|
|
(14 intermediate revisions by the same user not shown) |
Line 6: |
Line 6: |
| | | |
| ==Changelog== | | ==Changelog== |
− | <!--NEW_FW-->
| + | |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.10/RUTM/RUTM_R_00.07.10_WEBUI.bin RUTM_R_00.07.10]</span></b> | 2024.10.10===
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** NAT64: added "jool" package for NAT64 support
| |
− | ** <b>Services</b>
| |
− | *** AWS IoT Core: added service
| |
− | *** BACnet: added ability to configure several BIP interfaces, to set network numbers and preconfigure BDT entries for BBMD
| |
− | *** Console: added service status information display
| |
− | *** DLMS: added service status information display
| |
− | *** DNP3 Client: added service status information display
| |
− | *** DNP3 Outstation: added service status information display
| |
− | *** Modbus Client: added service status information display
| |
− | *** Modbus Server: added service status information display
| |
− | *** Modbus TCP over Serial Gateway: added service status information display
| |
− | *** MQTT Modbus Gateway: added service status information display
| |
− | *** NTRIP: added service status information display
| |
− | *** OPC UA Client: added service status information display
| |
− | *** OPC UA Server: added variable "rut_wan_type" which shows if WAN is on a wired or a mobile network
| |
− | *** OPC UA Server: added service status information display
| |
− | *** RMS: added SOCKS5 proxy support
| |
− | ** <b>System</b>
| |
− | *** Certificates: added SCEP certificate generation method
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Curl: added unix socket support
| |
− | *** Firewall: added most options to basic mode for all firewall pages
| |
− | *** Firewall: added all firewall pages to basic mode
| |
− | *** Interfaces: increased interface metric maximum value from 10000 to 4294967295
| |
− | *** Multi WAN: added rules table to basic mode
| |
− | *** Network: improved performance under stateless single-directional traffic (RFC2544)
| |
− | *** Network: improved throughput stability of "Hardware flow offloading"
| |
− | *** Static Routes: added page to basic mode
| |
− | *** VRRP: added page to basic mode
| |
− | ** <b>Services</b>
| |
− | *** DLMS: added meter COSEM object scanning
| |
− | *** DNP3 Client: made menu names more consistent
| |
− | *** IPsec: improved 'Remote endpoint' validation to allow '%any', '%any4', '%any6' values and netmask
| |
− | *** IPsec: added ability to use certificates from Certificate Manager
| |
− | *** L2TPv3: added Tunnel ID and Session ID validation to avoid creating multiple tunnels with the same parameters
| |
− | *** Modbus Client: updated Modbus Client menu position
| |
− | *** Modbus Server: updated Modbus Server menu position
| |
− | *** Python3: changed python3-light package libraries
| |
− | *** Tailscale: improved status information by including health messages
| |
− | *** Tinc: added options to set the tunnel's IP address
| |
− | *** Tinc: added a port option to listen for incoming connections and the ability to specify a port for outgoing connections
| |
− | *** Wireguard: added tunnel source mode selection
| |
− | *** Python3: updated version to 3.11.7
| |
− | *** Strongswan: updated version to 5.9.14
| |
− | *** Tailscale: updated version to 1.70.0
| |
− | ** <b>System</b>
| |
− | *** Access Control: refactored 'General', 'Security' and 'PAM' Web pages
| |
− | *** Auto Reboot: added support for multiple hosts/URLs in Ping/Wget Reboot
| |
− | *** Backup: encrypting backup does not require 7zip package anymore
| |
− | *** Certificates: split "Let's Encrypt" certificates into multiple files
| |
− | *** Troubleshoot: added dynamic routes debugging information
| |
− | *** WebUI: added ability to open new page in new tab without entering user credentials
| |
− | *** WebUI: improved SDK example application
| |
− | *** Glib2: updated version to 2.80.5
| |
− | *** Kernel: updated version to 5.10.224
| |
− | *** Ncurses: updated version to 6.5
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Firewall: fixed automatic priority option change
| |
− | *** Network: fixed MTU change of WAN interface
| |
− | ** <b>Services</b>
| |
− | *** BACnet: fixed communication issues between the ports
