updated version to 2.6.2
| |
− | *** SSL/TLS: updated version to 3.0.14
| |
− | *** vue: updated version to 3.4
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Devices: fixed missing API devices status endpoint permission
| |
− | *** DHCP: fixed "DHCP option" allow empty input value
| |
− | *** DHCP: fixed IPv4 leases being not correctly shown when NTP synchronizes time
| |
− | *** DHCP: fixed DHCP error that occurred after changing the subnet of the LAN IP address in the setup wizard
| |
− | *** Dynamic routes: fixed duplicated external routes cards
| |
− | *** Firewall: fixed firewall zone validation when adding interfaces
| |
− | *** Mobile: fixed low signal reconnect being available on modems where it is not supported
| |
− | *** Mobile: fixed gsmctl -E output to return only json values
| |
− | *** Mobile: fixed Carrier Aggregation signal strength info
| |
− | *** Mobile: fixed wrong mobile data limit used data format for sms messages
| |
− | *** Mobile: fixed duplicate data connection event reporting
| |
− | *** Mobile: fixed an issue where low signal notifications were displayed without a SIM card
| |
− | *** Mobile: fixed modem serial number acquisition after modem reboot
| |
− | *** Mobile: fixed an issue when 4G-only network type selection may have resulted in a slower connection to the operator
| |
− | *** Mobile: fixed issue where USSD responses were returned in HEX format instead of text format for EC200A module
| |
− | *** Mobile: fixed issue where DHCP filter was not set correctly for RG501Q
| |
− | *** Mobile: fixed an issue where the wrong IP address was used after a DFOTA upgrade
| |
− | *** Network: fixed overriding MAC address for interfaces that are bridged
| |
− | *** Network: fixed not getting IP address when switching LAN to WAN
| |
− | *** Realtime Traffic: fixed mobile usage by week day translation by device language
| |
− | *** SQM: fixed missing PPP mobile device selection in SQM configuration
| |
− | ** <b>Services</b>
| |
− | *** BACnet: fixed incorrect BACnet IP port used for sending responses
| |
− | *** BGP: fixed route map sequence going out of range
| |
− | *** BGP: fixed listen range field allowing multiple entries
| |
− | *** DLMS: fixed DLMS test response format
| |
− | *** DLMS: fixed COSEM group validation
| |
− | *** DLMS: fixed API POST error for /dlms/devices/config endpoint
| |
− | *** DLMS: fixed serial connection not working after reboot
| |
− | *** DNP3 Client: fixed to allow reading objects past 255 index
| |
− | *** DNP3 Client: fixed incorrect hints
| |
− | *** DNP3 Outstation: fixed serial outstation starting issues
| |
− | *** GPS: fixed GPS start constellations issue
| |
− | *** GPS: fixed an issue where NMEA sentences were parsed incorrectly at midnight, resulting in a 24-hour time discrepancy
| |
− | *** GPS: fixed gpsctl datetime parameter
| |
− | *** GPS: fixed issue where DPO would not get disabled if GPS is started without DPO
| |
− | *** GPS: fixed AVL TAVL rule signal value issue
| |
− | *** GPS: fixed default AVL rule issue where I/O would be ignored by default
| |
− | *** GPS: fixed BeiDou and QZSS seperation in PQGSV sentences
| |
− | *** GPS: fixed NMEA sentences reading in NMEA collecting
| |
− | *** I/O Juggler: fixed improper dout action config handling
| |
− | *** I/O Juggler: updated profile change action
| |
− | *** Input/Output: allow unselecting all Post/Get access methods
| |
− | *** IPsec: fixed connectivity issues when using WAN failover
| |
− | *** IPsec: fixed the instance status when the local firewall option is disabled
| |
− | *** Ledman: fixed issue when after some time network type LED starts blinking
| |
− | *** Modbus Client: fixed test request option validation
| |
− | *** Modbus Client: fixed alarm output action display values
| |
− | *** Modbus Client: fixed incorrect period hint
| |
− | *** Modbus Server: fixed APN register not clearing APN
| |
− | *** Modbus Server: fixed 148 and 164 modbus registers
| |
− | *** Modbus Server: fixed incorrect hints
| |
− | *** Modem Control: fixed API POST request validation
| |
− | *** NTRIP: fixed NTRIP NMEA generation timestamp and coordinates errors
| |
− | *** NTRIP: fixed configuration reading with several instances added
| |
− | *** OPC UA Server: fixed not starting while modem is down
| |
− | *** OpenVPN: fixed displaying imported files from device
| |
− | *** OpenVPN: fixed the private key decryption for cases when a password is used
| |
− | *** OpenVPN: fixed data cipher migration
| |
− | *** Over IP: fixed issue where serial device does not recover after modem reboot
| |
− | *** Over IP: fixed connect on data initiating TCP connection after few data transfers
