RUT900 SNMP: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
 
(6 intermediate revisions by 4 users not shown)
Line 1: Line 1:
==Summary==
{{Template: Networking_rutos_manual_snmp_rut2_rut9
 
<!------------------------DEVICE----------------------->
'''Simple Network Management Protocol (SNMP)''' is a popular protocol for network management. It is used for collecting information from, and configuring, network devices. This section is an overview of the '''SNMP''' function in RUT routers.
| name    = RUT900
 
| series  = RUT9
==MIB file downloads==
<!----------------------SEPARATORS--------------------->
 
| mobile = 1
<table class="nd-othertables">
| gps     = 0
    <tr>
| hotspot = 1
        <th style="width: 150px">FIELD ROUTER</th>
}}
      <th style="width: 150px">MIB FILE</th>
    </tr>
    <tr>
      <td>RUT2XX</td>
      <td>'''[[Media:TLT-MIB_RUT2XX.txt|TLT-MIB_RUT2XX]]'''</td>
    </tr>
    <tr>
      <td>RUT9XX</td>
      <td>'''[[Media:TLT-MIB_RUT9XX.txt|TLT-MIB_RUT9XX]]'''</td>
    </tr>
</table>
 
==SNMP Configuration==
 
[[Image:Services snmp configuration v2.png]]
 
<table class="nd-mantable">
    <tr>
        <th>field name</th>
      <th>value</th>
      <th>description</th>
    </tr>
    <tr>
      <td>MIB file</td>
      <td>-</td>
      <td>Downloads Teltonika's MIB file</td>
    </tr>
    <tr>
      <td>Enable SNMP service</td>
      <td>yes | no; Default: '''no'''</td>
      <td>Toggles SNMP ON or OFF</td>
    </tr>
    <tr>
    <td>Enable remote access</td>
        <td>yes | no; Default: '''no'''</td>
        <td>Opens a port in firewall so that the SNMP service may be reached remotely from WAN</td>
    </tr>
    <tr>
    <td>Port</td>
        <td>integer [0..65535]; Default: '''161'''</td>
        <td>SNMP service port</td>
    </tr>
    <tr>
      <td>Community</td>
      <td>Public | Pirvate | Custom; Default: '''Public'''</td>
      <td>SNMP Community is an ID that allows access to a router's SNMP data</td>
    </tr>
    <tr>
      <td>Location</td>
      <td>string; Default: '''Location'''</td>
      <td>Trap named sysLocation</td>
    </tr>
    <tr>
    <td>Contact</td>
        <td>string; Default: '''[email protected]'''</td>
        <td>Trap named sysContact</td>
    </tr>
    <tr>
    <td>Name</td>
        <td>string; Default: '''Name'''</td>
        <td>Trap named sysName</td>
    </tr>
    <tr>
    <td>SNMP version</td>
        <td>v1/v2 | v1/v2/v3 | v3; Default: '''v1/v2'''</td>
        <td>Specifies which SNMP version is to be used</td>
    </tr>
    <tr>
    <td><span style="color: red;">v1/v2/v3</span>/<span style="color: purple;">v3:</span> Username</td>
        <td>string; Default: '''username'''</td>
        <td>Set username to access SNMP</td>
    </tr>
    <tr>
    <td><span style="color: red;">v1/v2/v3</span>/<span style="color: purple;">v3:</span> Authentication type</td>
        <td>SHA | MD5; Default: '''SHA'''</td>
        <td>Set authentication passphrase to generate key for SNMPv3</td>
    </tr>
    <tr>
    <td><span style="color: red;">v1/v2/v3</span>/<span style="color: purple;">v3:</span> Authentication passphrase</td>
        <td>string; Default: '''passphrase'''</td>
        <td>Set authentication passphrase to generate key for SNMPv3</td>
    </tr>
    <tr>
    <td><span style="color: red;">v1/v2/v3</span>/<span style="color: purple;">v3:</span> Encryption type</td>
        <td>AES | DES; Default: '''AES'''</td><td>Set encryption type to use with SNMPv3</td>
    </tr>
    <tr>
    <td><span style="color: red;">v1/v2/v3</span>/<span style="color: purple;">v3:</span> Encryption passphrase </td>
        <td>string; Default: '''passphrase'''</td>
        <td>Set encryption passphrase to generate key for SNMPv3</td>
    </tr>
</table>
 
