Difference between revisions of "Template:Networking rutos configuration example l2tp over ipsec android"

From Teltonika Networks Wiki
 
(19 intermediate revisions by one other user not shown)
Line 3: Line 3:
 
         <th width=325; style="border-bottom: 1px solid white;></th>
 
         <th width=325; style="border-bottom: 1px solid white;></th>
 
         <th width=820; style="border-bottom: 1px solid white;" rowspan=2;>
 
         <th width=820; style="border-bottom: 1px solid white;" rowspan=2;>
−
[[File:Networking_RUTX_VPN_between_HQ_topology_v3.png|border|class=tlt-border|750px|right]]</th>
+
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_topology_v1.png|border|class=tlt-border|750px|right]]</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 21: Line 21:
 
* At least one Android device
 
* At least one Android device
  
−
The topology above depicts the L2TP/IPsec scheme. - The router with the Public IP address ('''''RUTX11''''') acts as the '''L2TP/IPsec server''' and the '''Android device''' acts as '''client'''. L2TP connects the networks of '''RUTX11''' and '''Android client''', IPsec provides the encryption for the L2TP tunnel. Created VPN tunnel will allow Android device to reach home network behind the RUTX11 router, but the rest of Android device network traffic will not be redirected through VPN. This way the VPN tunnel will not be under a huge load and will provide greater speeds.
+
The topology above depicts the L2TP/IPsec scheme. The router with the Public IP address ('''RUTX''') acts as the '''L2TP/IPsec server''' and the '''Android device''' acts as '''client'''. L2TP connects the networks of '''RUTX''' and '''Android client''', IPsec provides the encryption for the L2TP tunnel. Created VPN tunnel will allow Android device to reach home network behind the RUTX router, but the rest of Android device network traffic will not be redirected through VPN. This way the VPN tunnel will not be under a huge load and will provide greater speeds.
  
−
When the scheme is realized, you will be able to reach your home internal network with all internal systems, cameras, or other IOT devices globally.
+
When the scheme is realized, you will be able to log on to your home network from anywhere - work, hotel, car. You will have access to all of your home resources, and your data will still be secure, even if you will be using public WiFi.
  
 
==Configuring home router (RUTX)==
 
==Configuring home router (RUTX)==
 +
As mentioned in the prerequisites section, the router that acts as the server must have a Public Static or Public Dynamic IP address (more information on the subject can be found here). If that is in order, we should start configuring the server.
 
===L2TP===
 
===L2TP===
−
----
+
 
  
 
<table class="nd-othertables_2">
 
<table class="nd-othertables_2">
 
     <tr>
 
     <tr>
 
         <th width=355; style="border-bottom: 1px solid white;></th>
 
         <th width=355; style="border-bottom: 1px solid white;></th>
−
         <th width=790; style="border-bottom: 1px solid white;" rowspan=2>  
+
         <th width=790; style="border-bottom: 1px solid white;" rowspan=2> [[File:RutOS_L2TP_IPsec_VPN_7,8_add_L2TP_Server.png|770px|right]]</th>
−
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_1_v1.png|770px|right]]</th>
 
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 39: Line 39:
 
Login to the router's WebUI and navigate to the '''Services → VPN → L2TP''' page and do the following:
 
Login to the router's WebUI and navigate to the '''Services → VPN → L2TP''' page and do the following:
 
<ol>
 
<ol>
 +
    <li>Select '''Role: Server'''.</li>
 
     <li>Enter a '''custom configuration name'''.</li>
 
     <li>Enter a '''custom configuration name'''.</li>
−
    <li>Select '''Role: Server'''.</li>
+
     <li>Click the '''Add''' button. You will be prompted to the configuration window</li>
−
     <li>Click the '''Add''' button.</li>
 
−
    <li>Click the '''Edit''' button next to the newly created L2TP instance.</li>
 
 
</ol>
 
</ol>
 
         </td>
 
         </td>
Line 53: Line 52:
 
     <tr>
 
     <tr>
 
         <th width=355; style="border-bottom: 1px solid white;></th>
 
         <th width=355; style="border-bottom: 1px solid white;></th>
−
         <th width=790; style="border-bottom: 1px solid white;" rowspan=2>
+
         <th width=790; style="border-bottom: 1px solid white;" rowspan=2>[[File:RutOS_L2TP_IPsec_VPN_7,8_add_L2TP_Server_config.png|770px|right]]</th>
−
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_2_v1.png|770px|right]]</th>
 
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 60: Line 58:
 
<ol>
 
<ol>
 
     <li>'''Enable''' the L2TP instance.</li>
 
     <li>'''Enable''' the L2TP instance.</li>
−
     <li>Enter a '''Username''' and '''Password''' which later will be used for client authentication.</li>
+
    <li>Click on the '''Add''' button to add a new user</li>
−
     <li>Optionally, set a fixed IP for this client (if left empty, client will receive first free IP from the IP range).</li>
+
     <li>Enter a '''User name''' and '''Password''' for authentication for the client.</li>
 +
     <li>Optionally, set a fixed IP for this client (if left empty, the client will receive the first free IP from the IP range).</li>
 
