Difference between revisions of "Template:Configuration examples RUTOS"

From Teltonika Networks Wiki
 
(80 intermediate revisions by 12 users not shown)
Line 1: Line 1:
−
{{Template: Networking_device_configuration_examples
+
This page contains various configuration guides for the {{#ifeq: {{{main}}} | 1 | Teltonika Networks routers | {{{name}}} router}}. Unlike the articles in the {{#ifeq: {{{main}}} | 1 | router manuals | <b>[[{{{name}}} Manual]]</b>}}, which provide more general knowledge on all of the router's features and functions, these guides are more in-depth and are usually focused on specific configuration scenarios with extensive explanations. While most of the guides apply to both Windows and Linux Operating Systems, some are exclusive to one OS and others aren't OS-specific in any way and apply to any system.
−
| name = {{{name}}}
 
−
}}
 
  
 
__TOC__
 
__TOC__
  
−
==Router control and monitoring==
+
{{#ifeq: {{{routerOrGateway}}} | 1 |
−
 
+
===Router control and monitoring===
−
* [[{{{name}}} Configuration Backup|Configuration Backup]]
 
−
* [[Command Line Interfaces RutOS|Command line interfaces]]
 
−
* [[Monitoring via MQTT|MQTT (Linux guide)]]
 
−
* [[UCI command usage]]
 
−
* [[Crontabs]]
 
−
* [[SSH RSA key authentication (Linux)]]
 
−
* [[SSH RSA key authentication (Windows)]]
 
−
* [[Blocking Internet Access for LAN Clients]]
 
−
{{#ifeq: {{{haslegacy}}} | 1 |*  [[{{{name}}} Monitoring via Modbus RUTOS | Monitoring via Modbus]] |* [[{{{name}}} Monitoring via Modbus | Monitoring via Modbus]]}}<br>
 
−
* [[{{{name}}} modbus custom register block | Modbus custom register block]]
 
−
* [[Monitoring with ThingsBoard IoT Platform]]
 
−
* [[DHCP Relay configuration example| DHCP relay]]
 
−
* [[Monitoring via JSON-RPC windows RutOS|Monitoring via JSON-RPC windows]]
 
−
* [[Monitoring via JSON-RPC linux RutOS|Monitoring via JSON-RPC linux]]
 
−
 
 
−
==System upgrades==
 
−
 
 
−
{{#switch: {{{series}}}
 
−
| RUT2xx | RUT9xx = * [[{{{series}}} Bootloader Upgrade | Bootloader Upgrade]] 
 
−
* [[{{{series}}} Firmware via The Bootloader Menu|Firmware upgrade via the Bootloader Menu]] 
 
−
| RUTX | TRB2xx | TCR1xx = * [[{{{series}}}xx Firmware via The Bootloader Menu|Firmware upgrade via the Bootloader Menu]]
 
−
}}
 
−
* [[Firmware upgrade via command line]]{{#ifeq: {{{sim}}} | 1 |<br>
 
−
==Modem control==
 
−
 
 
−
* [[AT Commands]]
 
−
* [[RUTOS_gsmctl_Commands | RUTOS gsmctl Commands]]
 
−
* [[Multi-APN | Multi-APN (Multiple PDN)]]}}{{#ifeq: {{{eth}}} | 1 |<br>
 
−
==LAN==
 
−
*[[Setting up a PPPoE between RUTX and Mikrotik device|PPPoE with Mikrotik]]
 
−
{{#ifeq: {{{wan}}} | 1 |*[[Setting up WAN as LAN]]}}}}{{#ifeq: {{{wifi}}} | 1 |<br>
 
−
==WiFi==
 
−
 
 
−
* [[How to set up a guest WiFi network on RUTX|How to set up a guest WiFi network]]
 
−
* [[WiFi roaming setup for home/small office]]
 
−
* [[RUTOS relay / Wi-Fi extender / repeater / bridge configuration]]}}{{#ifeq: {{{eth}}} | 1 |<br>
 