| |
− | *** BACnet: added all available default baud rates
| |
− | *** BGP: fixed AS field to allow duplicate values
| |
− | *** BGP: fixed Access list filters not applying fully
| |
− | *** DLMS: added all available default baud rates
| |
− | *** DMVPN: fixed DMVPN GRE instance disappearing when creating new IPsec instance
| |
− | *** DNP3 Client: removed unnecessary max length display for test response field
| |
− | *** DNP3 Client: renamed TCP Station to TCP Client in the API documentation
| |
− | *** DNP3 Client: added all available default baud rates
| |
− | *** DNP3 Outstation: added all available default baud rates
| |
− | *** GRE: fixed interface not showing up in OSPF and RIP selections if it is off
| |
− | *** IPsec: fixed IP rule not appearing after network restart
| |
− | *** IPsec: fixed duplicate port values in IPsec firewall rules
| |
− | *** Ledman: fixed issue when power LED turns off when rebooting device
| |
− | *** Modbus Client: added all available default baud rates
| |
− | *** Modbus Client: added missing API docs for Modbus test request
| |
− | *** Modbus Server: added all available default baud rates
| |
− | *** Modbus Server: fixed firewall rule staying enabled when app is disabled
| |
− | *** Modbus Server: fixed firewall rule creation
| |
− | *** NTRIP: added all available default baud rates
| |
− | *** OpenVPN: fixed the configuration after disabling the use of external services
| |
− | *** Over IP: added all available default baud rates
| |
− | *** SNMP: fixed Hotspot OIDs' hssID and hssUsername display
| |
− | *** Tinc: fixed adding routes to remote subnets
| |
− | *** Tinc: fixed configuration generation issues when creating multiple network and host instances
| |
− | *** Tinc: fixed issues with route creation when using IPv6 addresses in tunnel configuration
| |
− | *** Tinc: fixed validation for uploading key files
| |
− | ** <b>System</b>
| |
− | *** Backup: fixed uploading backup with memory expansion enabled
| |
− | *** CLI: fixed some private IPs being incorrectly determined as public
| |
− | *** JSON-RPC: fixed login "Access Denied" error
| |
− | *** Memory Expansion: fixed input element alignment issues
| |
− | *** WebUI: added API required values validation when enabling BACnet, DLMS, DNP3, Modbus, MQTT, NTRIP services
| |
− | *** WebUI: fixed 'Memory' status card progress bars visuals
| |
− | *** WebUI: fixed search bar suggestions after removing packages
| |
− | *** WebUI: fixed showing data in modals for users with only read permissions
| |
− | *** WebUI: fixed custom SDK pages not loading correctly
| |
− | * <b>CVE Patches</b>
| |
− | ** CVE-2021-3520
| |
− | ** CVE-2021-44540
| |
− | ** CVE-2021-44541
| |
− | ** CVE-2024-4032
| |
− | ** CVE-2024-6119
| |
− | ** CVE-2024-6232
| |
− | ** CVE-2024-6923
| |
− | ** CVE-2024-7264
| |
− | ** CVE-2024-42225
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.4/RUTM/RUTM_R_00.07.09.4_WEBUI.bin RUTM_R_00.07.09.4]</span></b> | 2024.10.02===
| |
− | * <b>Improvements</b>
| |
− | ** <b>Services</b>
| |
− | *** NTP Client: changed default NTP servers
| |
− | * <b>Fix</b>
| |
− | ** <b>Services</b>
| |
− | *** NTP Client: fixed NTP server usage to work with next in line server if current server does not respond
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.3/RUTM/RUTM_R_00.07.09.3_WEBUI.bin RUTM_R_00.07.09.3]</span></b> | 2024.09.27===
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Multi WAN: fixed ipsets not getting deleted correctly when Multi WAN gets restarted
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.2/RUTM/RUTM_R_00.07.09.2_WEBUI.bin RUTM_R_00.07.09.2]</span></b> | 2024.09.16===
| |
− | * Changes only affect RUTM50 device
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.1/RUTM/RUTM_R_00.07.09.1_WEBUI.bin RUTM_R_00.07.09.1]</span></b> | 2024.09.13===
| |
− | * <b>Improvements</b>
| |
− | ** <b>Services</b>
| |
− | *** Python3: updated version to 3.11.7
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9/RUTM/RUTM_R_00.07.09_WEBUI.bin RUTM_R_00.07.09]</span></b> | 2024.09.03===
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** Devices: added VXLAN support
| |
− | *** Firewall: added ability to configure NAT rule action
