9,293
edits
Changes
no edit summary
</table>
</table>
}}|}}{{#ifeq: {{{mobile}}} | 1 | <h2>Mobile network type LEDs</h2>
}}|}}{{#ifeq: {{{mobile}}} | 1 | <h2>Mobile network type LEDs</h2>
{{#switch: {{{series}}} | TRB2M =
{{#switch: {{{name}}} | TRB256 =
The <b>mobile network type LEDs</b> are located on left side of the back panel:
The <b>mobile network type LEDs</b> are located on left side of the back panel:
</tr>
</tr>
<tr>
<tr>
<td>4G, NB and M1 LEDs are blinking at the same time</td>
<td>2G, NB and M1 LEDs are blinking at the same time</td>
<td>No SIM or bad PIN</td>
<td>No SIM or bad PIN</td>
</tr>
</tr>
<tr>
<tr>
<td>4G, NB and M1 LEDs light up and down in sequence</td>
<td>2G, NB and M1 LEDs light up and down in sequence</td>
<td>Searching mobile network operator</td>
<td>Searching mobile network operator</td>
</tr>
</tr>
<tr>
<tr>
<td>4G/NB/M1 LED blinking</td>
<td>2G/NB/M1 LED blinking</td>
<td>Gateway connected to 2G/NB/M1, no data session established</td>
<td>Gateway connected to 2G/NB/M1, no data session established</td>
</tr>
</tr>
<tr>
<tr>
<td>4G/NB/M1 LED turned ON</td>
<td>2G/NB/M1 LED turned ON</td>
<td>Gateway connected to 2G/NB/M1 with data session</td>
<td>Gateway connected to 2G/NB/M1 with data session</td>
</tr>
</tr>
<tr>
<tr>
<td>4G/NB/M1 LED blinking</td>
<td>2G/NB/M1 LED blinking</td>
<td>Gateway connected to 2G/NB/M1 and data is being transferred</td>
<td>Gateway connected to 2G/NB/M1 and data is being transferred</td>
</tr>
</table>
| TRM500 =
The <b>mobile network type LED</b> is located on right side of the back panel:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
Indicates that the device has an Internet connection.
<table class="nd-othertables_2">
<tr>
<th style="width: 550px>Action</th>
<th style="width: 550px>Description</th>
</tr>
<tr>
<td>Flicker slowly (200 ms High/1800 ms Low)</td>
<td>Network searching.</td>
</tr>
<tr>
<td>Flicker slowly (1800 ms High/200 ms Low)</td>
<td>Idle.</td>
</tr>
<tr>
<td>Flicker quickly (125 ms High/125 ms Low)</td>
<td>Data transfer is ongoing.</td>
</tr>
<tr>
<td>Always ON</td>
<td>Voice calling.</td>
</tr>
<tr>
<td>Always OFF</td>
<td>Minimum functionality mode.</td>
</tr>
</table>
The <b>5G LED</b> is located on right side of the back panel:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_5G.png|500px]]
Indicates that the device is connected to a 5G network.
<table class="nd-othertables_2">
<tr>
<th style="width: 550px>Action</th>
<th style="width: 550px>Description</th>
</tr>
<tr>
<td>On</td>
<td>Device is registered to a network.</td>
</tr>
<tr>
<td>Off</td>
<td>Device is not registered to a network.</td>
</tr>
</tr>
</table>
</table>
</tr>
</tr>
</table>}}
</table>}}
{{#ifeq: {{{name}}} | TRM500 ||
<h2>Mobile signal strength indication LEDs</h2>
{{#switch: {{{series}}} | TRB2M =
{{#switch: {{{series}}} | TRB2M =
The <b>mobile signal strength indication LEDs</b> are located on left side of the back panel.
The <b>mobile signal strength indication LEDs</b> are located on left side of the back panel.
After releasing the button at one of the reset periods, all {{#ifeq: {{{name}}} | RUTX12 | {{#expr: {{{mobile_leds}}} * 2}} | {{{mobile_leds}}}}} LEDs will start blinking every 1 second. This signifies that the router <b>has begun the reset</b>.
After releasing the button at one of the reset periods, all {{#ifeq: {{{name}}} | RUTX12 | {{#expr: {{{mobile_leds}}} * 2}} | {{{mobile_leds}}}}} LEDs will start blinking every 1 second. This signifies that the router <b>has begun the reset</b>.
|}}
|}}}}
[[Category:{{{name}}} Manual]]
[[Category:{{{name}}} Manual]]