Difference between revisions of "Template:Networking tswos manual ports"
(5 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
− | {{Template: | + | {{Template: Networking_device_manual_fw_disclosure |
− | | fw_version ={{Template: | + | | series = {{{series}}} |
+ | | name = {{{name}}} | ||
+ | | fw_version ={{Template: Networking_device_manual_latest_fw | ||
| series = {{{series}}} | | series = {{{series}}} | ||
| name = {{{name}}} | | name = {{{name}}} | ||
Line 12: | Line 14: | ||
==General== | ==General== | ||
− | In this section you can enable <b> | + | In this section you can enable <b>Jumbo frames</b> and <b>LLDP frame filter</b> services. |
− | [[File: | + | [[File:Networking_tswos_manual_ports_general_v2.png|border|class=tlt-border]] |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 31: | Line 33: | ||
<td>off {{!}} on; default: <b>off</b></td> | <td>off {{!}} on; default: <b>off</b></td> | ||
<td>Enable to stop the forwarding of LLDP frames.</td> | <td>Enable to stop the forwarding of LLDP frames.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>IGMP snooping</td> | ||
+ | <td>off {{!}} on; default: <b>off</b></td> | ||
+ | <td>Enables IGMP snooping.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Multicast querier</td> | ||
+ | <td>off {{!}} on; default: <b>off</b></td> | ||
+ | <td>Enables multicast querier.</td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
Line 271: | Line 283: | ||
You will be redirected to `Port security settings`. From here you can enable/disable ports or change security settings: | You will be redirected to `Port security settings`. From here you can enable/disable ports or change security settings: | ||
− | [[File: | + | [[File:Networking tswos manual ports port security port settings settings v2.png|border|class=tlt-border]] |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 293: | Line 305: | ||
<td>Accept {{!}} Reject; default: <b>Accept</b></td> | <td>Accept {{!}} Reject; default: <b>Accept</b></td> | ||
<td>"Accept" gives anyone access to the port when the radius server is unreachable. "Reject" only unblocks the port if radius server explicitly authorizes it.</td> | <td>"Accept" gives anyone access to the port when the radius server is unreachable. "Reject" only unblocks the port if radius server explicitly authorizes it.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Fallback VLAN</td> | ||
+ | <td>Disabled {{!}} VLAN; default: <b>Disabled</b></td> | ||
+ | <td>Indicates fallback VLAN</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Reject VLAN</td> | ||
+ | <td>Disabled {{!}} VLAN; default: <b>Disabled</b></td> | ||
+ | <td>Indicates reject VLAN</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Accept VLAN</td> | ||
+ | <td>Radius assigned {{!}} vlan1(ID: 1); default: <b>vlan1(ID: 1)</b></td> | ||
+ | <td>Indicates accept VLAN</td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
− | ===Port Status=== | + | ====Port Status==== |
---- | ---- | ||
This section displays port status information. There is also an option to select, enable ports security, choose RADIUS server and change RADIUS unreachable action: | This section displays port status information. There is also an option to select, enable ports security, choose RADIUS server and change RADIUS unreachable action: | ||
Line 329: | Line 356: | ||
</table> | </table> | ||
+ | ===RADIUS=== | ||
+ | |||
+ | The <b>RADIUS</b> page is used to create and manage radius servers: | ||
+ | |||
+ | [[File:Networking_tswos_manual_ports_port_security_radius.png|border|class=tlt-border]] | ||
+ | |||
+ | <table class="nd-othertables_2"> | ||
+ | <tr> | ||
+ | <th width="250">Field Name</th> | ||
+ | <th width="900">Description</th> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>ID</td> | ||
+ | <td>RADIUS server ID.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Address (IPv4)</td> | ||
+ | <td>RADIUS server IP.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Authentication port</td> | ||
+ | <td>RADIUS server athentication port.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Secret</td> | ||
+ | <td>RADIUS server secret.</td> | ||
+ | </tr> | ||
+ | </table> | ||
+ | |||
+ | ====Radius Configuration==== | ||
+ | ---- | ||
+ | The RADIUS configuration window should look similar to this: | ||
+ | |||
+ | [[File:Networking_tswos_manual_ports_port_security_radius_configuration.png|border|class=tlt-border]] | ||
+ | |||
+ | <table class="nd-mantable"> | ||
+ | <tr> | ||
+ | <th>Field</th> | ||
+ | <th>Value</th> | ||
+ | <th>Description</th> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Address (IPv4/IPv6)</td> | ||
+ | <td>ip; default: <b>0.0.0.0</b></td> | ||
+ | <td>RADIUS server IP.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Authentication port</td> | ||
+ | <td>interger [1.. 65535]; default: <b>1812</b></td> | ||
+ | <td>RADIUS server athentication port.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Secret</td> | ||