<b>Additional notes</b>:
<ul>
    <li>Some configuration fields become available only when certain other parameters are selected. Different color codes are used for different parameters:
        <ul>
            <li>Red for <span style="color: red;">SNMP version: v1/v2/v3</span></li>
            <li>Purple for <span style="color: purple;">SNMP version: v3</span></li>
        </ul>
    </li>
    <li>After changing any of the parameters, don't forget to click the <b>Save</b> button located at the bottom-right side of the page.</li>
</ul>
 
==Trap Settings==
 
[[Image:Services snmp trap.PNG]]
 
<table class="nd-mantable">
    <tr>
        <th>field name</th>
      <th>value</th>
      <th>description</th>
    </tr>
    <tr>
      <td>SNMP trap</td>
      <td>yes | no; Default: '''no'''</td>
      <td>Toggles SNMP trap ON or OFF</td>
    </tr>
    <tr>
      <td>Host/IP</td>
      <td>host | ip; Default: " "</td>
      <td>Host to transfer SNMP traffic to</td>
    </tr>
    <tr>
    <td>Port</td>
        <td>integer [0..65535]; Default: '''162'''</td>
        <td>Port for trap's host</td>
    </tr>
    <tr>
    <td>Community</td>
        <td>Public | Pirvate; Default: '''Public'''</td>
        <td>SNMP Community is an ID that allows access to a router's SNMP data</td>
    </tr>
</table>
 
