RUT260 Firmware Downloads: Difference between revisions

From Teltonika Networks Wiki
No edit summary
m (Text replacement - "*** Mobile: fixed PIN code set after modem restart *** Mobile: fixed cases where 5G NSA network type was shown incorrectly *** Mobile: fixed an issue where using SIM change command on one SIM slot modems would reset connection" to "*** Mobile: fixed PIN code set after modem restart *** Mobile: fixed an issue where using SIM change command on one SIM slot modems would reset connection")
(11 intermediate revisions by the same user not shown)
Line 6: Line 6:


==Changelog==
==Changelog==
{{Template:Global_changelog_disclaimer}}
<!--NEW_FW-->
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.1/RUT2M/RUT2M_R_00.07.07.1_WEBUI.bin RUT2M_R_00.07.07.1]</span></b> | 2024.05.03===
----
----
<!--NEW_FW-->
* <b>Improvements</b>
** <b>Network</b>
*** Mobile: improved connection establish time for uqmi protocol
** <b>System</b>
*** WebUI: improved first login password change logic
*** Certificates: updated Root CA certificates
* <b>Fix</b>
** <b>Network</b>
*** Mobile: fixed denied roaming flag set
* <b>CVE Patches</b>
** CVE-2024-2397
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7/RUT2M/RUT2M_R_00.07.07_WEBUI.bin RUT2M_R_00.07.07]</span></b> | 2024.04.16===
* <b>New</b>
** <b>Network</b>
*** WebUI: added ESM/EMM message notifications
*** WebUI: added internet status tracking configuration and overview widget
*** LAN: added a new IPv6 LAN status page
*** Static Leases: added a new IPv6 Static Leases page
*** WebUI: added custom domain name resolve option in “DNS” configuration page
*** Auto APN: added “uno.au-net.ne.jp” APN for “KDDI” operator
*** Auto APN: added 'eprivate010.tisparkle.com' APN for “Sparkle” operator
*** QoS: added mobile interface select option
*** Failover: added additional connection flush options
*** Wireless: added auto-reconnect disable functionality
*** Wireless: added ability to use PKCS#12 certificates for EAP-TLS authentication
*** VRF: added initial Virtual Routing and Forwarding support
** <b>Services</b>
*** Post/Get: added I/O invert support
*** DLMS Client: added persistent TCP connections
*** Events Reporting: added unexpected shutdown event
*** Modbus Client: added 64bit data types
*** IPerf3: added iPerf3 to Package Manager
*** DNP3 Outstation: added I/O objects
*** TR-069: added PCI, LAC, TAC, EARFCN and Neighbour cells data to Device.MobileInfo node
*** Hotspot: added domain and subdomain options for external landing page
** <b>System</b>
*** WebUI: added the ability to generate random passwords for password input fields
*** WebUI: added reset to “Factory defaults” option
*** System: changed firmware certificate verification tool
*** IP Block: added time-based login attempt blocking
*** WebUI: added firmware update notification support
*** PAM: added the ability to set port for TACACS+
*** Logging: added multiple remote syslog servers support
* <b>Improvements</b>
** <b>Network</b>
*** Static Leases: added possibility to use MAC with wildcard
*** WebUI: added ability to disable modem update notifications
*** WebUI: added additional field for warning threshold to allow entering value as percentage in Mobile Data Limit section
*** Mobile: improved mobile services stability when SIM card is lost during SMS sending
*** Mobile: updated bridge/passthrough mode logic to flush ARP and add static ARP entry if MAC is specified
*** Mobile: improved SIM switch logging and protection on failure to acquire data
*** WebUI: added partial data loading to APN database page
*** Mobile: improved SMS sending timeouts during network issues
*** Mobile: improved connection handling when data limit is reached
*** Mobile: added metric to default gateway when using passthrough mode
*** WebUI: added validation for 2 same APNs
*** WebUI: updated Band selection field to show duplex modes in Mobile General page
*** Mobile: improved connection establishment time on device boot up
*** Topology: changed network devices scanning application
*** WebUI: improved design of Status - LAN page
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** DHCP: removed default disabled server configuration for WAN interface
*** WebUI: simplified data entry of DNS forwardings by separating hostname and IP address fields
*** BGP: added Virtual Routing and Forwarding (VRF) support
*** BGP: added multiple BGP instance support
*** WebUI: adjusted responsive design breakpoints
*** Dnsmasq: updated dnsmasq to version 2.89
*** WebUI: added an information icon and disabled delete button for wireless instance when it is associated with a hotspot interface
*** Wireless: improved hidden AP handling when showing scan results
** <b>Services</b>
*** Wireguard: added option to bind tunnel to a specific interface
*** OPC UA Client: added limits (10 servers, 20 groups, 50 nodes per server, 50 values per group)
*** DLMS Client: increased maximum count of connection sections to 30
*** DLMS Client: added short name referencing
*** SNMP: set strict default community access when IPv6 address is used
*** SNMP: improved sysName OID to set device's hostname
*** OpenVPN: added the bridge option for selecting the network device to be bridged with
*** OpenVPN: added possibility to create more than one TAP client
*** Auto Reply: added available SMS message parameters to "Message text" input
*** Modbus Client: allow using diacritics in SMS alarms
*** Hotspot: moved MAC blocking option from Access Control to Hotspot page
*** WebUI: added MAC authentication support when using RADIUS authentication mode
*** WebUI: moved licenses to footer
*** SSTP: updated package version to 1.0.19
*** Mosquitto: updated package version to 2.0.17
** <b>System</b>
*** WebUI: added more strict password requirements for restoring backup
*** SMTP: added option to either not verify SMTP server or upload SMTP server's CA file to verify authenticity
*** WebUI: Added the ability to choose the ROOT CA when using certificates from the device
*** WebUI: unified time format to ISO8601 across the entire WebUI
*** WebUI: added ability to choose imported certificate and key as 'Server certificate' and 'Server key' in 'Access Control'
*** WebUI: added 'Hosts' and 'IP Addresses' options for 'Simple' certificate generation and certificate signing
*** WebUI: changed firmware update option to server as a default option
*** GPL: added offline package preparation command for GPL builds
*** Speedtest: added multiple connections support to improve accuracy
*** Kernel: updated to version 5.15.149
*** Libcap: updated package version to 2.69
* <b>Fix</b>
