RUT955 Dynamic DNS: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Template: Networking_rut9xx_manual_dynamic_dns
{{Template: Networking_rutos_manual_dynamic_dns_rut2_rut9
<!-------------------------DEVICE DETAILS--------------------->
<!------------------------DEVICE----------------------->
| name                           = RUT955
| name   = RUT955
| series                         = RUT9
| series = RUT9
<!----------------------SEPARATORS--------------------->
| network = wan
}}
}}

Latest revision as of 11:07, 9 April 2024

Main Page > EOL Products > RUT955 > RUT955 Manual > RUT955 WebUI > RUT955 Services section > RUT955 Dynamic DNS

The information in this page is updated in accordance with firmware version RUT9_R_00.07.06.16.
Note: click here for the old style WebUI (FW version RUT9XX_R_00.06.09.5 and earlier) user manual page.

Summary

Dynamic DNS (DDNS or DynDNS) is a method of automatically updating a name server in the Domain Name System (DNS). This is most often utilized when the end user has a dynamic IP address and wants to bind it to a static hostname.

The device is compatible with many different third party DNS services that provide the possibility to create a custom hostname and bind it to an IP address. The DDNS service periodically updates the IP address information of the hostname, making sure that the device remains reachable via the same hostname even in cases when its IP address has changed.

This chapter is an overview of the Dynamic DNS section for RUT955 devices.

Note: Dynamic DNS is additional software that can be installed from the System → Package Manager page.

Dynamic DNS Overview

By default, an unconfigured DDNS instance will be present in the Dynamic DNS Overview page (the figure below is an example of this). You can create more DDNS instances by entering a name and clicking the "Add" button or you can edit the existing instance since it is not operational by default.

Editing a DDNS instance

To configure a DDNS instance, click the "Edit" button located next to it.

The figure below is an example of the edit page of the default DDNS instance called "MyDDNS" (already present in the device by default) and the table below provides information on the configuration fields contained in that page:

Field Value Description
Enabled off | on; Default: off Turns the DDNS instance on or off.
Lookup hostname host; Default: yourhost.example.com Fully qualified domain name (FQDN) of your defined host. This is required to verify what the hostname's current IP address at DNS is (using nslookup/host command).
DDNS service provider third party DNS service (chosen from list*) | -- custom --; Default: dyn.com Third party DNS service provider.
Domain host; Default: yourhost.example.com Hostname that will be linked with the device IP address.
Username string; Default: your_username User name required to login to the third party DNS service; used to periodically login to your DNS service account and make necessary updates.
Password string; Default: your_password Password required to login to the third party DNS service; used to periodically login to your DNS service account and make necessary updates.
IP address source Custom | Public | Private | Script; Default: Custom Defines the source to read the system's IPv4-Address from, that will be sent to the DNS provider. For example, if your device has a Private IP (i.e., 10.140.56.57) on its WAN interface, then you can send this exact IP to DDNS server by selecting Private.
Network network interface; Default: lan Specifies which interface's IP address should be bound to the hostname
Check Interval integer [5..3600]; Default: 10
integer [300..3600]*
integer [1..3600]**
Frequency at which the device will check whether it's IP address has changed.
The minimal amount of time that can be specified is 5 minutes or 300 seconds.
*If selected interval is Seconds.
**If selected interval is Hours.
Force Interval integer [5..3600]; Default: 10
integer [1..3600]*
Frequency at which IP update requests are sent to the DNS provider.
The minimal amount of time that can be specified is 5 minutes and not less than Check Interval.
*If selected interval is Hours or Days.


Azure IoT Hub BGP Daemon Cloud of Things Cumulocity Data to Server Dynamic DNS
DMVPN DNP3 EIGRP Daemon Hotspot Hotspot Themes Language - German
MODBUS TCP Master MODBUS TCP Slave MODBUS MQTT Gateway MQTT NHRP Daemon NTPD
OSPF Daemon QoS Relay Configuration Relay Configuration RIP Daemon SMPP
SNMP Speedtest SQM SSHFS SSTP Stunnel
TCPdump ThingWorx Tinc VPN TR-069 Traffic Logging UDP Broadcast Relay
UPNP VRRP Wake on LAN Wifi Scanner ZeroTier

cloudflare.com

Note: To use subdomains with Cloudfare services, you must use the @ symbol.

service_name	cloudflare.com-v4
domain		[Your domain, here: example.com]
username	Bearer
password	[Your API token]

To use subdomains (CNAME or A records), use the format below when filling your credentials:

domain		{subdomain}@[zone]

Examples:

If the hostname is “sample.example.com”, the “domain” field would be “[email protected]”
If the hostname is “dev1.sample.example.com”, the “domain” field would be “[email protected]”
If using Cloudflare's “Subdomain Support”, your zone may already be “foo.example.com”, so if the DDNS hostname is “bar.foo.example.com” the domain field would be “[email protected]

See also