| |
− | *** Firewall: added additional TTL target for firewall rules
| |
− | *** Realtime Traffic: added historical traffic charts
| |
− | ** <b>Services</b>
| |
− | *** Events Reporting: added new firmware version notification event
| |
− | *** SNMP: added Multiwan data module
| |
− | ** <b>System</b>
| |
− | *** WebUI: added notifications menu
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Ports Settings: added more PoE state symbols, colored disabled port differently and improved port status hint
| |
− | *** Realtime Traffic: improved chart styles
| |
− | ** <b>Services</b>
| |
− | *** Data to Server: added warning messages about insecure certificates for http_certfile and mqtt_certfile options in API and WebUI
| |
− | *** DLMS: added SHA256 authentication
| |
− | *** DLMS: improved COSEM group enable validation
| |
− | *** GRE: reduced GRE keepalive packet buffer size
| |
− | *** IPsec: added support for route based tunnel
| |
− | *** L2TP: added field for custom options
| |
− | *** SMPP: added timeout option
| |
− | *** Web Filter: added hostname count message after successful file upload
| |
− | ** <b>System</b>
| |
− | *** Access Control: improved system user's access control rules logic
| |
− | *** Access Control: added option to disable password auth for the root user
| |
− | *** Administration: improved write/read access control options display to match meniu path style
| |
− | *** Backup: improved backup page by splitting it into backup and reset settings page
| |
− | *** Boot: added NAND image verification after firmware flash
| |
− | *** Side Widget: added port status widget
| |
− | *** Update Firmware: changed firmware update log to include firmware version
| |
− | *** WebUI: updated firmware and backup verification pages design
| |
− | *** WebUI: improved global alerts display
| |
− | *** WebUI: added confirmation prompt for disabling service in side widget
| |
− | *** Kernel: updated version to 5.10.221
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Devices: fixed configured VLAN 0 device cannot be selected in interface physical settings configuration
| |
− | ** <b>Services</b>
| |
− | *** Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint to create Data to Server sections
| |
− | *** Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint so that it does not create sections in GET request
| |
− | *** Azure IoT Hub: fixed the deletion of Data to Server sections when an Azure IoT Hub section is deleted through the deprecated endpoint
| |
− | *** DLMS: fixed OBIS code validation
| |
− | *** Input/Output: added I/O juggler reload when I/O pin direction is changed
| |
− | *** OPC UA Client: fixed TCL file upload
| |
− | *** OPC UA Server: fixed TCL file upload
| |
− | *** OPC UA Server: fixed configuration migration
| |
− | *** OpenVPN: fixed default firewall zone for tap interfaces
| |
− | *** SNMP: fixed TELTONIKA-MIB wireless module crash
| |
− | *** SNMP: fixed mobile network state display
| |
− | *** SNMP: fixed default hssDwLimit, hssUpLimit, hssDwBandwidth and hssUpBandwidth values
| |
− | ** <b>System</b>
| |
− | *** API Core: fixed file deletion
| |
− | *** Package Restore: fixed automatic package re-installation after firmware upgrade
| |
− | *** Troubleshoot: fixed troubleshoot not including all the log files when log to flash is enabled
| |
− | *** User Settings: fixed page to show groups and users if the user has been granted access
| |
− | *** WebUI: fixed overview page to display active wireless (WLAN) clients
| |
− | * <b>CVE Patches</b>
| |
− | ** CVE-2021-32292
| |
− | ** CVE-2022-40617
| |
− | ** CVE-2023-49441
| |
− | ** CVE-2024-0397
| |
− | ** CVE-2024-3596
| |
− | ** CVE-2024-5535
| |
− | ** CVE-2024-8088
| |
− | ** CVE-2024-26669
| |
− | ** CVE-2024-26739
| |
− | ** CVE-2024-26740
| |
− | ** CVE-2024-36901
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.8.2/RUTM/RUTM_R_00.07.08.2_WEBUI.bin RUTM_R_00.07.08.2]</span></b> | 2024.08.12===
| |
− | * <b>Fix</b>
| |
− | ** <b>System</b>
| |
− | *** Update Firmware: fixed inconsistent firmware download from FOTA
| |
− | ----
| |
− | ===<b>RUTM_R_00.07.08.1</b> | 2024.08.06===
| |
− | <b>Note:</b> This firmware version was removed due to an issue with FOTA firmware download.