** <b>Network</b>
*** Topology: fixed showing interfaces with assigned VLAN
*** WebUI: fixed static routing creation for GRE instance
*** Network: fixed DHCPv4 relay mode enabling
***
*** Mobile: fixed PIN code set after modem restart
*** Mobile: fixed an issue where using SIM change command on one SIM slot modems would reset connection
*** Mobile: fixed an issue where message storage would not be checked correctly
*** Mobile: fixed temperature value sometimes returning 0
*** Mobile: fixed issue where RSSI value was displayed as 0 when using 2G/3G network types
*** Failover: fixed Failover missing active rules when using multiple source and destination IP addresses
*** Failover: fixed an issue where failover would not function correctly while using a mobile interface
*** WebUI: fixed network and failover interface metric sorting synchronization issue
*** WebUI: fixed failover rule policy save issue with newly added WAN interface
*** Interfaces: fixed failover value for new WAN being taken from WAN that was just deleted
*** Wireless: fixed Wifi Scanner not saving scanned WiFi SSIDs
*** Wireless: fixed missing CCMP-256 and GCMP-256 cipher types in scan results
*** Wireless: fixed missing GCMP-256 cipher when using WPA3-EAP encryption in Client mode
*** Wireless: fixed skipped MAC address value for interface in Client mode
*** Wireless: fixed scanning issue when connected via the same network
*** Wireless: fixed mesh functionality
*** Wireless: fixed missing signal strength value on Client interfaces
*** Wireless: fixed Client interface taking excessive time to connect after boot
*** Wireless: fixed missing EAP authentication in Client mode
*** Wireless: fixed connected wireless clients being shown duplicated
*** WebUI: fixed mesh nodes not being shown in Status->Wireless->Interfaces page
*** WebUI: fixed proposed configuration settings when connecting to a mesh point network
*** MultiAP: fixed client not switching to another AP if incorrect password was provided
** <b>Services</b>
*** Modbus Client: allow using negative floating point values in requests
*** Azure IoT Hub: fixed Data to Server minor WebUI dependency bugs
*** Azure IoT Hub: fixed 'contentType' telemetry message parameter
*** Data to Server: fixed DLMS data formating
*** Data to Server: fixed Network link state data display
*** DLMS Client: fixed segfault while reading profile generic COSEM object
*** DLMS Client: fixed profile generic entries reading
*** DLMS Client: fixed application memory allocation issues
*** SSTP: fixed route adding when default route is enabled
*** SNMP: fixed VLAN OID naming
*** OpenVPN: added fixes for instance status tracking functionality
*** OpenVPN: resolved uptime counting issues
*** PPTP: fixed PPTP instance deletion problem
*** PPTP: fixed problem related with routes when failover is enabled
*** Hotspot: fixed password validation for locally created users and signed-up users
*** Hotspot: fixed session invalidation after deleting registered user
*** Hotspot: fixed SMS OTP password reuse
*** Hotspot: fixed firewall rule creation
*** Modbus Client: fixed issue where service freezes when SMS alarm is sent
*** WebUI: fixed data loading error in Input/Output > Post/Get page
*** UPnP: updated package version to 2.3.4
*** ** <b>System</b>
*** NTP Client: fixed "Count of time synchronizations" execution when synchronization to mobile operator is chosen
*** Package Manager: fixed spinner message when restarting network after package upload or download
*** Package Manager: fixed supported devices check when installing a package from server
*** WebUI: fixed language install from uploaded package after upgrade with keep settings
*** WebUI: fixed an issue when a user was not logged out after changing profiles
*** Telnet: fixed segmentation fault during concurrent connections
*** CLI: fixed enter key issue on mobile chromium based browsers
*** System Users: fixed SSH session close after deleting user or disabling SSH access
*** Profiles: fixed profile migration with installed packages
*** WebUI: fixed Hotspot log page table search functionality
*** Speedtest: fix missing download speed on some servers
*** PAM: updated libpam to version 1.6.0
* <b>CVE Patches</b>
*** CVE-2022-4603
*** CVE-2022-23308
*** CVE-2022-45061
*** CVE-2023-0466
*** CVE-2023-6129
*** CVE-2023-7042
*** CVE-2023-24329
*** CVE-2023-27043
*** CVE-2023-42366
*** CVE-2023-46218
*** CVE-2023-46219
*** CVE-2023-46752
*** CVE-2023-46753
*** CVE-2023-48795
*** CVE-2024-25062
*** CVE-2024-27913
*** CVE-2024-22365
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.10/RUT2M/RUT2M_R_00.07.06.10_WEBUI.bin RUT2M_R_00.07.06.10]</span></b> | 2024.04.04===
----
* Global changelog for <b>R_00.07.06.10</b> - [[Global RUTOS changelog#R_00.07.06.10|LINK]]
===<b>RUT2M_R_00.07.06.8</b> | 2024.03.25===
----
* Firmware <b>R_00.07.06.8</b> was removed due to an issue with inefficient memory allocation for LED control.
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.6/RUT2M/RUT2M_R_00.07.06.6_WEBUI.bin RUT2M_R_00.07.06.6]</span></b> | 2024.03.04===
----
* Global changelog for <b>R_00.07.06.6</b> - [[Global RUTOS changelog#R_00.07.06.6|LINK]]
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.5/RUT2M/RUT2M_R_00.07.06.5_WEBUI.bin RUT2M_R_00.07.06.5]</span></b> | 2024.02.24===
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.5/RUT2M/RUT2M_R_00.07.06.5_WEBUI.bin RUT2M_R_00.07.06.5]</span></b> | 2024.02.24===
----
----

Revision as of 08:48, 6 May 2024

Main Page > RUT Routers > RUT260 > RUT260 Firmware Downloads

This page contains firmware files for RUT260 devices. Look to the table below or the changelog to find download links.

