Template:Networking tsw100 first start safety information: Difference between revisions

From Teltonika Networks Wiki
 
(5 intermediate revisions by 3 users not shown)
Line 8: Line 8:
|-
|-
|Input voltage range*
|Input voltage range*
|7 - 58 V
|7 - 57 VDC
|-
|-
|Max power consumption
|Max power consumption
Line 15: Line 15:
|Max PoE power budget at PSE**
|Max PoE power budget at PSE**
|120 W
|120 W
|-
|Max Ethernet cable length
|100 m
|-
|-
! colspan="2" |Bundled accessories specifications***
! colspan="2" |Bundled accessories specifications***
|-
|-
|Power adapter
|Power adapter
|Input: 1.8 A @ 100-240 VAC, Output: 50 VDC, 1.3 VDC, 4 pin plug  
|Input: 1.8 A @ 100-240 VAC, Output: 48 VDC, 1.3 A, 4-pin plug  
|}
|}
<span class="asterisk">*</span> PoE operates properly only when connected power supply outputs 44 V or higher voltage.  
<span class="asterisk">*</span> PoE operates properly only when connected power supply outputs 44 V or higher voltage.  
Line 28: Line 25:
<span class="asterisk">**</span> Default Teltonika provided power supply only allows 60 W PoE power budget at PSE, to reach maximum 120 W at PSE, a >130 W power supply must be used.
<span class="asterisk">**</span> Default Teltonika provided power supply only allows 60 W PoE power budget at PSE, to reach maximum 120 W at PSE, a >130 W power supply must be used.


<span class="asterisk">***</span> Order code dependant.
<span class="asterisk">***</span> Order code dependant.
 
=== PoE standards ===
 
This device uses PoE alternative B.
 
===The difference between PoE alternative A and alternative B===
 
'''Alternative A:'''
 
802.3af and 802.3at Alternative A connection. The power sourcing equipment applies a positive voltage to pins 1-2 and a negative voltage to pins 3-6.
{{Template: Alternative_A_Table}}
 
'''Alternative B:'''
 
802.3af and 802.3at Alternative B connection. The power sourcing equipment applies a positive voltage to pins 4-5 and a negative voltage to pins 7-8.
{{Template: Alternative_B_Table}}
 
 
'''日本国内専用です'''
 
本製品を電気通信事業者(移動体通信事業者、固定通信事業者、インターネットプロバイダなど)の電気通信回線(または公衆無線LAN)に直接接続することはできません。電気通信事業者の公衆電気通信回線設備に接続する場合は、必ず日本の「電気通信事業法」で認められた機器(ルーター、ゲートウェイ、モデムなど)を介して接続してください。
 


[[File:Qsg rut950 manual.PNG|frameless|50x50px]]This sign on the package means that is necessary to read the User's Manual before you start using the device  
[[File:Qsg rut950 manual.PNG|frameless|50x50px]]This sign on the package means that is necessary to read the User's Manual before you start using the device  


[[File:Qsg rut950 recycle.PNG|frameless|65x65px]]This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste
[[File:Qsg rut950 recycle.PNG|frameless|65x65px]]This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste

Latest revision as of 15:26, 12 February 2024

Safety information

TSW100 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.

Technical specifications
Input voltage range* 7 - 57 VDC
Max power consumption <9 W
Max PoE power budget at PSE** 120 W
Bundled accessories specifications***
Power adapter Input: 1.8 A @ 100-240 VAC, Output: 48 VDC, 1.3 A, 4-pin plug

* PoE operates properly only when connected power supply outputs 44 V or higher voltage.

** Default Teltonika provided power supply only allows 60 W PoE power budget at PSE, to reach maximum 120 W at PSE, a >130 W power supply must be used.

*** Order code dependant.

PoE standards

This device uses PoE alternative B.

The difference between PoE alternative A and alternative B

Alternative A:

802.3af and 802.3at Alternative A connection. The power sourcing equipment applies a positive voltage to pins 1-2 and a negative voltage to pins 3-6.

802.3af/at Alternative A:
Pins at switch T568A Color T568B Color 10/100 Alternative A, mixed DC & data 1000 (1 gigabit) Alternative A, DC & bi-data
Pin 1
white/green stripe

white/orange stripe
Rx + DC + TxRx A + DC +
Pin 2
green solid

orange solid
Rx − DC + TxRx A − DC +
Pin 3
white/orange stripe

white/green stripe
Tx + DC − TxRx B + DC −
Pin 4
blue solid

blue solid
Unused Unused TxRx C +
Pin 5
white/blue stripe

white/blue stripe
Unused Unused TxRx C -
Pin 6
orange solid

green solid
Tx − DC − TxRx B − DC −
Pin 7
white/brown stripe

white/brown stripe
Unused Unused TxRx D +
Pin 8
brown solid

brown solid
Unused Unused TxRx D -

Alternative B:

802.3af and 802.3at Alternative B connection. The power sourcing equipment applies a positive voltage to pins 4-5 and a negative voltage to pins 7-8.

802.3af/at Alternative B:
Pins at switch T568A Color T568B Color 10/100 Alternative B, DC on spares 1000 (1 gigabit) Alternative B, DC & bi-data
Pin 1
white/green stripe

white/orange stripe
Rx + TxRx A +
Pin 2
green solid

orange solid
Rx − TxRx A −
Pin 3
white/orange stripe

white/green stripe
Tx + TxRx B +
Pin 4
blue solid

blue solid
DC + TxRx C + DC +
Pin 5
white/blue stripe

white/blue stripe
DC + TxRx C - DC +
Pin 6
orange solid

green solid
Tx − TxRx B −
Pin 7
white/brown stripe

white/brown stripe
DC − TxRx D + DC −
Pin 8
brown solid

brown solid
DC − TxRx D - DC −


日本国内専用です

本製品を電気通信事業者(移動体通信事業者、固定通信事業者、インターネットプロバイダなど)の電気通信回線(または公衆無線LAN)に直接接続することはできません。電気通信事業者の公衆電気通信回線設備に接続する場合は、必ず日本の「電気通信事業法」で認められた機器(ルーター、ゲートウェイ、モデムなど)を介して接続してください。


This sign on the package means that is necessary to read the User's Manual before you start using the device

This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste