1,076
edits
Changes
no edit summary
{{Template: QSG Intro Device
<!------------------------DEVICE----------------------->
| device = RUT140
| title = Router
}}
<table>
<table>
</table>
</table>
= Safety information =
Before starting operating the device, please review recommendations and precautions to minimize the possibility of accidents. Safety precautions presented are supplementary and subject to the local safety regulations. When various operations are executed on the device, the user must fully follow the safety instructions and recommendations provided with the device.
Before starting operating the device, please review recommendations and precautions to minimize the possibility of accidents. Safety precautions presented are supplementary and subject to the local safety regulations. When various operations are executed on the device, the user must fully follow the safety instructions and recommendations provided with the device.
== General ==
{| class="wikitable"
{| class="wikitable"
|- style="font-weight:bold;"
|- style="font-weight:bold;"
|20 dBm@WiFi
|20 dBm@WiFi
|- style="font-weight:bold;"
|- style="font-weight:bold;"
| colspan="2" style="text-align:center;" | Bundled accessories speci?cations*
| colspan="2" style="text-align:center;" | Bundled accessories specifications*
|-
|-
|WiFi antenna
|WiFi antenna
RUT140 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
RUT140 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
= Compliance =
== CE Declaration of Conformity ==
{| class="wikitable" style="text-align:left;"
{| class="wikitable" style="text-align:left;"
== FCC ==
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
'''FCC Caution:''' Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
'''FCC Caution:''' Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
== ISED Canada ==
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:
# L'appareil doit accepter tout brouillage radioélectrique subi, mzme si le brouillage est.
# L'appareil doit accepter tout brouillage radioélectrique subi, mzme si le brouillage est.
{{Template:Markings_RF_function_without_PSU
<!------------------------DEVICE----------------------->
| device = RUT140
}}
== RF exposure ==
This device meets the official requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by authorized agencies. The device must be used with a minimum separation of 20 cm from a person’s body to ensure compliance with RF exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding the applicable limits.
This device meets the official requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by authorized agencies. The device must be used with a minimum separation of 20 cm from a person’s body to ensure compliance with RF exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding the applicable limits.
{| class="wikitable"
{| class="wikitable"
! colspan="2" |Maximum transmission power
! colspan="2" |Maximum transmission power
|-
|-
|WiFi
|WiFi
|}
|}
'''FCC Radiation Exposure Statement:'''
'''FCC Radiation Exposure Statement:'''
This device complies with the relevant FCC RF radiation exposure limit set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20 cm from all persons.
This device complies with the relevant FCC RF radiation exposure limit set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20 cm from all persons.
'''ISED Canada Radiation Exposure Statement:'''
'''ISED Canada Radiation Exposure Statement:'''
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
=== Operating conditions ===
= Product Safety and Use =
== Operating conditions ==
* Operating temperature: -40° to +75° Celsius
* Operating temperature: -40° to +75° Celsius
* Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry environments.
* Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry environments.
'''Attention:''' operation outside the permissible range can considerably shorten the service life of the device.
'''Attention:''' operation outside the permissible range can considerably shorten the service life of the device.
==Faulty and damaged products==
* Do not attempt to disassemble the device or its accessories.
* Do not attempt to disassemble the device or its accessories.
* If your device or its accessories have been submerged in water punctured or subjected to a severe fall, do not use until they have been checked at an authorized service center.
* If your device or its accessories have been submerged in water punctured or subjected to a severe fall, do not use until they have been checked at an authorized service center.
==Electrical safety==
* Only use approved accessories.
* Only use approved accessories.
* It is recommended to ground devices with grounding terminals before connecting them to power. Failure to ground appropriately might result in a shock hazard. The cross-sectional area of the protective grounding conductor should be at least 1mm2.
* It is recommended to ground devices with grounding terminals before connecting them to power. Failure to ground appropriately might result in a shock hazard. The cross-sectional area of the protective grounding conductor should be at least 1mm2.
==Product handling==
* You alone are responsible for how you use your device and any consequences related to its use.
* You alone are responsible for how you use your device and any consequences related to its use.
* Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories.
* Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories.
* Do not paint your device or its accessories.
* Do not paint your device or its accessories.
* Do not attempt to disassemble your device (exemptions for devices that require disassembly for SIM insertion) or its accessories: it does not contain any user-serviceable parts. For safety reasons, the equipment should be opened only by qualified personnel.
* Do not attempt to disassemble your device or its accessories: it does not contain any user-serviceable parts. For safety reasons, the equipment should be opened only by qualified personnel.
* Make sure to use ESD personal protective equipment while the equipment is serviced.
* Make sure to use ESD personal protective equipment while the equipment is serviced.
* Do not use your device in an enclosed environment where heat dissipation is poor.
* Do not use your device in an enclosed environment where heat dissipation is poor.
* Prolonged use in such space may cause excessive heat and raise ambient temperature, which will lead to the automatic shutdown of your device or the disconnection of the mobile network connection for your safety. To use your device again after such a shutdown, cool it in a well-ventilated place before turning it on.
* Prolonged use in such space may cause excessive heat and raise ambient temperature, which will lead to the automatic shutdown of your device for your safety. To use your device again after such a shutdown, cool it in a well-ventilated place before turning it on.
* Please check all national laws and local regulations for the disposal of electronic products.
* Please check all national laws and local regulations for the disposal of electronic products.
* Do not operate the device where ventilation is restricted.
* Do not operate the device where ventilation is restricted.
* The device may become warm during regular use.
* The device may become warm during regular use.
== Front view ==
=Quick Start Guide=
==Front view==
<br>
<br>
[[File:RUT140 Front view Schematics.PNG|center|800 px|link=Special:FilePath/RUT140 Front view Schematics.PNG]]
[[File:RUT140 Front view Schematics.PNG|center|800 px|link=Special:FilePath/RUT140 Front view Schematics.PNG]]
== Back View ==
==Back View==
<br>
<br>
[[File:RUT140_Back_view_Schematics.PNG|center|800 px|link=Special:FilePath/RUT140_Back_view_Schematics.PNG]]
[[File:RUT140_Back_view_Schematics.PNG|center|800 px|link=Special:FilePath/RUT140_Back_view_Schematics.PNG]]
== Connector ==
== Connectors ==
<br>
<br>
<table>
<table>
<tr>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">1. To enter the router's Web interface (WebUI), type http://192.168.1.1 into the URL field of your Internet browser.<br><br>2. When prompted for authentication enter the username admin and enter the password located on the device information label/engraving. </td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">1. To enter the router's Web interface (WebUI), type http://192.168.1.1 into the URL field of your Internet browser.<br><br>2. When prompted for authentication enter the username admin and enter the password located on the device information label/engraving. <br><br>3. After logging in, you must set a new password for security reasons. You will not be able to interact with the router’s WebUI until the default password is changed. The new password must consist of a minimum of '''8 characters'''. Requirements: one uppercase letter, one lowercase letter, and one digit.<br><br>4. Next, the Configuration Wizard will start to help you set up some of the router's main operational parameters.<br></td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:Login to device step 1.png|right|600 px]]</td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:Login to device step 1.png|right|600 px]]</td>
</tr>
</tr>
</table>
</table>
[[Category:RUT140]]
[[Category:RUT140]]