To upgrade firmware using WebUI, follow the instructions in RUT260 Firmware.

RUT260

File Type Release date Size MD5 Changelog
RUT2M_R_00.07.10_WEBUI.bin Latest FW 2024.10.10 11.63 MB 60c1336150ae9497ac2721564a17e5bb Link
RUT2M_R_00.07.09.4_WEBUI.bin Mass production FW 2024.10.02 11.63 MB 34480337c61fdef1714b46b4dc462fbf Link
RUT2M_R_GPL_00.07.10.tar.gz SDK 2024.10.10 20.74 MB 600104ed9c38895d4ca5a70be0828d6a


Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.


FW checksums


Checksums for firmware files can be found here.

Changelog

RUT2M_R_00.07.07.1 | 2024.05.03


  • Improvements
    • Network
      • Mobile: improved connection establish time for uqmi protocol
    • System
      • WebUI: improved first login password change logic
      • Certificates: updated Root CA certificates
  • Fix
    • Network
      • Mobile: fixed denied roaming flag set
  • CVE Patches
    • CVE-2024-2397

RUT2M_R_00.07.07 | 2024.04.16

  • New
    • Network
      • WebUI: added ESM/EMM message notifications
      • WebUI: added internet status tracking configuration and overview widget
      • LAN: added a new IPv6 LAN status page
      • Static Leases: added a new IPv6 Static Leases page
      • WebUI: added custom domain name resolve option in “DNS” configuration page
      • Auto APN: added “uno.au-net.ne.jp” APN for “KDDI” operator
      • Auto APN: added 'eprivate010.tisparkle.com' APN for “Sparkle” operator
      • QoS: added mobile interface select option
      • Failover: added additional connection flush options
      • Wireless: added auto-reconnect disable functionality
      • Wireless: added ability to use PKCS#12 certificates for EAP-TLS authentication
      • VRF: added initial Virtual Routing and Forwarding support
    • Services
      • Post/Get: added I/O invert support
      • DLMS Client: added persistent TCP connections
      • Events Reporting: added unexpected shutdown event
      • Modbus Client: added 64bit data types
      • IPerf3: added iPerf3 to Package Manager
      • DNP3 Outstation: added I/O objects
      • TR-069: added PCI, LAC, TAC, EARFCN and Neighbour cells data to Device.MobileInfo node
      • Hotspot: added domain and subdomain options for external landing page
    • System
      • WebUI: added the ability to generate random passwords for password input fields
      • WebUI: added reset to “Factory defaults” option
      • System: changed firmware certificate verification tool
      • IP Block: added time-based login attempt blocking
      • WebUI: added firmware update notification support
      • PAM: added the ability to set port for TACACS+
      • Logging: added multiple remote syslog servers support
  • Improvements
    • Network
      • Static Leases: added possibility to use MAC with wildcard
      • WebUI: added ability to disable modem update notifications
      • WebUI: added additional field for warning threshold to allow entering value as percentage in Mobile Data Limit section
      • Mobile: improved mobile services stability when SIM card is lost during SMS sending
      • Mobile: updated bridge/passthrough mode logic to flush ARP and add static ARP entry if MAC is specified
      • Mobile: improved SIM switch logging and protection on failure to acquire data
      • WebUI: added partial data loading to APN database page
      • Mobile: improved SMS sending timeouts during network issues
      • Mobile: improved connection handling when data limit is reached
      • Mobile: added metric to default gateway when using passthrough mode
      • WebUI: added validation for 2 same APNs
      • WebUI: updated Band selection field to show duplex modes in Mobile General page
      • Mobile: improved connection establishment time on device boot up
      • Topology: changed network devices scanning application
      • WebUI: improved design of Status - LAN page
      • DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
      • DHCP: removed default disabled server configuration for WAN interface
      • WebUI: simplified data entry of DNS forwardings by separating hostname and IP address fields
      • BGP: added Virtual Routing and Forwarding (VRF) support
      • BGP: added multiple BGP instance support
      • WebUI: adjusted responsive design breakpoints
      • Dnsmasq: updated dnsmasq to version 2.89
      • WebUI: added an information icon and disabled delete button for wireless instance when it is associated with a hotspot interface
      • Wireless: improved hidden AP handling when showing scan results
    • Services
      • Wireguard: added option to bind tunnel to a specific interface
      • OPC UA Client: added limits (10 servers, 20 groups, 50 nodes per server, 50 values per group)
      • DLMS Client: increased maximum count of connection sections to 30
      • DLMS Client: added short name referencing
      • SNMP: set strict default community access when IPv6 address is used
      • SNMP: improved sysName OID to set device's hostname
      • OpenVPN: added the bridge option for selecting the network device to be bridged with
      • OpenVPN: added possibility to create more than one TAP client
      • Auto Reply: added available SMS message parameters to "Message text" input
      • Modbus Client: allow using diacritics in SMS alarms
      • Hotspot: moved MAC blocking option from Access Control to Hotspot page
      • WebUI: added MAC authentication support when using RADIUS authentication mode
      • WebUI: moved licenses to footer
      • SSTP: updated package version to 1.0.19
      • Mosquitto: updated package version to 2.0.17
    • System
      • WebUI: added more strict password requirements for restoring backup
      • SMTP: added option to either not verify SMTP server or upload SMTP server's CA file to verify authenticity
