Changes

153 bytes added , Yesterday at 13:07

no edit summary

Line 112: Line 112:

| TRB141 = '''Note:''' When dry/wet input is not connected to anything - the state of level is undetermined.

| #default =}}

−

{{#switch: {{{name}}}

+

{{#switch: {{{name}}}|RUT955|RUT956|RUT906|TRB245|TRB246|TRB255|TRB141|TRB256 =

−

| RUT955|RUT956|RUT906|TRB245|TRB246|TRB255|TRB141|TRB256 =

'''Note:''' You can edit the adc/acl formula to customize values.

Line 121: Line 120:

Custom I/O status labels for "Analog current loop":

[[File:Networking_manual_input_output_status_formula_acl0.png|border|class=tlt-border]]

−

| #default =

+

| #default =}}

−

}}

===Status from command line===

Line 137: Line 135:

{{#switch: {{{name}}}

−

| RUT300|RUT301|RUT360|TRB245|TRB246|TRB255|TRB140|TRB141|TRB142|TRB143|TRB145|TRB256 = '''Note:''' Changes of configurable pin type from output to input (and reverse) could causes the issues where the specific type was set in configurations. Make sure that configurations do not contradict one another.

+

| RUT300|RUT301|RUT360|TRB245|TRB246|TRB255|TRB140|TRB141|TRB142|TRB143|TRB145|TRB256|TRB160 = '''Note:''' Changes of configurable pin type from output to input (and reverse) could causes the issues where the specific type was set in configurations. Make sure that configurations do not contradict one another.

| #default =

}}

Line 198: Line 196:

<tr>

<td>Turn Output state to high</td>

−

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_state<nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}<nowiki>&state=on</nowiki></td>

+

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/io_state<nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}<nowiki>&state=on</nowiki></td>

</tr>

<tr>

<td>Turn Output state to low after 5 seconds for 3 seconds</td>

−

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_state<nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}&state=on<nowiki>&delay=5</nowiki><nowiki>&time=3</nowiki></td>

+

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/io_state<nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}&state=on<nowiki>&delay=5</nowiki><nowiki>&time=3</nowiki></td>

</tr>

<tr>

<td>Check t_time parameter - time is set in miliseconds</td>

−

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_state<nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}&state=on<nowiki>&t_time=msec</nowiki><nowiki>&time=5000</nowiki><nowiki>&time=1000</nowiki></td>

+

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/io_state<nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}&state=on<nowiki>&t_time=msec</nowiki><nowiki>&time=5000</nowiki><nowiki>&time=1000</nowiki></td>

</tr>

<tr>

<td>Invert input</td>

−

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_invert?username=user1&password=user1&pin={{#ifeq:{{{series}}}|RUTX|din1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}<nowiki>&invert=<0/1> (0 - disable inversion/1 - enable inversion</nowiki></td>

+

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/io_invert?username=user1&password=user1&pin={{#ifeq:{{{series}}}|RUTX|din1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}<nowiki>&invert=<0/1> (0 - disable inversion/1 - enable inversion</nowiki></td>

</tr>

{{#ifeq:{{{configurableio}}}|1|

<tr>

<td>Change Configurable Input/Output with pin3 to Output</td>

−

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_type<nowiki>?username=user1&password=user1&</nowiki>pin=dio0<nowiki>&type=out</nowiki></td>

+

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/io_type<nowiki>?username=user1&password=user1&</nowiki>pin=dio0<nowiki>&type=out</nowiki></td>

</tr>

||}}

Line 223: Line 221:

Overview:

<ul>

−

<li>192.168.{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1 - device default LAN IP address; replace it in accordance with your own configuration.</li>

+

<li>192.168.{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1 - device default LAN IP address; replace it in accordance with your own configuration.</li>

{{#ifeq:{{{configurableio}}}|1|<li>io_state,io_type or io_invert- allows you to change IO state, type or invert cofigurable input.</li>}}

<li>username - login name from Post/Get configuration.</li>

Line 241: Line 239:

* Switch output to High:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on</nowiki>"

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on</nowiki>"

* Switch output to Low after delay:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=off&delay=5</nowiki>"

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=off&delay=5</nowiki>"

====Reading====

Line 252: Line 250:

{{#ifeq:{{{configurableio}}}|1|* {{#switch:{{{name}}}|TRB245|TRB246|TRB255|TRB256 = Read state of Configurable Input/Output PIN2/PIN3/PIN4:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio2</nowiki>" | #default = Read state of Configurable Input/Output PIN3/PIN4:

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio2</nowiki>" | #default = Read state of Configurable Input/Output PIN3/PIN4:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"}}|

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"}}|

* Read state of digital input/output:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din1</nowiki>"

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din1</nowiki>"

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout1</nowiki>"}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout1</nowiki>"}}

{{#ifeq:{{{analog}}}|1|* Read state of analog input (in voltage mode):

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=adc0</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=adc0</nowiki>"|}}

{{#ifeq:{{{acl}}}|1|* Read state of analog input (in current mode):

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=acl0</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=acl0</nowiki>"|}}

{{#ifeq:{{{dry}}}|1|* Read state of Dry input PIN1:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi0</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi0</nowiki>"|}}

{{#ifeq:{{{wet}}}|1|* Read state of Wet input PIN2:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi1</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi1</nowiki>"|}}

{{#ifeq:{{{isolated}}}|1|* Read state of Isolated input:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=iio</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=iio</nowiki>"|}}

{{#ifeq:{{{onewire}}}|1|* Read state of One Wire:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=onewire</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=onewire</nowiki>"|}}

{{#ifeq:{{{relay}}}|1|* Read state of Relay:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay0</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay0</nowiki>"|}}

{{#ifeq:{{{latchingrelay}}}|1|* Read state of Latching Relay:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay1</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay1</nowiki>"|}}

{{#ifeq:{{{galvanic}}}|1|* Read state of Galvanically isolated open collector output:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout2</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout2</nowiki>"|}}

{{#ifeq:{{{digitalpassive}}}|1|* Read state of Digital input (only for passive sensors):

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din2</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din2</nowiki>"|}}

==Scheduler==

Line 308: Line 306:

<tr>

−

<td>output pin; default: {{#ifeq:{{{configurableio}}}|1|Configurable Input/Output (2)|Output (4)}}</td>

+

<td>output pin; default: {{#ifeq:{{{configurableio}}}|1|Configurable Input/Output (3)|Output (4)}}</td>

<td>Output pin. The state of the selected output will be set to "High" during the time interval defined in the fields below.</td>

</tr>

Line 518: Line 516:

<tr>

<td>Control</td>

−

<td>output; default: {{#ifeq:{{{configurableio}}}|1|Configurable Input/Output (2)|Output (4)}}</td>

+

<td>output; default: {{#ifeq:{{{configurableio}}}|1|Configurable Input/Output (3)|Output (4)}}</td>

<td>Selects the output controlled by this Action.</td>

</tr>

Line 940: Line 938:

<tr>

−

<td>inputs/outputs; default: Output(4)</td>

+

<td>inputs/outputs; default: Output(3)</td>

<td>Specifies the I/O pin to which this Condition is listening to.</td>

</tr>

Vainius.l

Administrators

9,293

edits

Changes

Template:Networking rutos manual input output (view source)

Revision as of 13:07, 4 September 2024