==SNMP Variables list==
 
<table class="nd-mantable">
    <tr>
        <th style="width: 250px">NAME</th>
      <th style="width: 250px">OID</th>
      <th style="width: 579px">DESCRIPTION</th>
    </tr>
    <tr>
      <td>ModemImei.0</td>
      <td>.1.3.6.1.4.1.48690.1.1.0</td>
      <td>Modem IMEI</td>
    </tr>
    <tr>
      <td>ModemModel.0</td>
      <td>.1.3.6.1.4.1.48690.1.2.0</td>
      <td>Modem model</td>
    </tr>
    <tr>
    <td>ModemManufacturer.0</td>
        <td>.1.3.6.1.4.1.48690.1.3.0</td>
        <td>Modem manufacturer</td>
    </tr>
    <tr>
    <td>ModemRevision.0</td>
        <td>.1.3.6.1.4.1.48690.1.4.0</td>
        <td>Modem revision</td>
    </tr>
    <tr>
      <td>ModemSerial.0</td>
      <td>.1.3.6.1.4.1.48690.1.5.0</td>
      <td>Modem serial number</td>
    </tr>
    <tr>
      <td>Imsi.0</td>
      <td>.1.3.6.1.4.1.48690.1.6.0</td>
      <td>Modem IMSI</td>
    </tr>
    <tr>
    <td>RouterName.0</td>
        <td>.1.3.6.1.4.1.48690.1.7.0</td>
        <td>Router's name</td>
    </tr>
    <tr>
    <td>ProductCode.0</td>
        <td>.1.3.6.1.4.1.48690.1.8.0</td>
        <td>Router's Product code</td>
    </tr>
    <tr>
      <td>BatchNumber.0</td>
      <td>.1.3.6.1.4.1.48690.1.9.0</td>
      <td>Router's batch number</td>
    </tr>
    <tr>
      <td>HardwareRevision.0</td>
      <td>.1.3.6.1.4.1.48690.1.10.0</td>
      <td>Router's Hardware Revision number</td>
    </tr>
    <tr>
    <td>SimState.0</td>
        <td>.1.3.6.1.4.1.48690.2.1.0</td>
        <td>SIM card status</td>
    </tr>
    <tr>
    <td>PinState.0</td>
        <td>.1.3.6.1.4.1.48690.2.2.0</td>
        <td>PIN status</td>
    </tr>
    <tr>
      <td>NetState.0</td>
      <td>.1.3.6.1.4.1.48690.2.3.0</td>
      <td>Mobile network registration status</td>
    </tr>
    <tr>
      <td>Signal.0</td>
      <td>.1.3.6.1.4.1.48690.2.4.0</td>
      <td>Signal strength level</td>
    </tr>
    <tr>
    <td>Operator.0</td>
        <td>.1.3.6.1.4.1.48690.2.5.0</td>
        <td>Operator currently in use</td>
    </tr>
    <tr>
    <td>OperatorNumber.0</td>
        <td>.1.3.6.1.4.1.48690.2.6.0</td>
        <td>Operator number (MCC+MNC)</td>
    </tr>
    <tr>
      <td>ConnectionState.0</td>
      <td>.1.3.6.1.4.1.48690.2.7.0</td>
      <td>Data session connection state</td>
    </tr>
    <tr>
      <td>ConnectionType.0</td>
      <td>.1.3.6.1.4.1.48690.2.8.0</td>
      <td>Data session connection type</td>
    </tr>
    <tr>
    <td>Temperature.0</td>
        <td>.1.3.6.1.4.1.48690.2.9.0</td>
        <td>Modem's temperature in 0.1 degrees Celsius</td>
    </tr>
    <tr>
    <td>ReceivedToday.0</td>
        <td>.1.3.6.1.4.1.48690.2.10.0</td>
        <td>Tee current day's RX packet count</td>
    </tr>
    <tr>
      <td>SentToday.0</td>
      <td>.1.3.6.1.4.1.48690.2.11.0</td>
      <td>The current day's TX packet count</td>
    </tr>
    <tr>
      <td>ReceivedYesterday.0</td>
      <td>.1.3.6.1.4.1.48690.2.12.0</td>
      <td>Yesterday's RX packet count</td>
    </tr>
    <tr>
    <td>SentYesterday.0</td>
        <td>.1.3.6.1.4.1.48690.2.13.0</td>
        <td>Yesterday's TX packet count</td>
    </tr>
    <tr>
    <td>FirmwareVersion.0</td>
        <td>.1.3.6.1.4.1.48690.2.14.0</td>
        <td>Router's Firmware version</td>
    </tr>
    <tr>
      <td>SimSlot.0</td>
      <td>.1.3.6.1.4.1.48690.2.15.0</td>
      <td>SIM slot currently in use</td>
    </tr>
    <tr>
      <td>RouterUptime.0</td>
      <td>.1.3.6.1.4.1.48690.2.16.0</td>
      <td>Router up-time in seconds</td>
    </tr>
    <tr>
    <td>ConnectionUptime.0</td>
        <td>.1.3.6.1.4.1.48690.2.17.0</td>
        <td>Mobile connection up-time in seconds</td>
    </tr>
    <tr>
    <td>MobileIP.0</td>
        <td>.1.3.6.1.4.1.48690.2.18.0</td>
        <td>IP address of the mobile interface</td>
    </tr>
    <tr>
      <td>Sent.0</td>
      <td>.1.3.6.1.4.1.48690.2.19.0</td>
      <td>The amount of data sent through the mobile interface</td>
     </tr>
    <tr>
      <td>Received.0</td>
      <td>.1.3.6.1.4.1.48690.2.20.0</td>
      <td>The amount of data received through the mobile interface</td>