| |
− | * <b>Improvements</b>
| |
− | ** <b>Services</b>
| |
− | *** Zerotier: updated version to 1.14.0
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Network: fixed default route not being added for PPPoE connections
| |
− | ** <b>Services</b>
| |
− | *** Modbus TCP over Serial Gateway: fixed serial connection not working after reboot
| |
− | *** OPC UA Client: fixed connections not being closed after using testing functionality
| |
− | ** <b>System</b>
| |
− | *** WebUI: fixed SDK WebUI package compilation
| |
− | ----
| |
− | ===<b>RUTM_R_00.07.08</b> | 2024.07.18===
| |
− | <b>Note:</b> This firmware version was removed due to an issue with FOTA firmware download.
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** 802.1X: added client support
| |
− | *** DNS: added inherited server status to configuration page
| |
− | *** HTTPS DNS Proxy: added new HTTPS DNS Proxy package to package manager
| |
− | ** <b>Services</b>
| |
− | *** Data to Server: added 'Lua script' data input
| |
− | *** Input/Output: added ability to configure gpio debounce timer and changed default gpio debounce timer value from 200 ms to 10 ms
| |
− | *** IPsec: added initial XFRM support
| |
− | *** MQTT Modbus Gateway: added JSON message type format
| |
− | *** OpenVPN: added DCO support
| |
− | ** <b>System</b>
| |
− | *** API Core: added option to configure api session timeout
| |
− | *** Certificates: added "Let's encrypt" certificate generation
| |
− | *** PAM: added RADIUS external user support
| |
− | *** UI Core: added data analytics support
| |
− | *** Update Firmware: added warning message about device being temporarily unreachable on firmware update
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** DNS: separated field "DNS forwardings" into two: one for simple server forwarding other for domain-specific
| |
− | *** DNS: moved "DNS Forwardings", "Listen interfaces", "Exclude interfaces", "Local service only", options to advanced tab
| |
− | *** Firewall: improved protocol field in all firewall pages by making that "All" value would be mutually exclusive with any other value
| |
− | *** Multi WAN: improved interface status representation when using load balancing
| |
− | *** Network: added more options for "IPv6 assignment length" field
| |
− | ** <b>Services</b>
| |
− | *** Azure IoT Hub: added DPS symmetric key attestation support
| |
− | *** Azure IoT Hub: added Direct Method support
| |
− | *** Azure IoT Hub: added Plug and Play integration
| |
− | *** Azure IoT Hub: added link to "Data to Server" page
| |
− | *** Data to Server: added support for multiple filters
| |
− | *** Data to Server: improved HTTP output hostname definition with automatic protocol specification in URL
| |
− | *** Data to Server: improved MQTT input connection handling
| |
− | *** DNP3 Client: added option to enable/disable service
| |
− | *** GRE: increased Inbound and Outbound key limit to 4294967295
| |
− | *** Input/Output: added custom name support in I/O status page
| |
− | *** IPsec: added certificate warning message
| |
− | *** Modbus Server: added mobile last month and last week usage registers
| |
− | *** Mosquitto: added large package size check for MQTT clients
| |
− | *** MQTT Modbus Gateway: improved mosquitto reconnect time and service will try to recover few times before exiting
| |
− | *** MQTT Publisher: improved MQTT connection handling
| |
− | *** OPC UA Client: added security modes
| |
− | *** OPC UA Server: added security modes
| |
− | *** OPC UA Server: added service status display
| |
− | *** OpenVPN: added support for decrypting private key when uploading a configuration file
| |
− | *** OpenVPN: improved instance status state
| |
− | *** OpenVPN: added options to specify an IP address pool for dynamic assignment to clients
| |
− | *** Over IP: added label to show how many servers a client is connected to
| |
− | *** Over IP: connect on data feature will not disconnect immediately after data transfer but wait for inactivity timeout
| |
− | *** Over IP: increased TLS handshake timeout to 10 seconds
| |
− | *** SMPP: added brute-force prevention
| |
− | *** SMPP: added TLS/SSL support