−
==Connection backup==
 
−
 
 
−
* [[{{{name}}} VRRP|VRRP]]}}
 
−
 
 
−
==VPN==
 
−
 
 
−
* [[RUTX DMVPN|DMVPN]]
 
−
* [[OpenVPN configuration examples RUT R 00.07|OpenVPN configuration example]]
 
−
* [[IPsec RUTOS configuration example|IPsec cofiguration example]]
 
−
* [[ZeroTier One VPN configuration RutOS|ZeroTier One VPN configuration example]]
 
−
* [[L2TP configuration examples RutOS| L2TP configuration examples]]
 
−
* [[Overlapping subnets with IPsec solution]]
 
−
* [[Setting up a GRE over IPsec tunnel between RUTOS devices|GRE over IPsec Tunnel]]
 
−
* [[Setting up an IPsec tunnel between RUTX and Cisco device|Cisco IPsec]]
 
−
* [[Setting up a GRE tunnel between RUTX and Cisco device|Cisco GRE Tunnel]]
 
−
* [[Setting up a GRE over IPsec tunnel between RUTOS and MikroTik device|Mikrotik GRE over IPsec Tunnel]]
 
−
* [[Setting up a SSTP tunnel between RUTX and Mikrotik device|Mikrotik SSTP]]
 
−
* [[Setting up an OpenVPN tunnel between RUTX and Mikrotik device|Mikrotik OpenVPN]]
 
−
* [[Setting up a L2TP over IPsec tunnel between RUTX and Mikrotik device|Mikrotik L2TP over IPsec]]
 
−
* [[Creating OpenVPN access server and connecting RUTX to it|OpenVPN Access Server]]
 
−
* [[L2TP over IPsec PC|L2TP over IPsec VPN to a PC configuration example]]
 
−
* [[OpenVPN traffic split]]
 
−
* [[OpenVPN over Stunnel RutOS|OpenVPN over Stunnel]]
 
−
 
 
−
==DDNS==
 
−
 
 
−
* [[RUTX Noip.com DDNS configuration|noip.com]]
 
−
* [[RUTX Dynu.com DDNS configuration|dynu.com]]{{#ifeq: {{{usb}}} | 1 |<br>
 
−
==USB==
 
−
 
 
−
* [[How to set up a USB printer (Windows, {{{name}}})|How to set up a USB printer]]}}{{ #ifeq: {{{rs232}}} | 1 | {{ #ifeq: {{{rs485}}} | 1 |<br>
 
−
==RS232/485==
 
−
 
 
−
*[[Bidirectional communication between two serial devices over TCP/IP]]}}}}
 
−
 
 
−
==Email==
 
−
 
 
−
* [[Sending emails via command line]]
 
−
 
 
−
==Camera=={{#ifeq: {{{eth}}} | 1 |* [[Camera access from VPN RUTOS]]<br>
 
−
* [[Hikvision: remote camera access|Remote camera access]]}}
 
−
* [[Camera access from smartphone]]
 
−
 
 
−
==PC==
 
−
 
 
−
=== Windows ===
 
−
 
 
−
* [[Setting up a Static IP address on a Windows 10 PC|Static IP address setup (Windows 10)]]
 
−
* [[OpenVPN client on Windows]]
 
−
* [[OpenVPN server on Windows]]
 
−
* [[How to generate TLS certificates (Windows)?|TLS certificates (Windows)]]{{#ifeq: {{{eth}}} | 1 |* [[{{{name}}} Wake on LAN PC setup (Windows)|Wake on LAN PC setup (Windows)]]|<br>}}
 
−
=== Linux ===
 
−
 
 
−
* [[Setting up a Static IP address on a Ubuntu 16.04 PC|Static IP address setup (Ubuntu 16)]]
 
−
* [[Setting up an FTP server on a Ubuntu 16.04 PC|FTP server (Ubuntu 16)]]
 
−
* [[OpenVPN client on Linux]]
 