    </tr>
    <tr>
    <td>CellID.0</td>
        <td>.1.3.6.1.4.1.48690.2.21.0</td>
        <td>ID of the current mobile operator's cell </td>
    </tr>
    <tr>
    <td>SINR.0</td>
        <td>.1.3.6.1.4.1.48690.2.22.0</td>
        <td>SINR value in dB</td>
    </tr>
    <tr>
      <td>RSRP.0</td>
      <td>.1.3.6.1.4.1.48690.2.23.0</td>
      <td>RSRP value in dBm</td>
    </tr>
    <tr>
      <td>RSRQ.0</td>
      <td>.1.3.6.1.4.1.48690.2.24.0</td>
      <td>RSRQ value in dB</td>
    </tr>
    <tr>
    <td>hotSpotId.0</td>
        <td>.1.3.6.1.4.1.48690.3.4.1.0</td>
        <td>Hotspot ID</td>
    </tr>
    <tr>
    <td>hotSpotSsid.0</td>
        <td>.1.3.6.1.4.1.48690.3.4.2.0</td>
        <td>Hotspot SSID</td>
    </tr>
    <tr>
      <td>hotSpotEnableState.0</td>
      <td>.1.3.6.1.4.1.48690.3.4.3.0</td>
      <td>Hotspot status (enabled or disabled)</td>
    </tr>
    <tr>
      <td>hotSpotIP.0</td>
      <td>.1.3.6.1.4.1.48690.3.4.4.0</td>
      <td>Hotspot interface IP address</td>
    </tr>
    <tr>
    <td>hotSpotDownloadBandWidth.0</td>
        <td>.1.3.6.1.4.1.48690.3.4.5.0</td>
        <td>Hotspot download bandwidth</td>
    </tr>
    <tr>
    <td>hotSpotUploadBandWidth.0</td>
        <td>.1.3.6.1.4.1.48690.3.4.6.0</td>
        <td>Hotspot upload bandwidth</td>
    </tr>
    <tr>
    <td>hotSpotUsers.0</td>
        <td>.1.3.6.1.4.1.48690.3.4.7.0</td>
        <td>Hotspot users list</td>
    </tr>
    <tr>
    <td>hotSpotUsersPass.0</td>
        <td>.1.3.6.1.4.1.48690.3.4.8.0 </td>
        <td>Hotspot users password list </td>
    </tr>
    <tr>
      <td>hotSpotUsersActive.0</td>
      <td>.1.3.6.1.4.1.48690.3.4.9.0</td>
      <td>List of active Hotspot users</td>
    </tr>
    <tr>
      <td>hotSpotUsersMac.0</td>
      <td>.1.3.6.1.4.1.48690.3.4.10.0</td>
      <td>Hotspot users MAC address list</td>
    </tr>
    <tr>
    <td>hotSpotUsersIp.0</td>
        <td>.1.3.6.1.4.1.48690.3.4.11.0</td>
        <td>Hotspot users IP address list</td>
    </tr>
    <tr>
    <td>hotSpotUsersStartTime.0</td>
        <td>.1.3.6.1.4.1.48690.3.4.12.0</td>
        <td>Hotspot users log in time list</td>
    </tr>
    <tr>
      <td>hotSpotUsersUseTime.0</td>
      <td>.1.3.6.1.4.1.48690.3.4.13.0</td>
      <td>Hotspot users log in up-time list</td>
    </tr>
    <tr>
      <td>hotSpotUsersDownload</td>
      <td>.0.1.3.6.1.4.1.48690.3.4.14.0</td>
      <td>Hotspot users downloaded data count</td>
    </tr>
    <tr>
    <td>hotSpotUsersUpload.0</td>
        <td>.1.3.6.1.4.1.48690.3.4.15.0</td>
        <td>Hotspot users uploaded data count</td>
    </tr>
    <tr>
    <td>hotSpotEndTime.0</td>
        <td>.1.3.6.1.4.1.48690.3.4.16.0</td>
        <td>Hotspot</td>
    </tr>
    <tr>
      <td>DigitalInput.0</td>
      <td>.1.3.6.1.4.1.48690.5.1.0</td>
      <td>Digital input state</td>
    </tr>
    <tr>
      <td>DigitalIsolatedInput.0</td>
      <td>.1.3.6.1.4.1.48690.5.2.0</td>
      <td>Digital isolated input state</td>
    </tr>
    <tr>
    <td>AnalogInput.0</td>
        <td>.1.3.6.1.4.1.48690.5.3.0</td>
        <td>Analog input state</td>
    </tr>
    <tr>
    <td>DigitalOCOutput.0</td>
        <td>.1.3.6.1.4.1.48690.5.4.0</td>
        <td>Digital OC output state</td>
    </tr>
    <tr>
      <td>DigitalRelayOutput.0</td>
      <td>.1.3.6.1.4.1.48690.5.5.0</td>
      <td>Digital Relay output state</td>
    </tr>
    <tr>
      <td>AnalogInputCalc.0</td>
      <td>.1.3.6.1.4.1.48690.5.6.0</td>
      <td>Analog input value</td>
    </tr>
    <tr>
    <td>Longtitude.0</td>
        <td>.1.3.6.1.4.1.48690.6.1.0</td>
        <td>GPS Longitude value</td>
    </tr>
    <tr>
    <td>Latitude.0</td>
        <td>.1.3.6.1.4.1.48690.6.2.0</td>
        <td>GPS Latitude value</td>
    </tr>
    <tr>
      <td>Accuracy.0</td>
      <td>.1.3.6.1.4.1.48690.6.3.0</td>
      <td>GPS coordinate accuracy</td>
    </tr>
    <tr>
      <td>Datetime.0</td>
      <td>.1.3.6.1.4.1.48690.6.4.0</td>
      <td>GPS coordinate fix time</td>
    </tr>
    <tr>
    <td>NumSatellites.0</td>
        <td>.1.3.6.1.4.1.48690.6.5.0</td>
        <td>Number of GPS satelites</td>
    </tr>
</table>
 
