Difference between revisions of "RUT142 LEDs"

From Teltonika Networks Wiki
(Created page with "{{Template: Networking_rutos_manual_leds <!------------------------DEVICE-----------------------> | name = RUT142 | series = RUT14X <!----------------------SEPARAT...")
 
Line 5: Line 5:
 
<!----------------------SEPARATORS--------------------->
 
<!----------------------SEPARATORS--------------------->
 
| 2g          = 0  <!-- 1 has 2G; 0 doesn't have 2G -->
 
| 2g          = 0  <!-- 1 has 2G; 0 doesn't have 2G -->
| 5g          = 1 <!-- 1 has 5G; 0 doesn't have 5G -->
+
| 5g          = 0 <!-- 1 has 5G; 0 doesn't have 5G -->
 
| eth        = 1  <!-- 1 has ETH; 0 doesn't have ETH -->
 
| eth        = 1  <!-- 1 has ETH; 0 doesn't have ETH -->
| eth_leds    = 2 <!-- 1 for green; 2 for green & orange -->
+
| eth_leds    = 1 <!-- 1 for green; 2 for green & orange -->
| mobile      = 1 <!-- 1 has mobile; 0 doesn't have mobile -->
+
| mobile      = 0 <!-- 1 has mobile; 0 doesn't have mobile -->
| mobile_leds = 3 <!-- number of mobile signal strength type LEDs -->
+
| mobile_leds = 0 <!-- number of mobile signal strength type LEDs -->
 
| power_leds  = 1  <!-- number of power LEDs -->
 
| power_leds  = 1  <!-- number of power LEDs -->
| wan        = 1 <!-- 1 has WAN type LEDs; 0 doesn't have WAN type LEDs -->
+
| wan        = 0 <!-- 1 has WAN type LEDs; 0 doesn't have WAN type LEDs -->
| wifi        = 1 <!-- 1 has WiFi band LEDs; 0 doesn't have WiFi band LEDs -->
+
| wifi        = 0 <!-- 1 has WiFi band LEDs; 0 doesn't have WiFi band LEDs -->
 
}}
 
}}

Revision as of 12:02, 5 April 2024

Main Page > RUT Routers > RUT142 > RUT142 Manual > RUT142 LEDs

This page contains information the different types of LEDs and their behaviour on a RUT142 device.

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power connector.

Networking rut142 manual leds power led.png

It indicates whether the device is powered on or not.

State Description
LED turned on Device is powered on.
LED turned off Device is not powered on.

Ethernet port LEDs

The Ethernet port LEDs are located on the device's front panel, under each respective Ethernet port.

Networking rut142 manual leds ethernet leds.png

State Description
LED on Operating as a 10/100 Mbps connection.
LED off No link established.
LED blinking Connection established and there is activity on this port (data being transferred).