+ | <td>string; default: <b>-</b></td> | ||
+ | <td>RADIUS server secret.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Test connectivity</td> | ||
+ | <td>-(interactive) button</td> | ||
+ | <td>Test connectivity to RADIUS server.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Test user credentials</td> | ||
+ | <td>-(interactive) button</td> | ||
+ | <td>Test credentials to RADIUS server.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Enable backup RADIUS server</td> | ||
+ | <td>off {{!}} <span style="color: red;">on</span>; default: <b>off</b></td> | ||
+ | <td>Enable backup RADIUS server.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td><span style="color: red;">Address (IPv4/IPv6)</span></td> | ||
+ | <td>ip; default: <b>none</b></td> | ||
+ | <td>Backup RADIUS server IP.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td><span style="color: red;">Authentication port</span></td> | ||
+ | <td>interger [1.. 65535]; default: <b>none</b></td> | ||
+ | <td>Backup RADIUS server athentication port.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td><span style="color: red;">Secret</span></td> | ||
+ | <td>string; default: <b>-</b></td> | ||
+ | <td>Backup RADIUS server secret.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td><span style="color: red;">Test connectivity</span></td> | ||
+ | <td>-(interactive) button</td> | ||
+ | <td>Test connectivity to backup RADIUS server.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td><span style="color: red;">Test user credentials</span></td> | ||
+ | <td>-(interactive) button</td> | ||
+ | <td>Test credentials to backup RADIUS server.</td> | ||
+ | </tr> | ||
[[Category:{{{name}}} Network section]] | [[Category:{{{name}}} Network section]] |
Revision as of 11:54, 7 May 2024
The information in this page is updated in accordance with firmware version .
Summary
The Ports page provides information related to the status of the device's physical ports, as well as the ability to edit port settings, security, loopback detection.
General
In this section you can enable Jumbo frames and LLDP frame filter services.
Field | Value | Description |
---|---|---|
Jumbo frames | off | on; default: on | Allow ethernet frame with a payload greater than the standard maximum transmission unit (MTU) of 1500 bytes. This may improve network performance by making data transmissions more efficient. |
LLDP frame filter | off | on; default: off | Enable to stop the forwarding of LLDP frames. |
IGMP snooping | off | on; default: off | Enables IGMP snooping. |
Multicast querier | off | on; default: off | Enables multicast querier. |
Port Settings
This section displays information about the status of the device's ports with the ability to configure port settings.
Port Settings
The figure below is an example of the All Ports window, color indicates port speed and status:
[[File:Networking_tswos_manual_ports_ports_settings_port_settings_{{{poe}}}.png|border|class=tlt-border]]
To change port settings select port and press `edit (number of ports) ports` button:
[[File:Networking_tswos_manual_ports_ports_settings_port_settings_edit_{{{poe}}}.png|border|class=tlt-border]]
You will be redirected to `Port settings`. From here you can enable/disable ports or change settings:
[[File:Networking_tswos_manual_ports_ports_settings_port_settings_settings_{{{poe}}}.png|border|class=tlt-border]]
Field | Value | Description |
---|---|---|
Enable | off | on; default: on | Toggle port on or off. |
EEE | off | on; default: on | Enable Energy-Efficient Ethernet. |
Isolate port | off | on; default: off | When enabled port will be isolated from other isolated ports. Traffic between isolated ports will droped. Traffic between isolated and normal ports will be sent as normal. |
Link speed | Auto | 10Mbps (E) | 100Mbps (FE) | 1000Mbps (GbE); default: Auto | A measure of how fast ports are able to transmit and receive data. |
Duplex | Full | Half; default: | Advertises preferred duplex mode and speed for negotiation with other devices. |
Port Status
This section displays port status information. There is also an option to select, enable ports, enable/disable PoE, EEE and Isolation options:
[[File:Networking_tswos_manual_ports_ports_settings_port_status_{{{poe}}}.png|border|class=tlt-border]]
Field Name | Description |
---|---|
Port | Port ID. |
Enabled | Enable/Disable port. |
Status | Port status. |
Speed | Port link speed.
|
PoE (W) | PoE port power usage in watts. |
EEE | Enable/Disable Energy-Efficient Ethernet. |
Isolation | When enabled port will be isolated from other isolated ports. Traffic between isolated ports will be droped. Traffic between isolated and normal ports will be sent as normal. |
TX sum | Total upload. |
RX sum | Total download. |
TX rate | Upload speed. |
RX rate | Download speed. |
Port Mirroring
Port Mirroring is a service that mirrors incoming and outgoing packets on one Ethernet port (Source Port) to another (Monitoring Port).