     <li>Don't forget to '''Save''' the changes.</li>
 
     <li>Don't forget to '''Save''' the changes.</li>
 
</ol>
 
</ol>
Line 74: Line 73:
 
     <tr>
 
     <tr>
 
         <th width=355; style="border-bottom: 1px solid white;></th>
 
         <th width=355; style="border-bottom: 1px solid white;></th>
−
         <th width=790; style="border-bottom: 1px solid white;" rowspan=2>
+
         <th width=790; style="border-bottom: 1px solid white;" rowspan=2>[[File:RutOS_L2TP_IPsec_VPN_7,8_add_Ipsec_Server.png|770px|right]]</th>
−
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_3_v1.png|770px|right]]</th>
 
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 81: Line 79:
 
Go to the '''Services → VPN → IPsec''' page and do the following:
 
Go to the '''Services → VPN → IPsec''' page and do the following:
 
<ol>     
 
<ol>     
−
       <li>Enter a custom '''Name''' for the IPsec instance.</li>
+
       <li>Enter a custom name for the IPsec instance.</li>
−
       <li>Click the '''Add''' button.</li>
+
       <li>Click the '''Add''' button. You will be prompted to the configuration window</li>
−
      <li>Click the '''Edit''' button next to the newly created instance.</li>
 
 
</ol>
 
</ol>
 
         </td>
 
         </td>
Line 94: Line 91:
 
     <tr>
 
     <tr>
 
         <th width=355; style="border-bottom: 1px solid white;></th>
 
         <th width=355; style="border-bottom: 1px solid white;></th>
−
         <th width=790; style="border-bottom: 1px solid white;" rowspan=2>
+
         <th width=790; style="border-bottom: 1px solid white;" rowspan=2>[[File:RutOS_L2TP_IPsec_VPN_7,8_add_Ipsec_Server_config_instnace222.png|770px|right]]</th>
−
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_4_v1.png|770px|right]]</th>
+
  </tr>
−
    </tr>
 
 
     <tr>
 
     <tr>
 
         <td style="border-bottom: 1px solid white>
 
         <td style="border-bottom: 1px solid white>
Line 103: Line 99:
 
       <li>'''Enable''' the instance.</li>
 
       <li>'''Enable''' the instance.</li>
 
       <li>Enter your '''Pre-shared key'''.</li>
 
       <li>Enter your '''Pre-shared key'''.</li>
−
      <li>Select '''Type: Transport'''.</li>
 
−
      <li>Set '''DH group''' to '''MODP1024'''.</li>
 
−
      <li>Go to '''Phase 2''' settings and also set '''DH group''' to '''MODP1024'''.</li>
 
−
      <li>'''Save''' changes.</li>
 
 
</ol>
 
</ol>
 
         </td>
 
         </td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
−
 
−
===Firewall===
 
−
----
 
−
 
 
<table class="nd-othertables_2">
 
<table class="nd-othertables_2">
 
     <tr>
 
     <tr>
 
         <th width=355; style="border-bottom: 1px solid white;></th>
 
         <th width=355; style="border-bottom: 1px solid white;></th>
−
         <th width=790; style="border-bottom: 1px solid white;" rowspan=2>
+
         <th width=790; style="border-bottom: 1px solid white;" rowspan=2>[[File:RutOS_L2TP_IPsec_VPN_7,8_add_Ipsec_Server_config_instance_connection.png|770px|right]]</th>
−
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_3_v1.png|770px|right]]</th>
+
  </tr>
−
    </tr>
 
 
     <tr>
 
     <tr>
 
         <td style="border-bottom: 1px solid white>
 
         <td style="border-bottom: 1px solid white>
−
Go to the '''Services → VPN → IPsec''' page and do the following:
 
 
<ol>     
 
<ol>     
−
      <li>Enter a custom '''Name''' for the IPsec instance.</li>
+
'''3.''' Select '''Type: Transport'''.
−
      <li>Click the '''Add''' button.</li>
+
<br>
−
      <li>Click the '''Edit''' button next to the newly created instance.</li>
+
Do not forget to '''Save''' changes.
 
