8,290
edits
Changes
no edit summary
After clicking 'Add' you will be redirected to the newly added server instance configuration page.
After clicking 'Add' you will be redirected to the newly added server instance configuration page.
[[File:Networking_rutos_manual_modbus_modbus_serial_server_configuration_rs232_{{#ifeq:{{#expr: {{{rs232}}} or {{{usb}}}}} |1|1|0}}_v1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_modbus_modbus_serial_server_configuration_rs232_{{#ifeq:{{#expr: {{{rs232}}} or {{{usb}}}}} |1|1|0}}_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>integer [0..255]; default: <b>1</b></td>
<td>integer [0..255]; default: <b>1</b></td>
<td>Specifies which serial port will be used for serial communication.</td>
<td>Specifies which serial port will be used for serial communication.</td>
</tr>
<tr>
<td>Mobile Data type</td>
<td>Bytes {{!}} Kilobytes {{!}} Megabytes; default: <b>Bytes</b></td>
<td>Selects mobile data unit representation type.</td>
</tr>
</tr>
<tr>
<tr>
<tr>
<tr>
<td>Data type</td>
<td>Data type</td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool {{!}} PDU; default: <b>16bit INT, high byte first</b></td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool {{!}} PDU; default: <b>16bit INT, high byte first</b></td>
<td>Defines how read data will be stored.</td>
<td>Defines how read data will be stored.</td>
</tr>
</tr>
<tr>
<tr>
<td>Compared condition data type</td>
<td>Compared condition data type</td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
<td>Select data type that will be used for checking conditions.</td>
<td>Select data type that will be used for checking conditions.</td>
</tr>
</tr>
<tr>
<tr>
<td>Action</td>
<td>Action</td>
<td>Ubus event {{!}} {{#ifeq:{{{mobile}}}|1|<span style="color: #0054a6;">SMS</span> {{!}}|}} <span style="color: purple;">MODBUS Write Request</span>{{#switch:{{{series}}}|TCR1|TRB2|TRB2M=|#default= {{!}} Trigger output}} | <span style="color: red;">MQTT message</span>; default: <b>MODBUS Write Request</b></td>
<td>Ubus event {{!}} {{#ifeq:{{{mobile}}}|1|<span style="color: #0054a6;">SMS</span> {{!}}|}} <span style="color: purple;">MODBUS Write Request</span>{{#switch:{{{series}}}|TCR1|OTD140|OTD160|OTD500|RUT14X=|#default= {{!}} <span style="color: green;">Trigger output</span>}} | <span style="color: red;">MQTT message</span>; default: <b>MODBUS Write Request</b></td>
<td>Action that will be taken if the condition is met. Possible actions:
<td>Action that will be taken if the condition is met. Possible actions:
<ul>{{#ifeq: {{{mobile}}} | 1 |
<ul>{{#ifeq: {{{mobile}}} | 1 |
<li><b>SMS</b> - sends and SMS message to a specified recipient(s).</li>|}}
<li><b>SMS</b> - sends and SMS message to a specified recipient(s).</li>|}}
<li><b>Modbus Request</b> - sends a Modbus Write request to a specified server.</li>
<li><b>Modbus Request</b> - sends a Modbus Write request to a specified server.</li>
{{#switch:{{{series}}}|TCR1|TRB2|TRB2M=|#default=<li><b>Trigger output</b> - changes state of selected I/O output pin.</li>}}
{{#switch:{{{series}}}|TCR1|OTD140|OTD160|OTD500|RUT14X=|#default=<li><b>Trigger output</b> - changes state of selected I/O output pin.</li>}}
</ul>
</ul>
</td>
</td>
<tr>
<tr>