To change port mirroring settings select port and press `Edit` button:
You will be redirected to `Port mirroring settings`, from here you can select ingress and egress ports:
Field | Value | Description |
---|---|---|
Enable | off | on; default: off | The port which will mirror the packets. |
Ingress mirroring port list | port; default: none | Specify which port incoming traffic is mirrored. |
Egress mirroring port list | port; default: none | Specify which port outcoming traffic is mirrored. |
Loopback Detection
Loopback Detection
A port-based loopback detection service that using its own distinctive packets, seeks to identify and break a network loop by shutting down troublesome ports.
Field | Value | Description |
---|---|---|
Enable | off | on; default: off | Enable loopback detection. |
Broadcast interval | integer [1..10000]; default: none | Send detection packets in an given interval from 1 to 10000 seconds. |
Auto-recovery interval | integer [60..10000]; default: none | Restores disabled ports in an given interval from 60 to 10000 seconds. |
Port Tracking
Tracks specific port status. Notes:
To change port tracking setting press on port and you will be redirected to `Port tracking configuration`:
Field | Value | Description |
---|---|---|
Enable | off | on; default: on | Enable port tracking. |
Recovery mode | Auto | Manual; default: Auto | Manages port unblocking type.Possible modes:
|
Port Security
This section displays information about the status of the device's ports with the ability to configure port security settings.
General
Port Settings
The figure below is an example of the Port Settings window, color indicates port speed and status:
[[File:Networking_tswos_manual_ports_port_security_port_settings_{{{poe}}}.png|border|class=tlt-border]]
To change port security settings select port and press `edit (number of ports) ports` button:
[[File:Networking_tswos_manual_ports_port_security_port_settings_edit_{{{poe}}}.png|border|class=tlt-border]]
You will be redirected to `Port security settings`. From here you can enable/disable ports or change security settings:
Field | Value | Description |
---|---|---|
Enable | off | on; default: off | Enable security for port. |
Radius sever | radius server ID; default: example | Radius server ID. |
Radius unreachable action | Accept | Reject; default: Accept | "Accept" gives anyone access to the port when the radius server is unreachable. "Reject" only unblocks the port if radius server explicitly authorizes it. |
Fallback VLAN | Disabled | VLAN; default: Disabled | Indicates fallback VLAN |
Reject VLAN | Disabled | VLAN; default: Disabled | Indicates reject VLAN |
Accept VLAN | Radius assigned | vlan1(ID: 1); default: vlan1(ID: 1) | Indicates accept VLAN |
Port Status
This section displays port status information. There is also an option to select, enable ports security, choose RADIUS server and change RADIUS unreachable action:
Field Name | Description |
---|---|
Port | Port ID. |
Enabled | Enables port security on this port. |
Status | Port status. |
Radius server | Authenticates and authorizes devices trying to connect to this port. |
Radius unreachable action | "Accept" gives anyone access to the port when the radius server is unreachable. "Reject" only unblocks the port if radius server explicitly authorizes it. |
RADIUS
The RADIUS page is used to create and manage radius servers:
Field Name | Description |
---|---|
ID | RADIUS server ID. |
Address (IPv4) | RADIUS server IP. |
Authentication port | RADIUS server athentication port. |
Secret | RADIUS server secret. |
Radius Configuration
The RADIUS configuration window should look similar to this:
[[Category:{{{name}}} Network section]]Field | Value | Description |
---|---|---|
Address (IPv4/IPv6) | ip; default: 0.0.0.0 | RADIUS server IP. |
Authentication port | interger [1.. 65535]; default: 1812 | RADIUS server athentication port. |
Secret | string; default: - | RADIUS server secret. |
Test connectivity | -(interactive) button | Test connectivity to RADIUS server. |
Test user credentials | -(interactive) button | Test credentials to RADIUS server. |
Enable backup RADIUS server | off | on; default: off | Enable backup RADIUS server. |
Address (IPv4/IPv6) | ip; default: none | Backup RADIUS server IP. |
Authentication port | interger [1.. 65535]; default: none | Backup RADIUS server athentication port. |
Secret | string; default: - | Backup RADIUS server secret. |
Test connectivity | -(interactive) button | Test connectivity to backup RADIUS server. |
Test user credentials | -(interactive) button | Test credentials to backup RADIUS server. |