Changes

<br>

<br>

After you hit Generate the Client cert you should see a notification pop-up near the top right, and if you select Certificates Manager you should see a RUT2.key.pem under *Keys* and a RUT1.req.pem under *Certificate requests*.

After you hit Generate the Client cert you should see a notification pop-up near the top right, and if you select Certificates Manager you should see a RUT2.key.pem under *Keys* and a RUT2.req.pem under *Certificate requests*.

<br>

<br>

* Connection settings General settings configuration as follows:

* Connection settings General settings configuration as follows:

     - Mode: '''''Start''''' // start loads a connection and brings

     - Mode: '''''Start''''' // start loads a connection and brings it up immediately. For more configuration information please reference *auto* here (https://wiki.strongswan.org/projects/strongswan/wiki/Connsection)

it up immediately. For more configuration information please reference *auto* here (https://wiki.strongswan.org/projects/strongswan/wiki/Connsection)

     - Type: '''''Tunnel'''''

     - Type: '''''Tunnel'''''

* Connection settings General settings configuration as follows:

* Connection settings General settings configuration as follows:

     - Mode: '''''Start''''' // start loads a connection and brings

     - Mode: '''''Start''''' // start loads a connection and brings it up immediately. For more configuration information please reference *auto* here (https://wiki.strongswan.org/projects/strongswan/wiki/Connsection)

it up immediately. For more configuration information please reference *auto* here (https://wiki.strongswan.org/projects/strongswan/wiki/Connsection)

     - Type: '''''Tunnel'''''

     - Type: '''''Tunnel'''''