</ol>
 
</ol>
 +
        </td>
 +
    </tr>
 +
</table>
 +
----
 +
'''Note:''' ''This is only an example of a secure configuration. Other algorithms or even combinations of them could be used. However, we strongly recommend refraining from using older encryption and hashing algorithms unless support for certain legacy systems is required.''
 +
 +
Make the following changes:
 +
<table class="nd-othertables_2">
 +
    <tr>
 +
        <th width=330; style="border-bottom: 1px solid white;></th>
 +
        <th width=800; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_webui_manual_IPsec_configuration_proposal_phase1_settings_v1.png|border|class=tlt-border|671x336px|center]]</th>
 +
    </tr>
 +
    <tr>
 +
        <td style="border-bottom: 4px solid white>
 +
# Encryption - '''''AES256;'''''
 +
# Authentication - '''''SHA512;'''''
 +
# DH group - '''''MODP4096;'''''
 +
# IKE lifetime - '''86400s'''.
 
         </td>
 
         </td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
 +
 +
----
 +
<table class="nd-othertables_2">
 +
    <tr>
 +
        <th width=330; style="border-bottom: 1px solid white;></th>
 +
        <th width=800; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_webui_manual_IPsec_configuration_proposal_phase2_settings_v1.png|border|class=tlt-border|644x331px|center]]</th>
 +
    </tr>
 +
    <tr>
 +
        <td style="border-bottom: 4px solid white>
 +
# Encryption - '''''AES256;'''''
 +
# Authentication - '''''SHA512;'''''
 +
# PFS group - '''''MODP4096;'''''
 +
# Lifetime – '''''86400s;'''''
 +
        </td>
 +
    </tr>
 +
</table>
 +
 +
===Firewall===
 +
----
 +
Now go to the '''Network → Firewall → General Settings''' page
  
 
----
 
----
Line 139: Line 163:
 
         <th width=355; style="border-bottom: 1px solid white;></th>
 
         <th width=355; style="border-bottom: 1px solid white;></th>
 
         <th width=790; style="border-bottom: 1px solid white;" rowspan=2>
 
         <th width=790; style="border-bottom: 1px solid white;" rowspan=2>
−
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_4_v1.png|770px|right]]</th>
+
[[File:RutOS_L2TP_IPsec_android_7.8_1.png|770px|right]]</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td style="border-bottom: 1px solid white>
 
         <td style="border-bottom: 1px solid white>
−
In the '''IPsec Configuration''' page, do the following (and leave the rest as defaults, unless your specific configuration requires otherwise):
 
 
<ol>     
 
<ol>     
−
       <li>'''Enable''' the instance.</li>
+
       <li>Set '''Forward: accept'''.</li>
−
      <li>Enter your '''Pre-shared key'''.</li>
 
−
      <li>Select '''Type: Transport'''.</li>
 
−
      <li>Set '''DH group''' to '''MODP1024'''.</li>
 
−
      <li>Go to '''Phase 2''' settings and also set '''DH group''' to '''MODP1024'''.</li>
 
 
       <li>'''Save''' changes.</li>
 
       <li>'''Save''' changes.</li>
 
</ol>
 
</ol>
Line 177: Line 196:
 
         <th width=525; style="border-bottom: 1px solid white;"></th>
 
         <th width=525; style="border-bottom: 1px solid white;"></th>
 
         <th width=620; style="border-bottom: 1px solid white;" rowspan=2>
 
         <th width=620; style="border-bottom: 1px solid white;" rowspan=2>
−
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_6_v2.png|border|class=tlt-border|300px|center]]</th>
+
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_6_v3.png|border|class=tlt-border|300px|center]]</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 198: Line 217:
 
         <th width=525; style="border-bottom: 1px solid white;"></th>
 
         <th width=525; style="border-bottom: 1px solid white;"></th>
 
         <th width=620; style="border-bottom: 1px solid white;" rowspan=2>
 
         <th width=620; style="border-bottom: 1px solid white;" rowspan=2>
−
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_7_v2.png|border|class=tlt-border|300px|center]]</th>
+
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_7_v3.png|border|class=tlt-border|300px|center]]</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 204: Line 223:
 
         <ol>
 
         <ol>
 
             <li>Write the '''DNS servers''' you are planning to use (in this example we used google DNS servers).</li>
 
             <li>Write the '''DNS servers''' you are planning to use (in this example we used google DNS servers).</li>
−
             <li>Add '''Forwarding routes''' (RUTX11 LAN network).</li>
+
             <li>Add '''Forwarding routes''' (RUTX LAN network).</li>
 
             <li>'''Save''' settings.</li>
 
             <li>'''Save''' settings.</li>
 
         </ol>
 
         </ol>
Line 261: Line 280:
 
     </tr>
 
     </tr>
 
</table>
 
</table>
 +
 +
----
  
 
'''Disclaimer:'''
 
'''Disclaimer:'''
  
 
This configuration example was created by using Android version 10. The IPsec '''Phase 1''' and '''Phase 2''' settings, which were used in this configuration example, might not work with other Android versions and might require adjustment.
 
This configuration example was created by using Android version 10. The IPsec '''Phase 1''' and '''Phase 2''' settings, which were used in this configuration example, might not work with other Android versions and might require adjustment.