<td><span style="color: purple;">MODBUS Write Request: Executed action data type</span></td>
<td><span style="color: purple;">MODBUS Write Request: Executed action data type</span></td>
<td>8bit INT | 8bit UINT | 16bit INT, high byte first | 16bit INT, low byte first | 16bit UINT, high byte first | 16bit UINT, low byte first | 32bit float (various Byte order) | 32bit INT (various Byte order) | 32bit UNIT (various Byte order) | ASCII | Hex | Bool; default: <b>Bool</b></td>
<td>8bit INT | 8bit UINT | 16bit INT, high byte first | 16bit INT, low byte first | 16bit UINT, high byte first | 16bit UINT, low byte first | 32bit float (various Byte order) | 32bit INT (various Byte order) | 32bit UNIT (various Byte order) 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII | Hex | Bool; default: <b>Bool</b></td>
<td>Select data type that will be used for executing action.</td>
<td>Select data type that will be used for executing action.</td>
</tr>
</tr>
<td>integer [0..65535]; default: <b>none</b></td>
<td>integer [0..65535]; default: <b>none</b></td>
<td>Register/Coil values to be written (multiple values must be separated by space character).</td>
<td>Register/Coil values to be written (multiple values must be separated by space character).</td>
</tr>{{#switch:{{{series}}}|TCR1|TRB2|TRB2M=|#default=
</tr>{{#switch:{{{series}}}|TCR1|OTD140|OTD160|OTD500|RUT14X=|#default=
<tr>
<tr>
<td><span style="color: green;">Trigger output: Output</span></td>{{#switch:{{{series}}}
<td><span style="color: green;">Trigger output: Output</span></td>{{#switch:{{{series}}}
| RUTX|RUT2 =<td>4PIN output; default: <b>4PIN output</b></td>
| RUTX|RUT2|RUT2M =<td>Output (4); default: <b>Output (4)</b></td>
| TRB1|RUT3 =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>
| TRB1={{#ifeq:{{{name}}}|TRB141|<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4) {{!}} Relay (3,4,5) {{!}} Latching Relay (11,12,13); default: <b>Configurable Input/Output (3)</b></td>|<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>}}|RUT30X|RUT301|RUT36X|RUT361|TRB5 =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>
| RUT9 =<td>Open collector output {{!}} Relay output {{!}} 4PIN output; default: <b>Open collector output</b></td>}}
| TRB2|TRB2M =<td>Configurable Input/Output (2) {{!}} Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (2)</b></td>
| RUT9|RUT9M =<td>Output (4) {{!}} Isolated Output (3,4,8) {{!}} Relay (5,10); default: <b>Output (4)</b></td>}}
<td>Selects which output will be triggered.</td>
<td>Selects which output will be triggered.</td>
</tr>
</tr>
Notice the Global section config. It is used to outright turn the service off or on if any active configurations are present.
Notice the Global section config. It is used to outright turn the service off or on if any active configurations are present.
[[File:File:Networking rutos manual modbus modbus serial client global button v1.png|border|class=tlt-border]]
[[File:Networking rutos manual modbus modbus serial client global button v1.png|border|class=tlt-border]]
Clicking the Cog icon opens a modal window. The global configuration slider can be set and it's state saved.
Clicking the Cog icon opens a modal window. The global configuration slider can be set and it's state saved.
