Difference between revisions of "Template:Networking rutos manual dns"
Line 68: | Line 68: | ||
</table> | </table> | ||
− | + | ==Advanced Settings== | |
The <b>Advanced Settings</b> section is used to set up some of the more specific DNS parameters. Refer to the table below for information on each configuration field. | The <b>Advanced Settings</b> section is used to set up some of the more specific DNS parameters. Refer to the table below for information on each configuration field. | ||
Line 101: | Line 101: | ||
</tr> | </tr> | ||
</table> | </table> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
[[Category:{{{name}}} Network section]] | [[Category:{{{name}}} Network section]] |
Revision as of 11:28, 16 April 2024
The information in this page is updated in accordance with firmware version .
Summary
The DNS page is used to to set up how the device utilizes its own and other DNS servers.
This manual page provides an overview of the DNS windows in {{{name}}} devices.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.
General Settings
The General Settings section is used to set up the main DNS parameters. Refer to the table below for information on each configuration field.
Field | Value | Description |
---|---|---|
Log queries | off | on; default: off | Write received DNS requests to syslog. |
DNS forwardings | Hostname (domain name) | IP address (ip); default: none | List of DNS servers to forward requests to. See the dnsmasq -S option man page for syntax details. |
Addresses | Hostname (domain name) | IP address (ip); default: none | List of IP addresses for queried domains. See the dnsmasq -A option man page for syntax details. |
Rebind protection | off | on; default: on | Discards upstream RFC1918 responses. When enabled, the device will not resolve domain names for internal hosts. |
Local Service Only | off | on; default: off | Limit DNS service to subnets interfaces on which we are serving DNS. |
Listen Interfaces | network interface(s); default: none | Limit DHCP and DNS requests listening to these interfaces, and loopback. Leave empty to listen on all interfaces. |
Exclude Interfaces | network interface(s); default: none | Prevent DHCP and DNS requests listening on these interfaces. Leave empty to listen on all interfaces. |
Advanced Settings
The Advanced Settings section is used to set up some of the more specific DNS parameters. Refer to the table below for information on each configuration field.
Field | Value | Description |
---|---|---|
Filter private | off | on; default: on | Do not forward reverse lookups for local networks. |
Localise queries | off | on; default: on | Localise hostname depending on the requesting subnet if multiple IPs are available. |
Additional servers file | text file; default: none | Uploads an additional DNS servers file. This file may contain lines like 'server=/domain/1.2.3.4' or 'server=1.2.3.4' for domain-specific or full upstream DNS servers. |
Size of DNS query cache | integer [0..10000]; default: none | Number of cached DNS entries (max is 10000, 0 is no caching). |
[[Category:{{{name}}} Network section]]