Latest revision as of 12:51, 22 August 2024

Networking rutos configuration example l2tp over ipsec android topology v1.png

Configuration overview and prerequisites

Prerequisites:

  • One RUTX router of any type
  • A Public Static or Public Dynamic IP address
  • At least one Android device

The topology above depicts the L2TP/IPsec scheme. The router with the Public IP address (RUTX) acts as the L2TP/IPsec server and the Android device acts as client. L2TP connects the networks of RUTX and Android client, IPsec provides the encryption for the L2TP tunnel. Created VPN tunnel will allow Android device to reach home network behind the RUTX router, but the rest of Android device network traffic will not be redirected through VPN. This way the VPN tunnel will not be under a huge load and will provide greater speeds.

When the scheme is realized, you will be able to log on to your home network from anywhere - work, hotel, car. You will have access to all of your home resources, and your data will still be secure, even if you will be using public WiFi.

Configuring home router (RUTX)

As mentioned in the prerequisites section, the router that acts as the server must have a Public Static or Public Dynamic IP address (more information on the subject can be found here). If that is in order, we should start configuring the server.

L2TP

RutOS L2TP IPsec VPN 7,8 add L2TP Server.png

Login to the router's WebUI and navigate to the Services → VPN → L2TP page and do the following:

  1. Select Role: Server.
  2. Enter a custom configuration name.
  3. Click the Add button. You will be prompted to the configuration window
RutOS L2TP IPsec VPN 7,8 add L2TP Server config.png
  1. Enable the L2TP instance.
  2. Click on the Add button to add a new user
  3. Enter a User name and Password for authentication for the client.
  4. Optionally, set a fixed IP for this client (if left empty, the client will receive the first free IP from the IP range).
  5. Don't forget to Save the changes.

IPsec

RutOS L2TP IPsec VPN 7,8 add Ipsec Server.png

Go to the Services → VPN → IPsec page and do the following:

  1. Enter a custom name for the IPsec instance.
  2. Click the Add button. You will be prompted to the configuration window
RutOS L2TP IPsec VPN 7,8 add Ipsec Server config instnace222.png

In the IPsec Configuration page, do the following (and leave the rest as defaults, unless your specific configuration requires otherwise):

  1. Enable the instance.
  2. Enter your Pre-shared key.
RutOS L2TP IPsec VPN 7,8 add Ipsec Server config instance connection.png
    3. Select Type: Transport.
    Do not forget to Save changes.

Note: This is only an example of a secure configuration. Other algorithms or even combinations of them could be used. However, we strongly recommend refraining from using older encryption and hashing algorithms unless support for certain legacy systems is required.

Make the following changes:

Networking webui manual IPsec configuration proposal phase1 settings v1.png
  1. Encryption - AES256;
  2. Authentication - SHA512;
  3. DH group - MODP4096;
  4. IKE lifetime - 86400s.
Networking webui manual IPsec configuration proposal phase2 settings v1.png
  1. Encryption - AES256;
  2. Authentication - SHA512;
  3. PFS group - MODP4096;
  4. Lifetime – 86400s;

Firewall

Now go to the Network → Firewall → General Settings page

RutOS L2TP IPsec android 7.8 1.png
  1. Set Forward: accept.
  2. Save changes.

Android phone

Networking rutos configuration example l2tp over ipsec android 5 v2.png

Go to your Android device VPN settings and create a new VPN network:

Networking rutos configuration example l2tp over ipsec android 6 v3.png

Apply the following configuration:

  1. Select Type: L2TP/IPsec PSK.
  2. Enter the router's WAN IP address into the Server field.
  3. Enter the Pre-shared key exactly as it was specified in the router's IPsec settings.
  4. Press Show advanced options
Networking rutos configuration example l2tp over ipsec android 7 v3.png
  1. Write the DNS servers you are planning to use (in this example we used google DNS servers).
  2. Add Forwarding routes (RUTX LAN network).
  3. Save settings.
Networking rutos configuration example l2tp over ipsec android 8 v2.png

Now open your newly created VPN instance and connect to it:

  1. Write the Username you created in router's L2TP settings.
  2. Write the Password you created in router's L2TP settings.
  3. Press Connect.
Networking rutos configuration example l2tp over ipsec android 9 v2.png

If you applied the configuration correctly, after a moment it should indicate Connected:

Results

Networking rutos configuration example l2tp over ipsec android 10 v1.png

Now you should be able to access your home network resources. To verify the connection you can try accessing your router's WebUI without being connected to it in any way. If you are able to do that, you have successfully connected to your home network.

Disclaimer:

This configuration example was created by using Android version 10. The IPsec Phase 1 and Phase 2 settings, which were used in this configuration example, might not work with other Android versions and might require adjustment.

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_configuration_example_l2tp_over_ipsec_android&oldid=131128"