Changes

|<td>  

|<td>  

<p> #!/bin/sh </p>

<p> #!/bin/sh </p>

<p> ./lib/functions/network.sh </p>

<p> source /lib/functions/network.sh </p>

<p> network_flush_cache </p>

<p> network_flush_cache </p>

<p> network_find_wan6 NET_IF6 </p>

<p> network_find_wan6 NET_IF6 </p>

* Switch the '''Enable''' toggle to the on position.

* Switch the '''Enable''' toggle to the on position.

* Switch the '''Use HTTP Secure''' toggle to the on position. '''(Optional)'''.

* Switch the '''Use HTTP Secure''' toggle to the on position. '''(Optional)'''.

* At  '''Lookup Hostname''' and '''Domain'''introduce the no-ip.com hostname previously created. '''(They all must match)'''.

* At  '''Lookup Hostname''' and '''Domain''' introduce the noip.com '''Hostname''' previously created. '''(All of them must match)'''.

* Choose no-ip.com as '''DDNS Service Provider'''.

* Choose '''no-ip.com''' as '''DDNS Service Provider'''.

* Type in the credentials used to create your no-ip.com account.

* Type in the credentials used to create your noip.com account.

* Select '''Script''' as the '''Ip address Source'''.

* Select '''Script''' as the '''Ip address Source'''.

* At '''Event Network''', select the interface where the ipv6 address is enabled.  

* At '''Event Network''', select the interface where the ipv6 address is enabled.