[[Category:RUT900 WebUI]]

Latest revision as of 10:15, 9 April 2024

Main Page > EOL Products > RUT900 > RUT900 Manual > RUT900 WebUI > RUT900 Services section > RUT900 SNMP

The information in this page is updated in accordance with firmware version .
Note: click here for the old style WebUI (FW version RUT9XX_R_00.06.09.5 and earlier) user manual page.

Summary

Simple Network Management Protocol (SNMP) is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in RUT900 devices.

Note: SNMP is additional software that can be installed from the System → Package Manager page.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

SNMP settings

The SNMP settings page is used to configure SNMP accessibility and general SNMP information for your device.

SNMP agent settings

Field Value Description
Enable SNMP service off | on; default: off Run SNMP service on system's startup.
Enable remote access off | on; default: off Open port in firewall so that SNMP service may be reached from WAN.
IP type IPv4 | IPv6 | IPv4v6; default: IPv4 IP type used by SNMP.
Port integer [0..65535]; default: 161 SNMP service's port.
SNMP v1 Mode off | on; default: on Enable/disable SNMP v1 Mode.
SNMP v2c Mode off | on; default: on Enable/disable SNMP v2c Mode.
SNMP v3 Mode off | on; default: off Enable/disable SNMP v3 Mode.

SNMP System Summary

The SNMP System Summary section contains general information about SNMP on this device. You can also download this device's MIB file from this section.

Field Value Description
MIB file -(interactive button) Downloads the device's MIB file.
System OID 1.3.6.1.4.1.48690 OID or Object Identifier, is an identifier used to name and point to an object in the MIB hierarchy.
Location string; default: location Trap named sysLocation.
Contact string; default: [email protected] Trap named sysContact.
Name string; default: name Trap named sysName.

SNMP v3 users

The SNMP v3 users page is used to create and manage users, who can be authenticated using SNMP v3. To configure an SNMP user, you must first create it:

  1. Enter a custom name for the new user in the 'Name' field.
  2. Click the 'Add' button.
  3. Click the 'Edit' button next to the newly created user.

The SNMP user configuration window should look similar to this:

Note: this table has coloring scheme to indicate which fields can be seen with different configuration.

Field Value Description
Enable off | on; default: off Turns this SNMP user on or off.
Username string; default: none Set username to access SNMP.
Security level No authentication, no privacy | Authentication, no privacy | Authentication and privacy; default: No authentication, no privacy A security level is an authentication strategy that is set up for the user.

No authentication, no privacy - authenticates with a username. Authentication - provides MD5 or SHA algorithms for authentication.

Privacy - Provides DES or AES encryption.
Authentication, no privacy | Authentication and privacy: Authentication type SHA | MD5; default: SHA Set authentication type to use with SNMP v3.
Authentication, no privacy | Authentication and privacy: Authentication passphrase string; default: none Set authentication passpharse to generate key for SNMP v3.
Authentication and privacy: Privacy type DES | AES; default: DES Set privacy type to use with SNMP v3.
Authentication and privacy: Privacy passphrase string; default: none Set privacy passpharse to generate key for SNMP v3.
Access Mode Read-Only | Read-Write; default: Read-Only The access mode specifies the access the hosts in the community are allowed with respect to retrieving and modifying the MIB variables from a specific SNMP agent.
MIB subtree string; default: none Leave empty to access full MIB tree.

Communities

The SNMP Community section is used to manage access rights. You can edit an SNMP community by clicking the 'Edit' button next to it:

This will redirect you to the community's configuration page.

Field Value Description
Community name string; default: none Name of the community.
IP Address ip; default: none IP address of the community.
IP Mask ip; default: none Netmask for IP of the community.
Access Mode Read-Only | Read-Write; default: Read-Only Access mode for current community.

SNMPv6 community configuration page:

Field Value Description
Community name string; default: public Name of the community.
Source ip6 | domain name; default: default Source of the community.
Access Mode Read-Only | Read-Write; default: Read-Only Access mode for current community.

Trap Settings

SNMP Traps are used to send alert messages to a central collector, the “SNMP manager” when an important event happens. A benefit of using Traps for reporting alarms is that they trigger instantaneously, rather than waiting for a status request from the manager.

Trap settings page is divided in two sections - Trap service settings and Trap rules. Trap service settings lets you manage hosts which will get configured alert messages, Trap rules lets you manage rules which when triggered will send alerts.

Trap Service Settings

The Trap Service Settings is used to manage hosts which will be alerted when an SNMP trap is triggered. The host list is empty by default thus, to begin configuration you must first create at least one host.