      • WebUI: Added the ability to choose the ROOT CA when using certificates from the device
      • WebUI: unified time format to ISO8601 across the entire WebUI
      • WebUI: added ability to choose imported certificate and key as 'Server certificate' and 'Server key' in 'Access Control'
      • WebUI: added 'Hosts' and 'IP Addresses' options for 'Simple' certificate generation and certificate signing
      • WebUI: changed firmware update option to server as a default option
      • GPL: added offline package preparation command for GPL builds
      • Speedtest: added multiple connections support to improve accuracy
      • Kernel: updated to version 5.15.149
      • Libcap: updated package version to 2.69
  • Fix
    • Network
      • Topology: fixed showing interfaces with assigned VLAN
      • WebUI: fixed static routing creation for GRE instance
      • Network: fixed DHCPv4 relay mode enabling
      • Mobile: fixed PIN code set after modem restart
      • Mobile: fixed an issue where using SIM change command on one SIM slot modems would reset connection
      • Mobile: fixed an issue where message storage would not be checked correctly
      • Mobile: fixed temperature value sometimes returning 0
      • Mobile: fixed issue where RSSI value was displayed as 0 when using 2G/3G network types
      • Failover: fixed Failover missing active rules when using multiple source and destination IP addresses
      • Failover: fixed an issue where failover would not function correctly while using a mobile interface
      • WebUI: fixed network and failover interface metric sorting synchronization issue
      • WebUI: fixed failover rule policy save issue with newly added WAN interface
      • Interfaces: fixed failover value for new WAN being taken from WAN that was just deleted
      • Wireless: fixed Wifi Scanner not saving scanned WiFi SSIDs
      • Wireless: fixed missing CCMP-256 and GCMP-256 cipher types in scan results
      • Wireless: fixed missing GCMP-256 cipher when using WPA3-EAP encryption in Client mode
      • Wireless: fixed skipped MAC address value for interface in Client mode
      • Wireless: fixed scanning issue when connected via the same network
      • Wireless: fixed mesh functionality
      • Wireless: fixed missing signal strength value on Client interfaces
      • Wireless: fixed Client interface taking excessive time to connect after boot
      • Wireless: fixed missing EAP authentication in Client mode
      • Wireless: fixed connected wireless clients being shown duplicated
      • WebUI: fixed mesh nodes not being shown in Status->Wireless->Interfaces page
      • WebUI: fixed proposed configuration settings when connecting to a mesh point network
      • MultiAP: fixed client not switching to another AP if incorrect password was provided
    • Services
      • Modbus Client: allow using negative floating point values in requests
      • Azure IoT Hub: fixed Data to Server minor WebUI dependency bugs
      • Azure IoT Hub: fixed 'contentType' telemetry message parameter
      • Data to Server: fixed DLMS data formating
      • Data to Server: fixed Network link state data display
      • DLMS Client: fixed segfault while reading profile generic COSEM object
      • DLMS Client: fixed profile generic entries reading
      • DLMS Client: fixed application memory allocation issues
      • SSTP: fixed route adding when default route is enabled
      • SNMP: fixed VLAN OID naming
      • OpenVPN: added fixes for instance status tracking functionality
      • OpenVPN: resolved uptime counting issues
      • PPTP: fixed PPTP instance deletion problem
      • PPTP: fixed problem related with routes when failover is enabled
      • Hotspot: fixed password validation for locally created users and signed-up users
      • Hotspot: fixed session invalidation after deleting registered user
      • Hotspot: fixed SMS OTP password reuse
      • Hotspot: fixed firewall rule creation
      • Modbus Client: fixed issue where service freezes when SMS alarm is sent
      • WebUI: fixed data loading error in Input/Output > Post/Get page
      • UPnP: updated package version to 2.3.4
      • ** System
      • NTP Client: fixed "Count of time synchronizations" execution when synchronization to mobile operator is chosen
      • Package Manager: fixed spinner message when restarting network after package upload or download
      • Package Manager: fixed supported devices check when installing a package from server
      • WebUI: fixed language install from uploaded package after upgrade with keep settings
      • WebUI: fixed an issue when a user was not logged out after changing profiles
      • Telnet: fixed segmentation fault during concurrent connections
      • CLI: fixed enter key issue on mobile chromium based browsers
      • System Users: fixed SSH session close after deleting user or disabling SSH access
      • Profiles: fixed profile migration with installed packages
      • WebUI: fixed Hotspot log page table search functionality
      • Speedtest: fix missing download speed on some servers
      • PAM: updated libpam to version 1.6.0
  • CVE Patches
      • CVE-2022-4603
      • CVE-2022-23308
      • CVE-2022-45061
      • CVE-2023-0466
      • CVE-2023-6129
      • CVE-2023-7042
      • CVE-2023-24329
      • CVE-2023-27043
      • CVE-2023-42366
      • CVE-2023-46218
      • CVE-2023-46219
      • CVE-2023-46752
      • CVE-2023-46753
      • CVE-2023-48795
      • CVE-2024-25062
      • CVE-2024-27913
      • CVE-2024-22365

RUT2M_R_00.07.06.10 | 2024.04.04


  • Global changelog for R_00.07.06.10 - LINK

RUT2M_R_00.07.06.8 | 2024.03.25


  • Firmware R_00.07.06.8 was removed due to an issue with inefficient memory allocation for LED control.

