403
edits
Changes
VXLAN Configuration Example Lukas Demo (view source)
Revision as of 15:36, 25 September 2024
, 25 September→Configuration testing
The best way to test the configuration after setting up VXLAN between the routers is to ping between devices on either side of the routers using their LAN IPs and check the ARP tables. This ensures that devices on the same LAN segment can communicate over the Layer 2 (L2) network through the routers.
The best way to test the configuration after setting up VXLAN between the routers is to ping between devices on either side of the routers using their LAN IPs and check the ARP tables. This ensures that devices on the same LAN segment can communicate over the Layer 2 (L2) network through the routers.
RUT1:
Configuration testing from RUT1 side:
[[File:Vxlan ping rut1 to rut2.png|border|class=tlt-border]]
[[File:Vxlan ping rut1 to rut2.png|border|class=tlt-border]]
[[File:Vxlan arp rut1.png|border|class=tlt-border]]
[[File:Vxlan arp rut1.png|border|class=tlt-border]]
[[File:Vxlan ping rut2 to rut1.png|border|class=tlt-border]]
[[File:Vxlan arp rut2.png|border|class=tlt-border]]
==Configuring VXLAN over 2 Public IP addresses==
==Configuring VXLAN over 2 Public IP addresses==