−
* [[How to generate TLS certificates (Ubuntu 18)?|TLS certificates (Ubuntu 18)]]
 
−
 
 
−
==SNMP==
 
−
 
 
−
* [[SNMP configuration example]]
 
−
 
 
−
==Use cases==
 
  
 +
<ul>
 +
    <li>[[Configuration Backup RutOS|Configuration Backup]]</li>
 +
    <li>[[Command Line Interfaces RutOS|Command line interfaces]]</li>
 +
    <li>[[Monitoring via MQTT|MQTT (Linux guide)]]</li>
 +
    <li>[[UCI command usage]]</li>
 +
    <li>[[Crontabs]]</li>
 +
    <li>[[SSH RSA key authentication (Linux)]]</li>
 +
    <li>[[SSH RSA key authentication (Windows)]]</li>
 +
    <li>[[Monitoring with ThingsBoard IoT Platform]]</li>
 +
    <li>[[Monitoring via JSON-RPC windows RutOS|Monitoring via JSON-RPC windows]]</li>
 +
    <li>[[Monitoring via JSON-RPC linux RutOS|Monitoring via JSON-RPC linux]]</li>
 +
    <li>[[Monitoring via Zabbix]]</li>
 +
    <li>[[Firewall traffic rules]]</li>
 +
    <li>[[Removing_of_HTTPS_security_warning|Removing of HTTPS security warning]]</li>
 +
    <li>[[MQTT broker bridge]]</li>
 +
    <li>[[OPC UA Configuration Example]]</li>
 +
    <li>[[Setting up external Radius server for RUTOS authentication]]</li>
 +
    <li>[[SSHFS]]</li>
 +
</ul>
 
===VPN===
 
===VPN===
  
−
* [[Connecting two same subnet office networks using OpenVPN bridge (TAP) on RUTX|Connecting two same subnet office networks using OpenVPN bridge (TAP)]]
+
<ul>
−
* [[Connecting to the office network remotely from your home via VPN (L2TP over IPsec) using RUTX | Connecting to the office network remotely from your home via VPN (L2TP over IPsec)]]
+
    <li>[[DMVPN_with_IPsec_Phase_3 | DMVPN configuration example]]</li>
−
* [[Connecting to the office network remotely from your home via VPN (OpenVPN) using RUTX| Connecting to the office network remotely from your home via VPN (OpenVPN)]]
+
    <li>[[DMVPN_(Phase_3)_with_OSPF_configuration_example| DMVPN with OSPF configuration example]]</li>
−
* [[Configuring clients to access internet through office's gateway from home using VPN RUTX | Configuring clients to access internet through office's gateway from home using VPN]]
+
    <li>[[OpenVPN configuration examples|OpenVPN configuration example]]</li>
−
* [[Reaching your home network remotely with your Android device]]
+
    <li>[[IPsec RUTOS configuration example|IPsec cofiguration example]]</li>
−
* [[Bridged office network with a separate Guest WiFi]]
+
    <li>[[ZeroTier One VPN configuration RutOS|ZeroTier One VPN configuration example]]</li>
−
* [[Anonymous browsing from your home network using NordVPN and RUTX router|Anonymous browsing from your home network using NordVPN]]
+
    <li>[[ZeroTier Configuration|ZeroTier configuration example]]</li>
−
* [[Anonymous browsing from your home network using ExpressVPN and RUTX router|Anonymous browsing from your home network using ExpressVPN]]{{#ifeq: {{{di}}} | 1 |<br>
+
    <li>[[L2TP configuration examples RutOS| L2TP configuration example]]</li>
−
===I/O Juggler===
+
    <li>[[Overlapping subnets with IPsec solution]]</li>
−
 
+
    <li>[[Setting up a GRE over IPsec tunnel between RUTOS devices|GRE over IPsec Tunnel]]</li>
−
* [[SMS and Email alerts Triggered by BAT120]]}}{{#ifeq: {{{wifi}}} | 1 |<br>
+
    <li>[[IPsec_Tunnel_with_X.509_Authentication_configuration_example]]</li>
−
===WiFi===
+
    <li>[[L2TP over IPsec RutOS| L2TP over IPsec RutOS]]</li>
−
 