<tr>
<tr>
<td>Data type</td>
<td>Data type</td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool {{!}} PDU; default: <b>16bit INT, high byte first</b></td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool {{!}} PDU; default: <b>16bit INT, high byte first</b></td>
<td>Defines how read data will be stored.</td>
<td>Defines how read data will be stored.</td>
</tr>
</tr>
<tr>
<tr>
<td>Compared condition data type</td>
<td>Compared condition data type</td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
<td>Select data type that will be used for checking conditions.</td>
<td>Select data type that will be used for checking conditions.</td>
</tr>
</tr>
<tr>
<tr>
<td>Action</td>
<td>Action</td>
<td>{{#ifeq:{{{mobile}}}|1|SMS {{!}}|}} MODBUS Write Request{{#switch:{{{series}}}|TCR1|TRB2|TRB2M=|#default= {{!}} Trigger output}}; default: <b>MODBUS Write Request</b></td>
<td>{{#ifeq:{{{mobile}}}|1|SMS {{!}}|}} MODBUS Write Request{{#switch:{{{series}}}|TCR1|OTD140|OTD160|OTD500|RUT14X=|#default= {{!}} <span style="color: green;">Trigger output</span>}}; default: <b>MODBUS Write Request</b></td>
<td>Action that will be taken if the condition is met. Possible actions:
<td>Action that will be taken if the condition is met. Possible actions:
<ul>{{#ifeq: {{{mobile}}} | 1 |
<ul>{{#ifeq: {{{mobile}}} | 1 |
<li><b>SMS</b> - sends and SMS message to a specified recipient(s).</li>|}}
<li><b>SMS</b> - sends and SMS message to a specified recipient(s).</li>|}}
<li><b>Modbus Request</b> - sends a Modbus Write request to a specified server.</li>
<li><b>Modbus Request</b> - sends a Modbus Write request to a specified server.</li>
{{#switch:{{{series}}}|TCR1|TRB2|TRB2M|#default=<li><b>Trigger output</b> - changes state of selected I/O output pin.</li>}}
{{#switch:{{{series}}}|TCR1|OTD140|OTD160|OTD500|RUT14X=|#default=<li><b>Trigger output</b> - changes state of selected I/O output pin.</li>}}
</ul>
</ul>
</td>
</td>
<tr>
<tr>
<td><span style="color: purple;">MODBUS Write Request: Executed action data type</span></td>
<td><span style="color: purple;">MODBUS Write Request: Executed action data type</span></td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UNIT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>Bool</b></td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UNIT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>Bool</b></td>
<td>Select data type that will be used for executing action.</td>
<td>Select data type that will be used for executing action.</td>
</tr>
</tr>
<td>integer [0..65535]; default: <b>none</b></td>
<td>integer [0..65535]; default: <b>none</b></td>
<td>Register/Coil values to be written (multiple values must be separated by space character).</td>
<td>Register/Coil values to be written (multiple values must be separated by space character).</td>
</tr>{{#switch:{{{series}}}|TCR1|TRB2|TRB2M=|#default=
</tr>{{#switch:{{{series}}}|TCR1|OTD140|OTD160|OTD500|RUT14X=|#default=
<tr>
<tr>
<td><span style="color: green;">Trigger output: Output</span></td>{{#switch:{{{series}}}
<td><span style="color: green;">Trigger output: Output</span></td>{{#switch:{{{series}}}
| RUTX|RUT2 =<td>4PIN output; default: <b>4PIN output</b></td>
| RUTX|RUT2|RUT2M =<td>Output (4); default: <b>Output (4)</b></td>
| TRB1|RUT3 =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>
| TRB1={{#ifeq:{{{name}}}|TRB141|<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4) {{!}} Relay (3,4,5) {{!}} Latching Relay (11,12,13); default: <b>Configurable Input/Output (3)</b></td>|<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>}}|RUT30X|RUT301|RUT36X|RUT361|TRB5 =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>
| RUT9 =<td>Open collector output {{!}} Relay output {{!}} 4PIN output; default: <b>Open collector output</b></td>}}
| TRB2|TRB2M =<td>Configurable Input/Output (2) {{!}} Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (2)</b></td>
| RUT9|RUT9M =<td>Output (4) {{!}} Isolated Output (3,4,8) {{!}} Relay (5,10); default: <b>Output (4)</b></td>}}
<td>Selects which output will be triggered.</td>
<td>Selects which output will be triggered.</td>
</tr>
</tr>
<tr>
<tr>
<td>Data type</td>
<td>Data type</td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
<td>Defines how read data will be stored.</td>
<td>Defines how read data will be stored.</td>
</tr>
</tr>
<tr>
<tr>
<td>Compared condition data type</td>
<td>Compared condition data type</td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
<td>Select data type that will be used for checking conditions.</td>
<td>Select data type that will be used for checking conditions.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color: purple;">MODBUS Write Request: Executed action data type</span></td>
<td><span style="color: purple;">MODBUS Write Request: Executed action data type</span></td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UNIT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>Bool</b></td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UNIT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>Bool</b></td>
<td>Select data type that will be used for executing action.</td>
<td>Select data type that will be used for executing action.</td>
</tr>
</tr>
