Changes

QSG RUTC50 (view source)

Revision as of 15:19, 21 June 2024

6,017 bytes removed ,  21 June
→‎Video Quick Start Guide
Line 1: Line 1: −
This Wiki page contains the online version of the '''Quick Start Guide (QSG)''' for the '''RUTC50 5G Router'''. Here you will find an overview of the various components on the front and back of a RUTC50 device, hardware installation instructions, first login information, device specifications, and general safety information. It is highly recommended to acquaint yourself with the Quick Start Guide before using the device. You can also locate a printed version of the Quick Start Guide in the packaging box of your device.
+
This Wiki page contains the online version of the '''Quick Start Guide (QSG)''' for the '''RUTC50 5G Router with WI-FI 6'''. Here you will find an overview of the various components on the front and back of a RUTC50 device, hardware installation instructions, first login information, device specifications, and general safety information. It is highly recommended to acquaint yourself with the Quick Start Guide before using the device. You can also locate a printed version of the Quick Start Guide in the packaging box of your device.
    
<table>
 
<table>
Line 14: Line 14:     
Before starting operating the device, please review recommendations and precautions to minimize the possibility of accidents. Safety precautions presented are supplementary and subject to the local safety regulations. When various operations are executed on the device, the user must fully follow the safety instructions and recommendations provided with the device.
 
Before starting operating the device, please review recommendations and precautions to minimize the possibility of accidents. Safety precautions presented are supplementary and subject to the local safety regulations. When various operations are executed on the device, the user must fully follow the safety instructions and recommendations provided with the device.
−
----
+
 
 
== General ==
 
== General ==
 
{| class="wikitable"
 
{| class="wikitable"
Line 126: Line 126:  
|}
 
|}
   −
'''FCC'''
+
{{Template: Markings RF function with PSU
−
 
+
<!------------------------DEVICE----------------------->
−
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
+
| device         = RUTC50
−
 
+
}}
−
# This device may not cause harmful interference.
  −
# This device must accept any interference received, including interference that may cause undesired operation.
  −
 
  −
 
  −
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  −
* Reorient or relocate the receiving antenna.
  −
* Increase the separation between the equipment and receiver.
  −
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  −
* Consult the dealer or an experienced radio/TV technician for help.
  −
 
  −
'''FCC Caution:''' Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  −
 
  −
'''ISED Canada'''
  −
 
  −
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:
  −
 
  −
# This device may not cause interference;
  −
# This device must accept any interference, including interference that may cause undesired operation of the device.
  −
 
  −
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
  −
# L'appareil ne doit pas produire de brouillage;
  −
# L'appareil doit accepter tout brouillage radioélectrique subi, mźme si le brouillage est.
  −
 
     −
Detailed compliance information is available at the following internet address: [https://wiki.teltonika-networks.com/view/Certificates wiki.teltonika-networks.com/view/Certificates].
+
== RF exposure ==
   −
  −
[[Image:Instructions_LOGO.png|50px]] This sign means that is necessary to read the User's Manual before you start using the device.
  −
  −
[[Image:WEEE_LOGO.png|50px]] This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.
  −
  −
=== RF exposure ===
  −
----
   
This device meets the official requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by authorized agencies. The device must be used with a minimum separation of 20 cm from a person’s body to ensure compliance with RF exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding the applicable limits.
 
This device meets the official requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by authorized agencies. The device must be used with a minimum separation of 20 cm from a person’s body to ensure compliance with RF exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding the applicable limits.
   Line 168: Line 138:     
Any external antenna gain must meet RF exposure and maximum radiated output power limits of the applicable rule section.
 
Any external antenna gain must meet RF exposure and maximum radiated output power limits of the applicable rule section.
−
  −
'''FCC Radiation Exposure Statement:'''
  −
  −
This device complies with the relevant FCC RF radiation exposure limit set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20 cm from all persons.
  −
  −
'''ISED Canada Statements:'''
  −
  −
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
  −
  −
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR‐102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
  −
  −
----
  −
  −
This radio transmitter '''IC: 26511-RUTC50''' has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
      
{| class="wikitable"
 
{| class="wikitable"
 +
! colspan="2" |Maximum transmission power
 
|-
 
|-
−
! Antenna type !! Maximum antenna gain (dBi) !! Impedance (ohm)
+
|WCDMA
−
|-
+
|24 dBm
−
| Mobile antenna || 4.5 || 50
  −
|-
  −
| WiFi antenna || 3.59 || 50
  −
|}
  −
 
  −
Le présent émetteur radio '''IC: 26511-RUTC50''' a été approuvé par Innovation, Sciences et Développement économique Canada pour fonctionner avec les types d'antenne énumérés ci‑dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'émetteur.
  −
 