+
    <li>[[Default_IPsec_route_configuration_between_Teltonika_and_Fortigate_devices|Fortigate IPsec default route configuration example]]</li>
−
* [[How to set up a guest WiFi network on RUTX|How to set up a guest WiFi network]]</li>
+
    <li>[[IPsec_site_to_site_configuration_between_Teltonika_and_Fortigate_devices|Fortigate IPsec site to site configuration example]]</li>
−
* [[WiFi roaming setup for home/small office|WiFi roaming setup for home/small office]]</li>
+
    <li>[[Setting up an IPsec tunnel between Teltonika Networks and Cisco devices|Cisco IPsec]]</li>
−
* [[RUTOS relay / Wi-Fi extender / repeater / bridge configuration]]</li>
+
    <li>[[Setting up a GRE tunnel between Teltonika Networks and Cisco devices| Cisco GRE]]</li>
−
* [[ironwifi.com Hotspot Configuration on RutOS firmware|ironwifi.com (RutOS firmware)]]</li>
+
    <li>[[Setting up a GRE over IPsec tunnel between Teltonika Networks and Cisco devices]]</li>
−
* [[cobot.me Hotspot Configuration on RutOS firmware|cobot.me (RutOS firmware)]]</li>}}
+
    <li>[[Setting up a GRE over IPsec tunnel between Teltonika Networks and Mikrotik devices|Mikrotik GRE over IPsec Tunnel]]</li>
−
 
+
    <li>[[Setting up a SSTP tunnel between Teltonika Networks and Mikrotik devices|Mikrotik SSTP]]</li>
 +
    <li>[[Setting up an OpenVPN tunnel between Teltonika Neworks and Mikrotik devices|Mikrotik OpenVPN]]</li>
 +
    <li>[[Setting up a L2TP over IPsec tunnel between Teltonika Networks and Mikrotik devices|Mikrotik L2TP over IPsec]]</li>
 +
    <li>[[Creating OpenVPN access server and connecting it to a Teltonika Networks router|OpenVPN Access Server]]</li>
 +
    <li>[[OpenVPN_Access_Control|OpenVPN Access control]]</li>
 +
    <li>[[Setting up an IPsec tunnel between RUT and Android phone]]</li>
 +
    <li>[[Tinc VPN configuration examples]]</li>
 +
    <li>[[L2TP over IPsec PC|L2TP over IPsec VPN to a PC configuration example]]</li>
 +
    <li>[[OpenVPN traffic split]]</li>
 +
    <li>[[Default_IPsec_route_configuration_between_Teltonika_Networks_devices | Default IPsec route configuration between Teltonika Networks devices]]</li>
 +
    <li>[[OpenVPN over Stunnel RutOS|OpenVPN over Stunnel]]</li>
 +
    <li>[[L2 LAN bridging over internet using L2TPv2+EoIP]]</li>
 +
    <li>[[1NCE Configuration]]</li>
 +
    <li>[[RutOS ExpressVPN configuration example|ExpressVPN configuration example]]</li>
 +
    <li>[[RutOS NordVPN configuration example|NordVPN configuration example]]</li>
 +
</ul>
 +
===IoT platforms===
 +
<ul>
 +
    <li>[[Azure IoT Hub Cloud Connection]]</li>
 +
    <li>[[Cumulocity Configuration | Cumulocity]]</li>
 +
    <li>[[Da³vid configuration example|da³vid]]</li>
 +
    <li>[[AWS MQTT cloud connection|AWS MQTT cloud connection]]</li>
 +
    <li>[[BAG·Tower|BAG Tower]]</li>
 +
    <li>[[N3uron Notifier]]</li>
 +
</ul>
 