RUT2M_R_00.07.06.6 | 2024.03.04


  • Global changelog for R_00.07.06.6 - LINK

RUT2M_R_00.07.06.5 | 2024.02.24


  • Global changelog for R_00.07.06.5 - LINK

RUT2M_R_00.07.06.3 | 2024.01.17


  • Global changelog for R_00.07.06.3 - LINK

RUT2M_R_00.07.06 | 2023.12.20

  • New
    • Network
      • Enabled IPv6 by default for mobile interfaces
      • Added operator blacklisting and whitelisting based on mobile country code
      • Added SIM card not inserted event in Events Log
      • Added 802.11v BSS Transition Management and 802.11k Radio Resource Measurement
    • Services
      • Added OPC UA Server
      • Added the ability to set port for TACACS+ in PAM service
      • Added switch to enable using root certificate authority for MQTT alarms in Modbus Client services
      • Added new alarm action "Ubus event" in Modbus Client services
      • Added new input "Modbus alarms" in Data to Server service
      • Added wget ping subtype support in Events Reporting service
      • Added new I/O SNMP OID that returns numeric I/O state
      • Added new Post/Get service action "mobile_sim_pin" for changing used SIM PIN code on the device
    • WebUI
      • Renewed user interface design
      • Added network interface name change functionality
      • Added last resort configuration option for multiwan policy rules
      • Added indication when new modem firmware is available
      • Added mobile connection establishment display in mobile status page
      • Added default value for "Reset threshold" field in Low Signal Reconnect feature
    • System
      • Added ability to enable/disable SSH access for specific users in System Users
      • API support
  • Improvements
    • Network
      • Disabled operator scan when SIM card is not inserted
    • Services
      • Expanded GRE VPN keep alive functionality to disable routes from unreachable tunnel
      • Added PKCS#12 certificate container authentication method in IPsec VPN
      • Added TLV message_payload support for SNMP service
      • Added Purple.ai configuration profile
      • Added possibility to assign mobile interface in SQM service
      • Added additional anonymous phone number validation in Mobile Utilities service
      • Added "N/A" signal strength response in DNP3 service if SIM card is not inserted
    • WebUI
      • Improved Events Log page loading by adding asynchronous pagination
      • Removed requirement for Diffie-Hellman parameters in OpenVPN service
      • Added improvements for creating OpenVPN IPv6 configurations
      • Added auto redirect after changing router's IP address or port
      • Added "Interface" dropdown for interfaces selection in Wake on LAN service
      • Increased Data to Server service MQTT topic length limit to 65535 characters
      • Added OSPF external routes section to Status page
      • Moved device menu entry “Reboot” to header menu
      • Added indication in Overview, Status -> Mobile and WAN pages when mobile data limit is reached
      • Updated Operator state field to show if modem is in limited service
      • Combined Mobile Usage day, week, month and total pages into one
      • Updated Realtime data -> Mobile signal page design to show all available modems and their bands data in one graph
      • Added message when SIM card requires PIN/PUK code in Status -> Mobile page
      • Moved WiFi scanner page to Services section
    • System
      • Added Mosquitto CVE patch 2023-28366
      • Added Mosquitto CVE patch 2023-3592
      • Updated cURL version to 8.4.0
      • Updated kernel version to 5.4.259
      • Added RMS data display to generated troubleshoot
      • Added downloaded Package Manager packages list to generated troubleshoot
      • Added process activity load list to generated troubleshoot
      • Changed default OPKG feed to use Teltonika's URL
  • Fix
    • Network
      • Fixed DMVPN firewall rule creation issues
      • Fixed Failover missing active rules when using multiple source and destination IP addresses
      • Fixed mobile service crash due to buffer overflow while reading partially overwritten SMS
      • Fixed an issue with Manual APN connection making attempts too rapidly
      • Fixed deny data roaming functionality when transitioning between roaming and home operator network
      • Fixed network disconnection on mobile network detach and DHCP lease loss situations
      • Fixed VoLTE configuration after modem reboot
      • Fixed Mobile interface bridge and passthrough mode connectivity loss
      • Fixed an issue where rarely PIN code would get removed after SIM switch
      • Fixed mobile operator list being not updated after changes in WebUI
      • Fixed issue where mobile interface was unreachable after device reboot or interface restart while using Failover service
      • Fixed wireless client authentication failures when using AP and STA with WPA3-SAE authentication
      • Fixed STA connection failure to AP with hidden SSID using WPA3-SAE authentication
      • Fixed incorrect signal strength values in Wireless scan results
    • Services
      • Fixed SSH module enable in PAM service
      • Added minimum free space check when saving logs to flash in Logging service
      • Fixed "Set multiple coils" function sending too many bytes in Modbus Client services
      • Fixed multiple Events Reporting messages being sent when Firewall configuration is changed
      • Fixed VRRP instances advertising wrong virtual IPs
      • Added Hotspot information in SNMP MIB file
      • Fixed registered Hotspot Local Users showing random username
      • Fixed selection of MAC Auth for LAN interfaces in Hotspot service
      • Fixed inconsistent Hotspot login behaviour when using MAC Auth with Password
      • Fixed instance shutdown after last local user deletion
      • Fixed Cumulocity app not sending any telemetry data
      • Fixed Call Utilities failure when caller id is hidden during a call
      • Fixed default profile SMS Utilities I/O status rule configuration in Profiles functionality
    • WebUI
      • Fixed side menu style issues when Japanese language is used
      • Fixed displaying of vendor names in Topology page
      • Fixed language packs being selectable when still in Package Manager queue
      • Added ability to configure IPv6 BGP peer
      • Fixed RelayD configuration issues after keep settings
      • Fixed realtime graphs responsive design issues
      • Fixed not all LAN interfaces shown in dropdown in Hotspot service page
      • Fixed modem updater legacy firmware flashing
      • Fixed wireless realtime data to show signal as unavailable with no connected clients
      • Fixed WiFi scanner disconnecting AP users
      • Fixed setup wizard errors in Wireless configuration page
      • Fixed Unicode SSID representation in Wireless scan results
    • System
      • Patched FRR CVE-2023-38406
      • Patched FRR CVE-2023-38407
      • Patched FRR CVE-2023-41358
      • Patched FRR CVE-2023-41360
      • Patched FRR CVE-2023-41909
      • Patched FRR CVE-2023-47234
      • Patched FRR CVE-2023-47235
      • Patched OpenSSL CVE-2023-3446
      • Patched OpenSSL CVE-2023-3817
      • Patched LibXML2 CVE-2023-39615
      • Patched LibXML2 CVE-2023-45322
      • Patched FFMPEG CVE-2021-28429
      • Patched FFMPEG CVE-2022-48434
      • Patched dnsmasq CVE-2023-28450
      • Fixed running out of space when SSHFS is mounted in /tmp while generating troubleshoot