| |
− | *** SNMP: changed interface module OID structure
| |
− | *** SNMP: improved User-based Security Model (USM) brute force attack prevention measures
| |
− | *** Stunnel: improved global instance settings dependencies
| |
− | *** emailrelay: updated version to 2.4.1
| |
− | *** OpenVPN: updated version to 2.6.9
| |
− | *** stunnel: updated version to 5.72
| |
− | *** Tailscale: updated version to 1.68.1
| |
− | ** <b>System</b>
| |
− | *** Access Control: added certificate key length warnings
| |
− | *** Access Control: adjusted access control when all pages are blocked
| |
− | *** Access Control: added certificate file download for CLI to work on all browsers
| |
− | *** API Core: implemented functionality to include warning messages for vulnerable certificates
| |
− | *** Boot: enabled HW watchdog in bootloader
| |
− | *** Package Manager: added multi package actions
| |
− | *** Package Manager: added status filter
| |
− | *** Package Manager: moved package upload action to main page
| |
− | *** Package Manager: added links to installed packages pages
| |
− | *** Package Manager: refactored "Packages" page
| |
− | *** Package Manager: updated opkg repository link to use https
| |
− | *** RutOS: improved GPL example page to align with new software architecture
| |
− | *** Troubleshoot: added support for multiple syslog servers
| |
− | *** UI Core: added additional message with IP address to loading screen for scenarios when redirect to different IP address happens
| |
− | *** UI Core: added toast message hiding when text is too long
| |
− | *** Update Firmware: added 'Firmware version' data in screen after firmware upload
| |
− | *** WebUI: added functionality to cancel loading screen if it takes 30 or more seconds
| |
− | *** WebUI: removed all ubus method calls from webui
| |
− | *** WebUI: improved language caching
| |
− | *** WebUI: added password generator for first login modal
| |
− | *** WebUI: added sticky position to side menu
| |
− | *** WebUI: added default password hint to login error message
| |
− | *** WebUI: added warning messages for low-security certificates
| |
− | *** Kernel: updated version to 5.10.217
| |
− | *** libexpat: updated version to 2.6.2
| |
− | *** SSL/TLS: updated version to 3.0.14
| |
− | *** vue: updated version to 3.4
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Devices: fixed missing API devices status endpoint permission
| |
− | *** DHCP: fixed "DHCP option" allow empty input value
| |
− | *** DHCP: fixed IPv4 leases being not correctly shown when NTP synchronizes time
| |
− | *** DHCP: fixed DHCP error that occurred after changing the subnet of the LAN IP address in the setup wizard
| |
− | *** Dynamic routes: fixed duplicated external routes cards
| |
− | *** Firewall: fixed firewall zone validation when adding interfaces
| |
− | *** Network: fixed overriding MAC address for interfaces that are bridged
| |
− | ** <b>Services</b>
| |
− | *** BACnet: fixed incorrect BACnet IP port used for sending responses
| |
− | *** BGP: fixed route map sequence going out of range
| |
− | *** BGP: fixed listen range field allowing multiple entries
| |
− | *** DLMS: fixed DLMS test response format
| |
− | *** DLMS: fixed COSEM group validation
| |
− | *** DLMS: fixed API POST error for /dlms/devices/config endpoint
| |
− | *** DLMS: fixed serial connection not working after reboot
| |
− | *** DNP3 Client: fixed to allow reading objects past 255 index
| |
− | *** DNP3 Client: fixed incorrect hints
| |
− | *** DNP3 Outstation: fixed serial outstation starting issues
| |
− | *** I/O Juggler: fixed improper dout action config handling
| |
− | *** I/O Juggler: updated profile change action
| |
− | *** Input/Output: allow unselecting all Post/Get access methods
| |
− | *** IPsec: fixed connectivity issues when using WAN failover
| |
− | *** IPsec: fixed the instance status when the local firewall option is disabled
| |
− | *** Modbus Client: fixed test request option validation
| |
− | *** Modbus Client: fixed alarm output action display values
| |
− | *** Modbus Client: fixed incorrect period hint
| |
− | *** Modbus Server: fixed APN register not clearing APN