===DHCP===
 
===DHCP===
 +
<ul>
 +
    <li>[[DHCP Relay configuration example]]</li>
 +
    <li>[[DHCP_RELAY_over_L2TPv3|DHCP Relay over L2TPv3]]</li>
 +
</ul>
 +
===DLMS===
 +
<ul>
 +
    <li>[[DLMS_client_configuration_example|DLMS client configuration example]]</li>
 +
</ul>
 +
===PC===
 +
====Windows====
 +
<ul>
 +
    <li>[[Setting up a Static IP address on a Windows 10 PC|Static IP address setup (Windows 10)]]</li>
 +
    <li>[[OpenVPN client on Windows]]</li>
 +
    <li>[[OpenVPN server on Windows]]</li>
 +
    <li>[[How to generate TLS certificates (Windows)?|TLS certificates (Windows)]]</li>{{#ifeq: {{{lan}}} | 1 |<li>[[Wake on LAN PC setup (Windows)]]</li>|}}
 +
</ul>
 +
====Linux====
 +
<ul>
 +
    <li>[[Setting up a Static IP address on a Ubuntu 16.04 PC|Static IP address setup (Ubuntu 16)]]</li>
 +
    <li>[[Setting up an FTP server on a Ubuntu 16.04 PC|FTP server (Ubuntu 16)]]</li>
 +
    <li>[[OpenVPN client on Linux]]</li>
 +
    <li>[[How to generate TLS certificates (Ubuntu 18)?|TLS certificates (Ubuntu 18)]]</li>
 +
</ul>
 +
===DDNS===
 +
<ul>
 +
    <li>[[Noip.com_DDNS_configuration_RUTOS|Noip.com DDNS configuration example]]</li>
 +
    <li>[[Dynu.com_DDNS_configuration_RUTOS|Dynu.com DDNS configuration example]]</li>
 +
</ul>
 +
===System upgrades===
 +
<ul>
 +
    <li>[[{{{series}}}_Firmware_via_The_Bootloader_Menu|Firmware upgrade via the Bootloader Menu]]</li>
 +
    <li>[[Firmware_upgrade_via_command_line|Firmware upgrade via command line]]</li>
 +
</ul>
 +
===DNP3===
 +
<ul>
 +
    <li>[[DNP3_TCP_Master|DNP3 TCP server configuration example]]</li>
 +
</ul>
 +
===SNMP===
 +
<ul>
 +
    <li>[[{{{name}}}_SNMP|SNMP configuration example]]</li>
 +
</ul>
 +
===Camera===
 +
<ul>
 +
{{#ifeq: {{{lan}}} | 1 |<li>[[Camera access from VPN RUTOS]]</li>
 +
<li>[[Hikvision: remote camera access|Remote camera access]]</li>|}}
 +
<li>[[Camera access from smartphone]]</li>
 +
</ul>
 +
|}}
 +
{{#ifeq: {{{wifi}}} | 1 |
 +
===Wireless===
  
−
* [[DHCP Relay configuration example]]
+
<ul>
 +
    <li>[[WiFi_WAN_example|Wi-Fi WAN configuration example]]</li>
 +
    <li>[[How_to_set_up_a_guest_WiFi_network|Guest Wi-Fi network configuration example]]</li>
 +
    <li>[[Wireless_Mesh_configuration_example|Wireless Mesh configuration example]]</li>
 +
    <li>[[RUTOS_relay_/_Wi-Fi_extender_/_repeater_/_bridge_configuration|Relay / Wi-Fi extender / Repeater/ Bridge configuration example]]</li>
 +
    <li>[[WiFi_roaming_setup_for_home/small_office|Wi-Fi roaming setup for home or small office]]</li>
 +
    <li>[[Connecting_to_a_Hotspot_WiFi_for_Internet_Connectivity|Connecting to a Hotspot Wi-Fi for internet connectivity]]</li>
 +
    <li>[[Setting_up_external_Radius_server_for_Hotspot_authentication|Setting up external Radius server for Hotspot authentication]]</li>
 +
    <li>[[Relayd_RutOS|Relayd]]</li>
 +
    <li>[[IdBlender Secure WiFi Setup - RUTX Routers|IdBlender Secure WiFi Setup]]</li>
 +
    <li>[[Guglielmo LUMEN® AAA WiFi Setup|Guglielmo LUMEN® AAA WiFi Setup]]</li>
 +
    <li>[[Extending_Router_Hotspot_Network_with_TAP100|Extending Router Hotspot Network with TAP100]]</li>
  