RUT2M_R_00.07.05.4 | 2023.11.09

  • Improvements
    • WebUI
      • Improved asynchronous pagination in events log pages
      • Optimized Overview page load
      • Added resource loading cancellation after switching to different page

RUT2M_R_00.07.05 | 2023.10.09

  • New
    • Network
      • Added "shared.m2m.ch" APN for Swisscom IoT operator to APN database
      • Added "gamma" APN to auto-APN database
      • Added "soracom.io" APN for Soracom operator to APN database
      • Added "simbase" APN to auto-APN database
      • Added "pnd" APN for Pond IoT to auto-APN database
      • Added "spitfire1" APN for Spitfire operator to APN database
      • New argument in "gsmctl" CLI command for Carrier aggregation
      • Numeric mode support for modem AT commands
      • Enabled dynamic MTU configuration on mobile interfaces by default
      • WDS support for wireless bridging
    • Services
      • DLMS Client package
      • 7zip package
      • TincVPN package
      • Added router uptime and mobile connection uptime data parameters to SNMP
      • Custom MQTT publisher/subscriber topics definition support
      • Alternative configuration file upload support for MQTT Broker service
      • Device Provisioning Service support for Azure IoT Hub service
      • Added more mobile usage parameters to SNMP
    • WebUI
      • Firewall status page
      • Page search feature
      • Network Topology page
      • "Allow insecure connection" option for MQTT TLS protocol in Data to Server service
      • Package Restore feature Enable/Disable option
      • Hotspot client connection/disconnection trap option for SNMP service
      • Added Events log trap option for SNMP service
      • Confirm dialog when cancelling a verified package in Package Manager
      • "Bridge ALPN" option for Bridge configuration in MQTT Broker service
      • New subtypes of events that specify a specific port on "Events Reporting" and "SNMP Trap rules" pages
      • Specific firmware packages repository link in Package Manager page
      • Ability to enter decryption passphrase for encrypted private keys
      • "Reconnect" button in RMS page
      • New event "Device startup completed" in Events Reporting service
      • Port status and configuration page
      • Wireless interface QR code generator
      • Channel analysis page Status -> Wireless -> Channel Analysis
      • Disabled direct network interface deletion when it is associated with a wireless interface
      • Limited to a single section configuration and added IP address field for Relayd service
      • "Fast roaming" configuration for Wireless service in Client mode
      • Updated Status->Network->Wireless page to display interfaces as cards and added ability to filter connected clients by selected interface
      • Modem Debug page
      • APN database management page added to package manager
      • Added "Message forwarding" option in SMS Rules page when rule type is "Execute custom script"
      • Ability to unblock SIM card and insert SIM PIN in Overview page
      • New SMS rules "Reset mobile connection" and "Reload config"
      • "SMS limit clear due" display in Overview page
      • Added modem temperature to System -> Status page
      • IP6 table configuration option for DHCPv6 protocol in Network -> WAN page
    • System
      • Mechanism to rebrand WebUI using GPL
      • Possiblity to create web applications with closed-source GPL
  • Improvements
    • Network
      • Moved FRR VTYSH package to package manager
      • Made newly created Firewall Traffic, NAT rules and Port Forwards disabled by default
      • Improved Interfaces to enable IPv6 DHCP server when mobile v6 or v4v6 PDP type is set
      • Improved auto APN selection
      • SMS sending event is now logged into events log
      • Improved roaming control
      • Removed unused APN usernames and passwords from auto-APN database
      • Added connection to the operator when no mobile interfaces are active
      • Improved VoLTE management functions
      • Improved cases where Low Signal Reconnect sometimes executed prematurely
      • Improved wrong SIM PIN remove logic
      • Added automatic reconfiguration when switching between wireless interface modes
      • Added automatically generated name option for new network
      • WPA3/WPA2 (PSK/SAE) mixed mode is now default encryption standard
      • Improved operator information parsing logic on MeiG modem
    • Services
      • New reworked Data to Server
      • UPNP moved to package manager
      • Added IPv6 support for Modbus TCP Server/Client services
      • Refactored Azure IoT Hub service
      • Improved resiliency to timeouts in Modbus Client service
      • Added PDU data type to Modbus read requests
      • Added new formatters for MQTT alarms in Modbus Client service
      • Added main section to make test functions independent in Modbus Client service
      • Improved WAN IP register reading time in Modbus service
      • Sped up default profile and profile template generation for Profiles functionality
      • Optimized profile change time for Profiles functionality
      • Added IPv6 support for Stunnel VPN
      • Added MAC blocking for client connections after set amount of failed login attempts in Hotspot service
      • Improved TCPdump by allowing to capture packets from any interface
      • Added OSPF support for DMVPN
      • Updated Hotspot password hashing to sha512
      • A single SMS message with multiple PDUs is sent instead of multiple SMS messages in Email to SMS service
      • Allowed connection to SMPP server using IPv6 address
      • Extended IP unblock action functionality in SMS Utilities
      • Increased allowed Email to SMS service message size to 61440 bytes
      • Added I/O pin name to trap notification message
    • WebUI
      • Reorganized menu
      • Updated header design
      • Split Interfaces configuration in Advanced mode into two pages: WAN and LAN, identically as in Basic WebUI mode
      • Moved Interfaces IPv6 configuration into seperate tab
      • Added client/server status information in OpenVPN instance overview page
      • Added more IPv6 information to interface status in Interfaces page
      • Removed "Custom delegated IPv6-prefix" field from DHCPv6 configuration in Interfaces page
      • Disabled DHCPv6 interface editing while in basic mode
      • Refactored custom DHCP options into seperate modal
      • Added automatic start and end IP allocation for DHCP server configuration in Interfaces
      • Added client/server status information in L2TP VPN page
      • Added "MTU" field to L2TP client configuration page
      • Added CHAP, PAP and MSCHAP-v2 authentication fields to L2TP instance configuration