Click the 'Add' button at the bottom-right side of the table to create a new host.

The newly added Host configuration should look similar to this:

Field Value Description
Host/IP url | ip; default: none Hostname or IP address to transfer SNMP traffic to.
Port integer [0..65535]; default: 162 Trap host's port number.
Community string; default: Public Name of the community to which the trap belongs.
Delete - (interactive button) Deletes the host next to the button.
off/on slider off | on; default: off Turns the host on or off. SNMP traffic is only sent to enabled hosts.

Trap Rules

SNMP Trap Rules are alerts that trigger when certain user-specified events occur. When the trigger event happens, the trap will notify known SNMP hosts.

You can create a new trap rule by clicking the 'Add' button.

You should be redirected to the rule's configuration page which should look something like this:

Above is an example of what rule configuration window looks like. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean.

To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.


Signal strength

Field Value Description
Enable off | on; default: off Enable or disable this rule.
Action Signal strength trap Rule will be triggered if signal strength falls below specified number.
Signal strength integer [-130..0]; default: none GSM signal's strength value in dBm, e.g. -85


Connection type

Field Value Description
Enable off | on; default: off Enable or disable this rule.
Action Connection type trap Rule will be triggered when connection type will change.


Events log

Event Event subtype Description
Config change All | Specific config change; default: all Informs on changes to the device's configuration.
Reboot All | From Web UI | From ping reboot | From reboot scheduler | From button| From SMS; default: All Informs on if the device was rebooted.
Startup Device startup completed Informs on when the device is fully booted.
Mobile data All | Connected | Disconnected; default All Informs on changes to the state of the device's mobile connection.
New DHCP client All | Connected from LAN; default All Informs on new DHCP lease give outs.
Reboot All | From button | From Input/Output | From Ping Reboot | From Reboot Scheduler | From WebUI | From SMS; default: All Informs after device reboot occurrences.
Signal strength All | - 121 dBm - 113 dBm | - 113 dBm - 98 dBm | - 98 dBm - 93 dBm | - 93 dBm - 75 dBm | - 75 dBm - 60 dBm | - 60 dBm - 50 dBm; default: All Informs on signal strength changes.
SMS SMS received Informs on received SMS messages.
SSH All | Successful authentication | Unsuccessful authentication; default: All Informs on successful or unsuccessful SSH login attempts.
WebUI ALL | Successful authentication | Unsuccessful authentication; default: All Informs on successful or unsuccessful HTTP/HTTPS login attempts.