  −
{| class="wikitable"
   
|-
 
|-
−
! Type d’antenne !! Gain d’antenne maxima (dBi) !! Impédance (ohm)
+
|LTE
 +
|23 dBm
 
|-
 
|-
−
| Antenne mobile || 4.5 || 50
+
|Wi-Fi 2.4G
 +
|20 dBm
 
|-
 
|-
−
| Antenne WiFi || 3.59 || 50
+
|Wi-Fi 5G
 +
|23 dBm
 
|}
 
|}
   −
----
+
[[Image:Restrictions_LOGO.png|50px]] In all EU member states, operation of 5150-5350 MHz is restricted to indoor use only.
−
 
  −
1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
  −
 
  −
2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.
  −
 
  −
3. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate.
  −
 
  −
 
  −
1. Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
  −
 
  −
2. Pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis pour les dispositifs utilisant les bandes de 5 250 à 5 350 MHz et de 5 470 à 5 725 MHz doit être conforme à la limite de la p.i.r.e.
  −
 
  −
3. Pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis (pour les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée.
      
=Product Safety and Use=
 
=Product Safety and Use=
    
== Operating conditions ==
 
== Operating conditions ==
−
----
+
 
 
* Operating temperature: -40° to +75° Celsius
 
* Operating temperature: -40° to +75° Celsius
 
* Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry environments.
 
* Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry environments.
Line 230: Line 169:     
== Faulty and damaged products ==
 
== Faulty and damaged products ==
−
----
      
* Do not attempt to disassemble the device or its accessories.
 
* Do not attempt to disassemble the device or its accessories.
Line 237: Line 175:     
== Electrical safety ==
 
== Electrical safety ==
−
----
      
* Only use approved accessories.
 
* Only use approved accessories.
Line 244: Line 181:     
== Product handling ==
 
== Product handling ==
−
----
      
* You alone are responsible for how you use your device and any consequences related to its use.
 
* You alone are responsible for how you use your device and any consequences related to its use.
Line 274: Line 210:     
<br>
 
<br>
−
[[File:RUTX50_Front_view_Schematics.png|center|800 px|link=Special:FilePath/RUTX50_Front_view_Schematics.png]]
+
[[File:RUTC50_Front_view_Schematics.PNG|center|900 px|link=Special:FilePath/RUTC50_Front_view_Schematics.PNG]]
    
== Back view ==
 
== Back view ==
    
<br>
 
<br>
−
[[File:RUTX50_Back_view_Schematics.png|center|800 px|link=Special:FilePath/RUTX50_Back_view_Schematics.png]]
+
[[File:RUTC50_Back_view_Schematics.PNG|center|900 px|link=Special:FilePath/RUTC50_Back_view_Schematics.PNG]]
    
== Connectors ==
 
== Connectors ==
Line 292: Line 228:  
     </tr>
 
     </tr>
 
</table>
 
</table>
−
  −
== Video Quick Start Guide ==
  −
  −
Need some help setting up your new Teltonika Networks RUTC50 Industrial 5G Router? Watch our quick start guide video and follow the step by step instructions to easily set up your new router for operation.
  −
  −
<youtube>UVZfIjCPjQY</youtube>
  −
<br>
  −
      
== Hardware installation ==
 
== Hardware installation ==
Line 306: Line 234:  
<table>
 
<table>
 
     <tr>
 
     <tr>
−
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:Hardware_installation_step_1.png|left]]</td>
+
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTC50_Hardware_installation_step_1.PNG|left]]</td>
−
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTX50_Hardware_installation_step_2.png|right]]</td>
+
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTC50_Hardware_installation_step_2.PNG|right]]</td>
 
     </tr>
 
     </tr>
    
<tr>
 
<tr>
−
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTX50_Hardware_installation_step_3.png|left]]</td>
+
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTC50_Hardware_installation_step_3.jpg|left]]</td>
−
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTX50_Hardware_installation_step_4.png|right]]</td>
+
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTC50_Hardware_installation_step_4.jpg|right]]</td>
 
     </tr>
 
     </tr>
    
<tr>
 
<tr>
−
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTX50_Hardware_installation_step_5.png|left]]</td>
+
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTC50_Hardware_installation_step_5.jpg|left]]</td>
−
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTX50_Hardware_installation_step_6.png|right]]</td>
+
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTC50_Hardware_installation_step_6.jpg|right]]</td>
 
     </tr>
 
     </tr>
    
<tr>
 
<tr>
−
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTX50_Hardware_installation_step_7.png|left]]</td>
+
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTC50_Hardware_installation_step_7.jpg|left]]</td>
−
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTX50_Hardware_installation_step_8.png|right]]</td>
+
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;">[[File:RUTC50_Hardware_installation_step_8.jpg|right]]</td>
 
     </tr>
 
     </tr>
    
<tr>
 
<tr>
−
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTX50 Hardware installation step 9.png|left]]</td>
+
         <td style="vertical-align: top; margin: 10px; padding-bottom: 25px;">[[File:RUTC50_Hardware_installation_step_9.jpg|left]]</td>
 
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;"></td>
 
         <td style="vertical-align: top; margin: 0px; padding-left: 25px; padding-bottom: 25px;"></td>
 
     </tr>
 
     </tr>
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/126673...127615"

Navigation menu