      • Added more detailed IPsec VPN status information
      • Encryption AES-256-CBC added as default in OpenVPN
      • Added "Authentication algorithm" support to OpenVPN configuration with static key mode
      • Added GRE (DMVPN) VPN tunnel source support to any instead of specific interface
      • Improved Hotspot landing page theme package removal
      • Added upload and download theme functionality to Hotspot Landing page
      • Improved ZeroTier VPN bridge configuration
      • Added ability to adjust order of rules in Firewall page
      • Added IPv6 RAW table to be displayed in Status -> Firewall
      • Improved file upload component"s visual appearance
      • Change "Allow anonymous" option default value to 0 in MQTT Broker
      • Added option to specify "Client ID" in MQTT Publisher
      • Added functionality to select specific interface in Web Filter service
      • Allowed to select FTP server subfolder in Traffic Logging service
      • Renamed various service master/slave naming convention in config files, package names and webUI to client/server
      • Added "Create static" button in Status -> Network -> LAN which bind DHCP lease for device
      • Updated Status -> Network -> Mobile page layout
      • Added bandwidth, provider in Status -> Network -> Mobile page
      • Added colors for signal strength values in Status -> Network -> Mobile page
      • Added frequency, pcid, mcc, mnc and LAC values in Status->Network->Mobile page
      • Refactored network type selection in Network -> Mobile -> General page
      • Serving cell information is not returned anymore when SIM card is not inserted
      • Added button in a Scanned operators table which allows to add an operator to the operator list
      • Added search bar in Mobile Utilities -> SMS Utilities page
      • Added SMS sent and limit count to Network -> Mobile -> General page
      • Updated Mobile Signal graphs to show EC/IO and RSCP values when network type is 3G
      • Added DFS channel marking in Network -> Wireless
      • Show wireless MAC address even when interface is inactive in Status -> System page
      • Merged Multi AP configuration to wireless interface edit modal
      • Added automatic network switch to bridge if selected in Wireless configuration
      • Added default encryption for newly created wireless interfaces
      • Simplified "802.11r Fast Transition" configuration options in Wireless interface configuration
    • System
      • Updated kernel version to 5.4.251
      • Updated UCI version to 2021-10-22
      • Updated SSHFS version to 3.7.1
      • Updated FRR suite to 8.4.2
      • Updated cURL version to 8.2.0
      • Updated TCPdump version to 4.99.4
      • Updated C-ares version to 1.19.1
      • Updated curl version to 7.88.0
      • Updated iproute2 version to 5.19.0
      • Updated libubox package version to 2021-08-19
      • Added CVE patch CVE-2023-2650
      • Added additional firmware information in CLI prompt banner
      • Connection mode LED now blinks on data transfer
      • Changed "routername" to "devicename" in system config file
      • Made all clients get disconnected out once dropbear service is disabled
      • Improved firmware downgrade restrictions for certain regions
      • Device name is now displayed in browser tab when in WebUI login page
      • Added NF conntrack information in generated troubleshoot archive
  • Fix
    • Network
      • Fixed UDP Broadcast Relay service crashing on start without physical network device
      • Fixed SMS limit period migration
      • Fixed SMS limit size breaking various functionality
      • Fixed custom IPv6 DNS option not overriding default DNS from operator
      • Fixed an issue with blacklist and whitelist connection
      • Fixed multipart SMS handling
      • Fixed wrong SIM state display when SIM is fully blocked
      • Fixed incorrect virginmobile APN MNC
      • Fixed mobile operator scanning fault when no mobile interfaces are active
      • Fixed mobile interfaces generating multiple events on mobile connection
      • Fixed PDU SMS parsing when operator provides user data header in single part SMS
      • Added scheduled data limit clear for inactive mobile interfaces
      • Fixed wrong or empty WAN state info
      • Fixed Wireless scanning issue with certain configuration
      • Fixed Wireless transmit power changing without user input after saving different country code
      • Fixed clients isolation functionality in Wireless
      • Fixed Wireless STA authentification failure in case of channel change
      • Fixed Multi AP startup when changing Multi AP configuration in Wireless
      • Fixed client connection to EAP Wireless network
      • Fixed LTE band 14 management with Quectel modems
      • Fixed Wireless disconnection issues
      • Fixed connection tracking for main interface in Failover
    • Services
      • Fixed reconnecting to inactive connections for Modbus Server service
      • Fixed Modbus Client response after reboot write request
      • Fixed Modbus Server to show error when trying to get operator name without SIM
      • Updated Modbus Client to handle large numbers of schedule rules, when frequency is set to schedule (Daini
      • Fixed “Input” rule displaying incorrect and missing ports in Network -> Firewall -> Traffic Rules
      • Fixed WireGuard VPN endpoint resolving problem
      • Peer cache is no longer deleted when ZeroTier service is restarted
      • Fixed RMS data collection about the list of devices connected to WiFi
      • Fixed showing incorrect Internet state in RMS
      • Fixed WiFi client info display in RMS
      • Implemented error handling when device is blocked or unrecognized by RMS
      • Fixed L2TP client sometimes not adding routes on successful connection
      • Fixed NTP time sync with browser functionality in some edge cases
      • Fixed reinstalled packages" verification when device name is changed
      • Fixed an issue where signal query would return invalid value instead of error in case of no signal in MQTT Publisher service
      • Fixed OpenVPN firewall rule creation for both IPv4 and IPv6
      • Fixed OpenVPN server crash loop after changing authentification from TLS to Static Key
      • Fixed IPsec VPN connection problem with small lifetime values
      • Fixed IPsec "Default Route" not working when Flow Offloading is enabled
      • Fixed an issue where system directory could be used as a mount point in SSHFS service
      • Fixed IP block feature to unblock an OpenVPN IP address on successful authentification
      • Fixed package installation process bug when packages have different architecture names
      • Added "bearer token" authentication functionality in Dynamic DNS