| |
− | *** Overview: fixed issue when devices without WiFi send additional request without data
| |
− | *** SMPP: fixed username bypass problem
| |
− | *** SMPP: fixed password validation
| |
− | *** SMS Gateway: fixed SMS to Email recipient formatting according to RFC5322
| |
− | *** SNMP: fixed GSM mSignal OID value type
| |
− | *** SNMP: fixed GSM module memory leaks
| |
− | *** SSTP: fixed functionality when the default route option is not enabled
| |
− | *** Web Filter: fixed whitelist not working for some hosts when using IPv6
| |
− | ** <b>System</b>
| |
− | *** Administration: fixed repeated validation on cleared inputs and added validation when new password matches the old one
| |
− | *** API Core: fixed API method validation during upload action
| |
− | *** API Core: fixed error messages for POST method
| |
− | *** API Core: fixed option list validation
| |
− | *** Boot: fixed factory settings restore (firstboot) not deleting hidden files
| |
− | *** Events Log: fixed refresh button in event log table
| |
− | *** IP Block: fixed adding MAC addresses back to whitelist when unblocking all of them
| |
− | *** Recipients: made phone number field required
| |
− | *** Setup Wizard: fixed lan ip step not changing ip address
| |
− | *** Troubleshoot: fixed system log and kernel log buttons to be enabled with read only rights
| |
− | *** Update Firmware: fixed misleading "Firmware version" status of "N/A" to "FOTA service is disabled" when FOTA is disabled
| |
− | *** Update Firmware: fixed issue when infinite spinner appears after updating device firmware from server without having internet connection
| |
− | * <b>CVE Patches</b>
| |
− | ** Patched CVE-2023-52425
| |
− | ** Patched CVE-2023-52530
| |
− | ** Patched CVE-2024-25629
| |
− | ** Patched CVE-2024-28757
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.3/TRB2M/TRB2M_R_00.07.07.3_WEBUI.bin TRB2M_R_00.07.07.3]</span></b> | 2024.06.25===
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** WebUI: fixed port advertisement change
| |
− | ** <b>System</b>
| |
− | *** FOTA: fixed config when upgrading from older firmware with keep settings
| |
− | * <b>CVE Patches</b>
| |
− | ** CVE-2024-31950
| |
− | ** CVE-2024-31951
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.2/TRB2M/TRB2M_R_00.07.07.2_WEBUI.bin TRB2M_R_00.07.07.2]</span></b> | 2024.06.12===
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Zerotier: added backup WAN interface blacklisting if WAN failover is enabled
| |
− | *** Mobile: improved communication stability with eSIM
| |
− | ** <b>Services</b>
| |
− | *** SNMP: added bruteforce attack prevention when using SNMP v3 user
| |
− | *** L2TP: improved reconnect attempt logic
| |
− | ** <b>System</b>
| |
− | *** SSH: removed weak SSH algorithms
| |
− | *** Telnet: moved to Package Manager
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** BGP: fixed instance migration issues
| |
− | *** Mobile: fixed forced APN configuration
| |
− | ** <b>Services</b>
| |
− | *** DMVPN: fixed duplicate NHRP map entries creation
| |
− | *** OpenVPN: added fixes for the insecure tls-cert-profile option usage
| |
− | ** <b>System</b>
| |
− | *** IP Block: fixed blocking of UDP traffic
| |
− | *** Uboot: fixed firmware recovery update via uboot on Windows
| |
− | * <b>CVE Patches</b>
| |
− | ** CVE-2024-31948
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.10/TRB2M/TRB2M_R_00.07.06.10_WEBUI.bin TRB2M_R_00.07.06.10]</span></b> | 2024.04.04===
| |
− | ----
| |
− | * Global changelog for <b>R_00.07.06.10</b> - [[Global RUTOS changelog#R_00.07.06.10|LINK]]
| |
− | ===<b>TRB2M_R_00.07.06.8</b> | 2024.03.25===
| |
− | ----
| |
− | * Firmware <b>R_00.07.06.8</b> was removed due to an issue with inefficient memory allocation for LED control.
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.6/TRB2M/TRB2M_R_00.07.06.6_WEBUI.bin TRB2M_R_00.07.06.6]</span></b> | 2024.03.04===
| |
− | ----
| |
− | * Global changelog for <b>R_00.07.06.6</b> - [[Global RUTOS changelog#R_00.07.06.6|LINK]]
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.5/TRB2M/TRB2M_R_00.07.06.5_WEBUI.bin TRB2M_R_00.07.06.5]</span></b> | 2024.02.21===
| |
− | ----
| |
− | * Global changelog for <b>R_00.07.06.5</b> - [[Global RUTOS changelog#R_00.07.06.5|LINK]]
| |
| ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.3/TRB2M/TRB2M_R_00.07.06.3_WEBUI.bin TRB2M_R_00.07.06.3]</span></b> | 2024.01.17=== | | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.3/TRB2M/TRB2M_R_00.07.06.3_WEBUI.bin TRB2M_R_00.07.06.3]</span></b> | 2024.01.17=== |
| ---- | | ---- |
| * <b>New</b> | | * <b>New</b> |
| ** Initial firmware release | | ** Initial firmware release |