SNMP variables list

Name OID Description
Device
serial .1.3.6.1.4.1.48690.1.1.0 Device serial number
routerName.0 .1.3.6.1.4.1.48690.1.2.0 Device name
productCode .1.3.6.1.4.1.48690.1.3.0 Device product (ordering) code
batchNumber .1.3.6.1.4.1.48690.1.4.0 Device batch number
hardwareRevision .1.3.6.1.4.1.48690.1.5.0 Device hardware revision
fwVersion .1.3.6.1.4.1.48690.1.6.0 Device RutOS firmware version
deviceUptime .1.3.6.1.4.1.48690.1.7.0 Device uptime
Mobile
modemNum .1.3.6.1.4.1.48690.2.1.0 The number of modems (regardless of their current state) present on this system
mIndex .1.3.6.1.4.1.48690.2.2.1.1.1 Available modem indexes; used to index OIDs between when the device has multiple modems
mDescr .1.3.6.1.4.1.48690.2.2.1.2.1 Modem description
mImei .1.3.6.1.4.1.48690.2.2.1.3.1 Modem IMEI
mModel .1.3.6.1.4.1.48690.2.2.1.4.1 Modem model
mManufacturer .1.3.6.1.4.1.48690.2.2.1.5.1 Modem manufacturer
mRevision .1.3.6.1.4.1.48690.2.2.1.6.1 Modem firmware version
mSerial .1.3.6.1.4.1.48690.2.2.1.7.1 Modem serial number
mIMSI .1.3.6.1.4.1.48690.2.2.1.8.1 Modem IMSI number
mSimState .1.3.6.1.4.1.48690.2.2.1.9.1 SIM card status
mPinState .1.3.6.1.4.1.48690.2.2.1.10.1 PIN status
mNetState .1.3.6.1.4.1.48690.2.2.1.11.1 Mobile network registration status
mSignal .1.3.6.1.4.1.48690.2.2.1.12.1 Signal strength level
mOperator .1.3.6.1.4.1.48690.2.2.1.13.1 Current mobile network operator
mOperatorNumber .1.3.6.1.4.1.48690.2.2.1.14.1 Mobile operator number (MCC+MNC)
mConnectionState .1.3.6.1.4.1.48690.2.2.1.15.1 Mobile data connection state
mConnectionType .1.3.6.1.4.1.48690.2.2.1.16.1 Mobile data connection type
mTemperature .1.3.6.1.4.1.48690.2.2.1.17.1 Modem's temperature in 0.1 degrees Celsius
mCellID .1.3.6.1.4.1.48690.2.2.1.18.1 Cell (Base transceiver station) ID
mSINR .1.3.6.1.4.1.48690.2.2.1.19.1 SINR value in dB
mRSRP .1.3.6.1.4.1.48690.2.2.1.20.1 RSRP value in dBm
mRSRQ .1.3.6.1.4.1.48690.2.2.1.21.1 RSRQ value in dB
mSent .1.3.6.1.4.1.48690.2.2.1.22.1 Total bytes sent
mReceived .1.3.6.1.4.1.48690.2.2.1.23.1 Total bytes received
mIP .1.3.6.1.4.1.48690.2.2.1.24.1 Modem IP address(es)
mSentToday .1.3.6.1.4.1.48690.2.2.1.25.1 Bytes sent today
mReceivedToday .1.3.6.1.4.1.48690.2.2.1.26.1 Bytes received today
mICCID .1.3.6.1.4.1.48690.2.2.1.27.1 SIM ICCID
mSentCurrentWeek .1.3.6.1.4.1.48690.2.2.1.28.1 Bytes sent this week
mReceivedCurrentWeek .1.3.6.1.4.1.48690.2.2.1.29.1 Bytes received this week
mSentCurrentMonth .1.3.6.1.4.1.48690.2.2.1.30.1 Bytes sent this month
mReceivedCurrentMonth .1.3.6.1.4.1.48690.2.2.1.31.1 Bytes received this month
connectionUptime .1.3.6.1.4.1.48690.2.3.0.1 Mobile connection uptime
Input/Output notifications
Hotspot Notifications
clientConnectedNotification .1.3.6.1.4.1.48690.4.3.1 Hotspot client connected trap
clientDisconnectedNotification .1.3.6.1.4.1.48690.4.3.2 Hotspot client disconnected trap
Hotspot
hsState .1.3.6.1.4.1.48690.5.1.0 Current Hotspot state
hsIP .1.3.6.1.4.1.48690.5.2.0 Hotspot IP address
hsNet .1.3.6.1.4.1.48690.5.3.0 WiFi interface ID
hsAuth .1.3.6.1.4.1.48690.5.4.0 Hotspot authentication type
hsSessionCount .1.3.6.1.4.1.48690.5.5.0 Hotspot current active session (connected user) count
Hotspot Sessions
hssIndex .1.3.6.1.4.1.48690.5.6.1.1.1 Connected Hotspot user indexes
hssMAC .1.3.6.1.4.1.48690.5.6.1.2.1 Hotspot user MAC addresses
hssIP .1.3.6.1.4.1.48690.5.6.1.3.1 Hotspot user local IP addresses
hssID .1.3.6.1.4.1.48690.5.6.1.4.1 Hotspot user session unique IDs
hssUsername .1.3.6.1.4.1.48690.5.6.1.5.1 Hotspot connected user usernames
hssState .1.3.6.1.4.1.48690.5.6.1.6.1 Hotspot user session states
hssDwLimit .1.3.6.1.4.1.48690.5.6.1.7.1 Hotspot user download limits
hssUpLimit .1.3.6.1.4.1.48690.5.6.1.8.1 Hotspot user upload limits
hssTimeLimit .1.3.6.1.4.1.48690.5.6.1.9.1 Hotspot user session time limit
hssIdleTimeout .1.3.6.1.4.1.48690.5.6.1.10.1 Hotspot user maximum idle timeout values
hssDwBandwidth .1.3.6.1.4.1.48690.5.6.1.11.1 Hotspot user maximum download speed
hssUpBandwidth .1.3.6.1.4.1.48690.5.6.1.12.1 Hotspot user maximum upload speed
hssURL .1.3.6.1.4.1.48690.5.6.1.13.1 Hotspot URL
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=RUT900_SNMP&oldid=122969"