      • Fixed MQTT Broker "local_port" option keep settings migration
      • Remove public keys when key-based authentication is disabled in Access Control
      • Fixed "Parity" field "Mark" and "Space" options being ignored in DNP3 Serial services
      • Corrected SNMP MIB file syntax according to standards
      • Fixed returned port count in SNMP
      • Fixed disabled CLI remote access taking up a session slot
      • Fixed received SMS messages" parsing with trailing whitespaces
      • Fixed VPN status rule message text in SMS Utilities
    • WebUI
      • Fixed empty events cards in Overview page when no content is available
      • Fixed modal form inputs not clearing upon closing after nested modal is saved
      • Fixed select menu closing when selecting custom option
      • Fixed multi select expanding table row when adding new values
      • Fixed global section caching after deleting a section in a table
      • Fixed unpredictable search logic in tables
      • Fixed interfaces reordering by metrics in Failover page
      • Removed ability to select ports on ICMP and ESP protocol in Failover page
      • Fixed wrong status when interface is disabled in Failover page
      • Fixed firewall zone and rule creation/deletion on VPN configuration creation/deletion
      • Fixed STP enabling issue in Interfaces
      • Fixed EIGRP status info in Dynamic Routes
      • Fixed issue with custom DHCP options where you could not have multiple values per rule
      • Fixed Routing/NAT Offloading section display in Network -> Firewall -> General Settings when device is not supported
      • Fixed SSH/HTTP/HTTPS/ICMP setting in Network -> Firewall -> Attack Prevention page
      • Fixed failing Firewall rules with united protocol formats
      • Fixed zone select component not closing options menu when selecting an option in Firewall pages
      • Fixed memory leak when cancelling file uploads on Chromium-based browser
      • Fixed group settings saving by removing deprecated ":section" routes in Administration -> User Settings -> System Users
      • Fixed allowing IDs above 247 in Modbus Client service
      • Fixed selecting SIM in Modbus Client service Alarms
      • Fixed Modbus Alarm telephone number limit
      • Fixed to show available options for test requests on error in Modbus Client service
      • Fixed Modbus Alarm I/O pin display values
      • Fixed issue when creating instance named "gre" does not show in GRE VPN
      • Remote endpoint field now allows underscore character in IPsec VPN
      • Fixed ZeroTier wrong service status display in Status -> Services
      • Fixed problems with L2TP/PPTP VPN firewall rules automatic creation
      • Fixed problem related to the enable/disable toggle in OpenVPN instance overview page
      • Added fixes for key-direction missing problem when uploading OpenVPN config file
      • Fixed login page read-only inputs after custom user logout
      • Fixed issue when double clicking firmware upgrade cancel button returned error
      • Fixed Package Manager prompt message to appear when package requires network restart
      • Fixed showing in queue packages when they contained special symbols in the Package Manager page
      • Fixed various visual Side Widget bugs
      • Fixed Data to Server DNP3 filter from flash display
      • Fixed incorrect source data displayed in Realtime Data -> Connections table
      • Fixed memory expansion confirmation prompt title
      • Fixed incorrect configuration saving in Hotspot 2.0 service
      • Disabled password hashing for new user creation in Hotspot service
      • Fixed Hotspot landing page themes saving bug
      • Fixed test email sending to more than one recipient in Events Reporting page
      • Fixed VLAN OID values in SNMP service
      • Output proper error message in case of hardware not being supported in Firmware Upgrade
      • Fixed being able to open side widget when user does not have read access
      • Fixed profile creation when current configuration is not present
      • Fixed wrong protocol data display in "Access control" page
      • Fixed LAN interfaces not showing up before WAN interfaces in Status -> Realtime Data -> Traffic
      • Fixed carrier aggregation information when no connection is made or SIM card is not inserted
      • Changed representation of mobile cell ID from hexadecimal to integer type
      • Fixed Mobile Utilities "SMS forwarding to HTTP" URL generation
      • Fixed an issue where sometimes bands were not represented correctly on certain modems
      • Fixed provider information and IMSI value representation when SIM and modem cannot provide this information
      • Fixed mobile pages throwing 404 error when modem disconnects
      • Fixed WebUI showing mobile connection when no SIM card is inserted
      • Updated Network -> Wireless interface add and delete button visibility in basic mode
      • Fixed Wireless Multi AP incorrect SSID list after removal of an instance
      • Fixed MAC address filtering in Network -> Wireless page to list only connected WiFi devices
      • Fixed "Clear Collect Data" button logic to not clear overall mobile usage info
      • Fixed "Used data" showing large negative numbers for disabled mobile interfaces with Data Limit enabled
      • Fixed error when user has no write permissions in Speed Test page
    • System
      • Patched CVE-2023-0386 vulnerability
      • Patched CVE-2023-0464 vulnerability
      • Patched CVE-2023-0465 vulnerability
      • Patched CVE-2023-2602 vulnerability
      • Patched CVE-2023-3772 vulnerability
      • Patched CVE-2023-4128 vulnerability
      • Patched CVE-2023-33476 vulnerability
      • Patched CVE-2023-28484 vulnerability
      • Patched CVE-2023-29469 vulnerability
      • Patched CVE-2023-31490 vulnerability
      • Patched CVE-2023-36369 vulnerability
      • Patched CVE-2023-48174 vulnerability
      • Delayed Custom Scripts execution on boot, after storage devices are mounted
      • Fixed Custom Scripts permissions after save
      • Changed certificate expiry calculation mechanism to fix Y2K38 bug
      • Fixed downloading of certificates that have a space in their name in Administration -> Certificates -> Certificates Manager
      • Fixed Events Log database rotation to prevent log partition space exhaustion
      • Fixed duplication and sorting of all events IDs in Events Log
      • Fixed FOTA crash when current hours is with leading 0
      • Fixed crontab job removal after disabling FOTA
      • Changed Mosquitto build options to not include cJSON library
      • Fixed device name resetting to default upon refresh in Administration

RUT2M_R_00.07.04.5 | 2023.07.24

  • New features
    • Initial FW release