1,439
edits
Changes
no edit summary
OTD140 outdoor router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
OTD140 outdoor router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
=== PoE standards ===
This device uses PoE alternative B.
===The difference between PoE alternative A and alternative B===
'''Alternative A:'''
802.3af and 802.3at Alternative A connection. The power sourcing equipment applies a positive voltage to pins 1-2 and a negative voltage to pins 3-6.
{{Template: Alternative_A_Table}}
'''Alternative B:'''
802.3af and 802.3at Alternative B connection. The power sourcing equipment applies a positive voltage to pins 4-5 and a negative voltage to pins 7-8.
{{Template: Alternative_B_Table}}
{{Template: Alternative_B_Table}}
* You alone are responsible for how you use your device and any consequences related to its use.
* You alone are responsible for how you use your device and any consequences related to its use.
* Use of your device is subject to safety measures designed to protect users and their environment.
* Use of your device is subject to safety measures designed to protect users and their environment.
* Always treat your device and its accessories with care and keep it in a clean and dust-free place.
* Always treat your device and its accessories with care.
* Do not expose your device or its accessories to open flames, lit tobacco products, liquid, moisture, or high humidity.
* Do not expose your device or its accessories to open flames, lit tobacco products, liquid, or high humidity.
* Do not drop, throw or try to bend your device or its accessories.
* Do not drop, throw or try to bend your device or its accessories.
* Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories.
* Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories.
* Do not operate the device where ventilation is restricted.
* Do not operate the device where ventilation is restricted.
* Do not use or install this product near water to avoid fire or shock hazards.
* Do not use or install this product near water to avoid fire or shock hazards.
* Arrange power and Ethernet cables so that they are not likely to be stepped on or have items placed on them.
* Arrange power and Ethernet cables so that they are not likely to be stepped on or have items placed on them.
* Ensure that the voltage and the rated current of the power source match the device’s requirements. Do not connect the device to an inappropriate power source.
* Ensure that the voltage and the rated current of the power source match the device’s requirements. Do not connect the device to an inappropriate power source.
| name = OTD140
| name = OTD140
}}
}}
== Mounting instruction ==
=== Wall Mounting ===
<table>
<tr>
<td style="vertical-align: top; margin: 10px; padding-bottom: 0px; padding-right: 50px;"> 1. The tools and fasteners required for installing the OTD140 depend on the type of wall surface and the chosen fasteners. To secure the OTD140's's housing onto the bracket, you will need a screwdriver, ideally one with a PZ2 nozzle. [[File:OTD140_Wall_Installation_steps_1_v1.png|center|400px|link=Special:FilePath/OTD140_Wall_Installation_steps_1_v1.png]]</td>
<td style="vertical-align: top; margin: 0px; padding-left: 0px; padding-bottom: 5px;"> 2. Remove the bottom part of the OTD140's and remove the bracket by unscrewing the screws.[[File:OTD140_Wall_Installation_steps_2_v1.png|center|400px|link=Special:FilePath/OTD140_Wall_Installation_steps_2_v1.png]]</td>
</tr>
<tr>
<td style="vertical-align: top; margin: 10px; padding-bottom: 25px; padding-right: 50px;"> 3. The bracket should be attached to the wall using screws fitting for the type of wall surface. The diameter of the holes should be 4.8 mm, or about 0.19 inches.
[[File:OTD140_Wall_Installation_steps_3_v1.png|center|400px|link=Special:FilePath/OTD140_Wall_Installation_steps_3_v1.png]]</td>
<td style="vertical-align: top; margin: 0px; padding-left: 0px; padding-bottom: 5px;"> 4. Align the OTD140 with the bracket and press it downward until the OTD140's housing is locked into place on the bracket. This locking should close a gap of about 10 mm, or 0.39 inches.[[File:OTD140_Wall_Installation_steps_4_v1.png|center|400px|link=Special:FilePath/OTD140_Wall_Installation_steps_4_v1.png]]</td>
</tr>
<tr>
<td style="vertical-align: top; margin: 10px; padding-bottom: 25px; padding-right: 50px;"> 5. Insert and tighten the screw provided in the kit to secure the locked housing to the bracket.
[[File:OTD140_Wall_Installation_steps_5_v1.png|center|400px|link=Special:FilePath/OTD140_Wall_Installation_steps_5_v1.png]]</td>
<td style="vertical-align: top; margin: 0px; padding-left: 0px; padding-bottom: 5px;"> 6. Finally, attach the bottom part of the OTD140's housing to the bottom of the mounted router.[[File:OTD140_Wall_Installation_steps_6_v1.png|center|400px|link=Special:FilePath/OTD140_Wall_Installation_steps_6_v1.png]]</td>
</tr>
</table>
=== Pole Mounting ===
<table>
<tr>
<td style="vertical-align: top; margin: 10px; padding-bottom: 0px; padding-right: 50px;"> 1. It is recommended to install the OTD on a pole at least 45 mm, or about 1.77 inches, in diameter. Ensure the chosen pole can support the weight of the product, which is 855 g. and you will need a screwdriver, ideally one with a PZ2 nozzle. [[File:OTD140_Pole_Installation_steps_1_v1.png|center|400px|link=Special:FilePath/OTD140_Pole_Installation_steps_1_v1.png]]</td>
<td style="vertical-align: top; margin: 0px; padding-left: 0px; padding-bottom: 5px;"> 2. Remove the bottom part of the OTD140's and remove the bracket by unscrewing the screws. [[File:OTD140_Pole_Installation_steps_2_v1.png|center|400px|link=Special:FilePath/OTD140_Pole_Installation_steps_2_v1.png]]</td>
</tr>
<tr>
<td style="vertical-align: top; margin: 10px; padding-bottom: 25px; padding-right: 50px;"> 3. Select any of the bracket's holes to fit the width of the fastener, either a plastic zipper or a metal lintel. For plastic zippers, the diameter of the holes should be 4.8 mm, or about 0.31 inches. For metal lintel, it should be 8 mm, or about 0.31 inches. Note that product kit does not include any fasteners.
[[File:OTD140_Pole_Installation_steps_3_v1.png|center|400px|link=Special:FilePath/OTD140_Pole_Installation_steps_3_v1.png]]</td>
<td style="vertical-align: top; margin: 0px; padding-left: 0px; padding-bottom: 5px;"> 4. Align the OTD140 with the bracket and press it downward until the OTD140's housing is locked into place on the bracket. This locking should close a gap of about 10 mm, or 0.39 inches. [[File:OTD140_Pole_Installation_steps_4_v1.png|center|400px|link=Special:FilePath/OTD140_Pole_Installation_steps_4_v1.png]]</td>
</tr>
<tr>
<td style="vertical-align: top; margin: 10px; padding-bottom: 25px; padding-right: 50px;"> 5. Insert and tighten the screw provided in the kit to secure the locked housing to the bracket.
[[File:OTD140_Pole_Installation_steps_5_v1.png|center|400px|link=Special:FilePath/OTD140_Pole_Installation_steps_5_v1.png]]</td>
<td style="vertical-align: top; margin: 0px; padding-left: 0px; padding-bottom: 5px;"> 6. Finally, attach the bottom part of the OTD140's housing to the bottom of the mounted router. [[File:OTD140_Pole_Installation_steps_6_v1.png|center|400px|link=Special:FilePath/OTD140_Pole_Installation_steps_6_v1.png]]</td>
</tr>
</table>
== Login to device ==
== Login to device ==