Teltonika Networks Wiki

Changes

QSG RUTM11 (view source)

Revision as of 10:56, 11 June 2024

1,324 bytes removed ,  11 June
no edit summary
Line 1: Line 1: −
This Wiki page contains the online version of the '''Quick Start Guide (QSG)''' for the '''RUTM11 Cellular Router'''. Here you will find an overview of the various components on the front and back of a RUTM11 device, hardware installation instructions, first login information, device specifications, and general safety information. It is highly recommended to acquaint yourself with the Quick Start Guide before using the device. You can also locate a printed version of the Quick Start Guide in the packaging box of your device.
+
{{Template: QSG Intro Device
 +
<!------------------------DEVICE----------------------->
 +
| device = RUTM11
 +
| title = Router
 +
}}
    
<table>
 
<table>
Line 5: Line 9:     
   <td style="border-bottom: 0px solid #e8e8e8; vertical-align: top; margin: 10px; padding-right: 50px;">__TOC__</td>         
 
   <td style="border-bottom: 0px solid #e8e8e8; vertical-align: top; margin: 10px; padding-right: 50px;">__TOC__</td>         
−
   <td style="vertical-align: top; margin: 10px; padding-top: 25px; padding-right: 50px;">[[File:RUTM11_D.png|210px|link=Special:FilePath/File:RUTM11_D.png]]</td>
+
   <td style="vertical-align: top; margin: 10px; padding-top: 25px; padding-right: 40px;">[[File:RUTM11_Isometric_View.png|210px|link=Special:FilePath/File:RUTM11_Isometric_View.png]]</td>
−
   <td style="vertical-align: top; margin: 10px; padding-top: 75px; padding-right: 50px;">[[File:RUTM11_F.png|210px|link=Special:FilePath/File:RUTM11_F.png]]</td>
+
   <td style="vertical-align: top; margin: 10px; padding-top: 75px; padding-right: 40px;">[[File:RUTM11_Front_View.png|210px|link=Special:FilePath/File:RUTM11_Front_View.png]]</td>
−
   <td style="vertical-align: top; margin: 10px; padding-top: 75px; padding-right: 50px;">[[File:RUTM11_B.png|210px|link=Special:FilePath/File:RUTM11_B.png]]</td>
+
   <td style="vertical-align: top; margin: 10px; padding-top: 75px; padding-right: 40px;">[[File:RUTM11_Back_View.png|210px|link=Special:FilePath/File:RUTM11_Back_View.png]]</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
   −
==Safety information==
+
= Safety information =
    
Before starting operating the device, please review recommendations and precautions to minimize the possibility of accidents. Safety precautions presented are supplementary and subject to the local safety regulations. When various operations are executed on the device, the user must fully follow the safety instructions and recommendations provided with the device.
 
Before starting operating the device, please review recommendations and precautions to minimize the possibility of accidents. Safety precautions presented are supplementary and subject to the local safety regulations. When various operations are executed on the device, the user must fully follow the safety instructions and recommendations provided with the device.
 
----
 
----
−
=== General ===
+
== General ==
 
{| class="wikitable"
 
{| class="wikitable"
 
|- style="font-weight:bold;"
 
|- style="font-weight:bold;"
Line 51: Line 55:       −
'''CE Declaration of Conformity'''
+
=Compliance=
 +
 
 +
==CE Declaration of Conformity==
    
{| class="wikitable" style="text-align:left;"
 
{| class="wikitable" style="text-align:left;"
Line 128: Line 134:  
|}
 
|}
    +
{{Template: Markings RF function with PSU
 +
<!------------------------DEVICE----------------------->
 +
| device        = RUTM11
 +
}}
   −
Detailed compliance information is available at the following internet address: [https://wiki.teltonika-networks.com/view/Certificates wiki.teltonika-networks.com/view/Certificates].
+
== RF exposure ==
−
 
  −
 
  −
[[Image:Instructions_LOGO.png|50px]] This sign means that is necessary to read the User's Manual before you start using the device.
  −
 
  −
[[Image:WEEE_LOGO.png|50px]] This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.
  −
 
  −
[[File:CE_LOGO.png|50px]]Hereby, TELTONIKA NETWORKS declares that this RUTM11 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://wiki.teltonika-networks.com/view/RUTM11_CE/RED
  −
 
  −
[[Image:UKCA_LOGO.png|50px]] Hereby, TELTONIKA NETWORKS declares that the radio equipment type RUTM11 is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet address: https://wiki.teltonika-networks.com/view/RUTM11_UKCA.
     −
=== RF exposure ===
  −
----
   
This device meets the official requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by authorized agencies. The device must be used with a minimum separation of 20 cm from a person’s body to ensure compliance with RF exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding the applicable limits.
 
This device meets the official requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by authorized agencies. The device must be used with a minimum separation of 20 cm from a person’s body to ensure compliance with RF exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding the applicable limits.
   Line 169: Line 168:  
[[Image:Restrictions_LOGO.png|50px]] In all EU member states, operation of 5150-5350 MHz is restricted to indoor use only.
 
[[Image:Restrictions_LOGO.png|50px]] In all EU member states, operation of 5150-5350 MHz is restricted to indoor use only.
   −
=== Operating conditions ===
+
=Product Safety and Use=
−
----
+
 
 +
==Operating conditions==
 +
 
 
* Operating temperature: -40° to +75° Celsius
 
* Operating temperature: -40° to +75° Celsius
 
* Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry environments.
 
* Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry environments.
Line 178: Line 179:  
'''Attention:''' operation outside the permissible range can considerably shorten the service life of the device.
 
'''Attention:''' operation outside the permissible range can considerably shorten the service life of the device.
   −
=== Faulty and damaged products ===
+
==Faulty and damaged products==
−
----
      
* Do not attempt to disassemble the device or its accessories.
 
* Do not attempt to disassemble the device or its accessories.
Line 185: Line 185:  
* If your device or its accessories have been submerged in water punctured or subjected to a severe fall, do not use until they have been checked at an authorized service center.
 
* If your device or its accessories have been submerged in water punctured or subjected to a severe fall, do not use until they have been checked at an authorized service center.
   −
=== Electrical safety ===
+
==Electrical safety==
−
----
      
* Only use approved accessories.
 
* Only use approved accessories.
Line 192: Line 191:  
* It is recommended to ground devices with grounding terminals before connecting them to power. Failure to ground appropriately might result in a shock hazard. The cross-sectional area of the protective grounding conductor should be at least 1mm2.
 
* It is recommended to ground devices with grounding terminals before connecting them to power. Failure to ground appropriately might result in a shock hazard. The cross-sectional area of the protective grounding conductor should be at least 1mm2.
   −
=== Product handling ===
+
==Product handling==
−
----
      
* You alone are responsible for how you use your device and any consequences related to its use.
 
* You alone are responsible for how you use your device and any consequences related to its use.
Line 218: Line 216:  
* The device may become warm during regular use.
 
* The device may become warm during regular use.
   −
== Front view ==
+
=Quick Start Guide=
 +
 
 +
==Front view==
    
<br>
 
<br>
 
[[File:RUTX11_Front view_Schematics.png|center|800 px|link=Special:FilePath/RUTX11_Front view_Schematics.png]]
 
[[File:RUTX11_Front view_Schematics.png|center|800 px|link=Special:FilePath/RUTX11_Front view_Schematics.png]]
   −
== Back view ==
+
==Back view==
    
<br>
 
<br>
−
[[File:RUTX11_Back view_Schematics.png|center|700 px|link=Special:FilePath/RUTX11_Back view_Schematics.png]]
+
[[File:RUTM11_Back_view_Schematics.png|center|700 px|link=Special:FilePath/RUTM11_Back_view_Schematics.png]]
   −
== Connectors ==
+
==Connectors==
    
<br>
 
<br>
−
'''POWER SOCKET PINOUT'''
+
====Power Socket Pinout====
 +
----
    
<table>
 
<table>
Line 240: Line 241:  
</table>
 
</table>
   −
== Hardware installation ==
+
==Hardware installation==
    
<br>
 
<br>
Line 256: Line 257:  
<tr>
 
<tr>
 
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTX11_Hardware_installation_step_5.png|left|link=Special:FilePath/RUTX11_Hardware_installation_step_5.png]]</td>
 
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTX11_Hardware_installation_step_5.png|left|link=Special:FilePath/RUTX11_Hardware_installation_step_5.png]]</td>
−
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTX11_Hardware_installation_step_6.png|right|link=Special:FilePath/RUTX11_Hardware_installation_step_6.png]]</td>
+
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTM11_Hardware_installation_step_6.png|right|link=Special:FilePath/RUTM11_Hardware_installation_step_6.png]]</td>
 
     </tr>
 
     </tr>
    
<tr>
 
<tr>
−
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTX11_Hardware_installation_step_7.png|left|link=Special:FilePath/RUTX11_Hardware_installation_step_7.png]]</td>
+
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTM11_Hardware_installation_step_7.png|left|link=Special:FilePath/RUTM11_Hardware_installation_step_7.png]]</td>
−
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTX11_Hardware_installation_step_8.png|right|link=Special:FilePath/RUTX11_Hardware_installation_step_8.png]]</td>
+
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTM11_Hardware_installation_step_8.png|right|link=Special:FilePath/RUTM11_Hardware_installation_step_8.png]]</td>
 
     </tr>
 
     </tr>
    
<tr>
 
<tr>
−
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTX11_Hardware_installation_step_9.png|left|link=Special:FilePath/RUTX11_Hardware_installation_step_9.png]]</td>
+
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTX11_Hardware_installation_step_9_temp.png |left|link=Special:FilePath/RUTX11_Hardware_installation_step_9_temp.png]]</td>
 
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTX11_Hardware_installation_step_10.png|right|link=Special:FilePath/RUTX11_Hardware_installation_step_10.png]]</td>
 
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTX11_Hardware_installation_step_10.png|right|link=Special:FilePath/RUTX11_Hardware_installation_step_10.png]]</td>
 
     </tr>
 
     </tr>
Line 286: Line 287:  
}}
 
}}
   −
== Login to device ==
+
==Login to device==
    
<br>
 
<br>
Line 304: Line 305:  
</table>
 
</table>
   −
== SIM card recommendations ==
+
==SIM card recommendations==
    
* Before installing the SIM cards, please apply a thin layer of dielectric grease to the SIM card contacts for devices used in environments with '''high-vibration levels'''. This will help avoid SIM cards losing touch with the SIM slot and prevent unexpected failures.
 
* Before installing the SIM cards, please apply a thin layer of dielectric grease to the SIM card contacts for devices used in environments with '''high-vibration levels'''. This will help avoid SIM cards losing touch with the SIM slot and prevent unexpected failures.
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/125733...126701"