| |
− | *** Modbus Server: fixed 148 and 164 modbus registers
| |
− | *** Modbus Server: fixed incorrect hints
| |
− | *** NTRIP: fixed NTRIP NMEA generation timestamp and coordinates errors
| |
− | *** NTRIP: fixed configuration reading with several instances added
| |
− | *** OPC UA Server: fixed not starting while modem is down
| |
− | *** OpenVPN: fixed displaying imported files from device
| |
− | *** OpenVPN: fixed the private key decryption for cases when a password is used
| |
− | *** OpenVPN: fixed data cipher migration
| |
− | *** Over IP: fixed connect on data initiating TCP connection after few data transfers
| |
− | *** Overview: fixed issue when devices without WiFi send additional request without data
| |
− | *** SMPP: fixed username bypass problem
| |
− | *** SMPP: fixed password validation
| |
− | *** SNMP: fixed GSM mSignal OID value type
| |
− | *** SNMP: fixed GSM module memory leaks
| |
− | *** SSTP: fixed functionality when the default route option is not enabled
| |
− | *** Web Filter: fixed whitelist not working for some hosts when using IPv6
| |
− | ** <b>System</b>
| |
− | *** Administration: fixed repeated validation on cleared inputs and added validation when new password matches the old one
| |
− | *** API Core: fixed API method validation during upload action
| |
− | *** API Core: fixed error messages for POST method
| |
− | *** API Core: fixed option list validation
| |
− | *** Boot: fixed factory settings restore (firstboot) not deleting hidden files
| |
− | *** Events Log: fixed refresh button in event log table
| |
− | *** IP Block: fixed adding MAC addresses back to whitelist when unblocking all of them
| |
− | *** Memory Expansion: fixed enable validation
| |
− | *** Recipients: made phone number field required
| |
− | *** Setup Wizard: fixed lan ip step not changing ip address
| |
− | *** Troubleshoot: fixed system log and kernel log buttons to be enabled with read only rights
| |
− | *** Update Firmware: fixed misleading "Firmware version" status of "N/A" to "FOTA service is disabled" when FOTA is disabled
| |
− | *** Update Firmware: fixed issue when infinite spinner appears after updating device firmware from server without having internet connection
| |
− | * <b>CVE Patches</b>
| |
− | ** Patched CVE-2023-52425
| |
− | ** Patched CVE-2023-52530
| |
− | ** Patched CVE-2024-25629
| |
− | ** Patched CVE-2024-28757
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.3/RUTM/RUTM_R_00.07.07.3_WEBUI.bin RUTM_R_00.07.07.3]</span></b> | 2024.06.25===
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** WebUI: fixed port advertisement change
| |
− | ** <b>System</b>
| |
− | *** FOTA: fixed config when upgrading from older firmware with keep settings
| |
− | * <b>CVE Patches</b>
| |
− | ** CVE-2024-31950
| |
− | ** CVE-2024-31951
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.2/RUTM/RUTM_R_00.07.07.2_WEBUI.bin RUTM_R_00.07.07.2]</span></b> | 2024.06.12===
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Zerotier: added backup WAN interface blacklisting if WAN failover is enabled
| |
− | ** <b>Services</b>
| |
− | *** SNMP: added bruteforce attack prevention when using SNMP v3 user
| |
− | *** L2TP: improved reconnect attempt logic
| |
− | ** <b>System</b>
| |
− | *** SSH: removed weak SSH algorithms
| |
− | *** Telnet: moved to Package Manager
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** BGP: fixed instance migration issues
| |
− | ** <b>Services</b>
| |
− | *** DMVPN: fixed duplicate NHRP map entries creation
| |
− | *** OpenVPN: added fixes for the insecure tls-cert-profile option usage
| |
− | ** <b>System</b>
| |
− | *** IP Block: fixed blocking of UDP traffic
| |
− | * <b>CVE Patches</b>
| |
− | ** CVE-2024-31948
| |
− | ----
| |
| ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.1/RUTM/RUTM_R_00.07.07.1_WEBUI.bin RUTM_R_00.07.07.1]</span></b> | 2024.05.28=== | | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.1/RUTM/RUTM_R_00.07.07.1_WEBUI.bin RUTM_R_00.07.07.1]</span></b> | 2024.05.28=== |
| | | |
| * <b>New</b> | | * <b>New</b> |
| ** Initial firmware release | | ** Initial firmware release |