Changes

==Introduction==

==Introduction==

This article describes the process of updating an RUTxxx router's firmware via command line. It applies to [[RUT230]], [[RUT240]], [[RUT850]], [[RUT950]] and [[RUT955]] routers.

This article describes the process of updating an RUTxxx router's firmware via command line. It applies to all RUTXxx, RUT2xx, RUT9xx devices, like:[https://wiki.teltonika-networks.com/view/RUT200 RUT200], [https://wiki.teltonika-networks.com/view/RUT241 RUT241], [https://wiki.teltonika-networks.com/view/RUT901 RUT901], [https://wiki.teltonika-networks.com/view/RUT951 RUT951] and [https://wiki.teltonika-networks.com/view/RUTX11 RUTX11] routers.

Upgrading the router's firmware via command line can be beneficial when:

Upgrading the router's firmware via command line can be beneficial when:

Use the '''scp''' command to copy the firmware file via SSH. Open up a Terminal in the directory where the file is located (right-click any blank space in the directory and select "Open in Terminal"). Then enter the following command:

Use the '''scp''' command to copy the firmware file via SSH. Open up a Terminal in the directory where the file is located (right-click any blank space in the directory and select "Open in Terminal"). Then enter the following command:

<pre>

<pre>

scp RUT9XX_R_00.05.00.5_WEBUI.bin [email protected]:/tmp/

scp RUTX_R_00.07.08_WEBUI.bin [email protected]:/tmp/

</pre>

</pre>

Where:

Where:

<ul>

<ul>

<li>

<li>

'''RUT9XX_R_00.05.00.5_WEBUI.bin''' is the firmware file's name. Replace it with your firmware's name.

'''RUTX_R_00.07.08_WEBUI.bin''' is the firmware file's name. Replace it with your firmware's name.

</li>

</li>

<li>

<li>