−
==Third party services==
+
</ul>
 +
|}}
  
−
===IoT platforms===
 
  
−
* [[RUTX Azure IoT Hub cloud connection | Azure IoT Hub cloud connection]]
+
{{#ifeq: {{{wan}}} | 1 |
−
* [[Cumulocity Configuration | Cumulocity]]
+
===WAN===
−
* [[Da³vid configuration example|da³vid]]{{#ifeq: {{{wifi}}} | 1 |<br>
+
<ul>
−
===WiFi===
+
    <li>[[Setting up WAN as LAN]]</li>
 +
    <li>[[Load Balancing Rules/Policies examples]]</li>
 +
    <li>[[OSPF Route Failover]]<li>
 +
    <li>[[VRRP example|VRRP configuration example]]</li>
 +
    <li>[[Starlink_Failover_Configuration|Starlink Failover Configuration]]</li>
 +
</ul>
 +
|}}
 +
{{#ifeq: {{{lan}}} | 1 |
 +
===LAN===
  
−
* [[IdBlender Secure WiFi Setup - RUT Routers|IdBlender Secure WiFi Setup]]
+
<ul>
−
* [[Ironwifi.com Hotspot Configuration on RutOS firmware|ironwifi.com]]
+
    <li>[[Setting up a PPPoE between Teltonika Networks router and a Mikrotik device]]</li>
−
* [[purple.ai Hotspot Configuration|purple.ai]]
+
    <li>[[VLAN Inter-Zone accessibility control configuration example]]</li>
−
* [[Guglielmo LUMEN® AAA WiFi Setup|Guglielmo LUMEN® AAA WiFi Setup]]}}
+
    <li>[[LAN as WAN RutOS | LAN as WAN configuration example]]</li>
 +
    <li>[[VLAN: Tag-Based RUTOS | VLAN: Tag-Based configuration example]]</li>
 +
    <li>[[Blocking_Internet_Access_for_LAN_Clients|Blocking Internet access for LAN clients]]</li>
 +
</ul>
 +
|}}
 +
{{#ifeq: {{{usb}}} | 1 |
 +
===USB===
  
−
===VPN===
+
<ul>
 +
    <li>[[How to set up a USB printer (Windows) RUTOS | How to set up a USB printer (Windows)]]</li>
 +
</ul>
 +
|}}
 +
{{#ifeq: {{{rs}}} | 1 |
 +
===RS232/RS485===
  
−
* [[ZeroTier Configuration|ZeroTier]]
+
<ul>
 +
    <li>[[Data transfer from Modbus TCP to Modbus RTU Gateway]]</li>
 +
    <li>[[Modbus RTU Master MQTT Serial Gateway]]</li>
 +
    <li>[[BACnet configuration example]]</li>
 +
    <li>[[Bidirectional communication between two serial devices over TCP/IP]]</li>
 +
    <li>[[Connect Serial Devices as Virtual COM Ports using TRB145 and HW VSP3]]</li>
 +
    <li>[[Reaching Cisco router console port remotely RutOS|Reaching Cisco router console port remotely]]</li>
 +
    <li>[[Serial OverIP communication between Server and Client]]</li>
 +
</ul>
 +
|}}
 +
{{#ifeq: {{{sim}}} | 1 |
 +
===Mobile===
  
−
[[Category:{{{name}}}]]
+
<ul>
 +
    <li>[[AT Commands]]</li>
 +
    <li>[[Locking Devices to a Mobile Cell]]</li>
 +
    <li>[[RUTOS_gsmctl_Commands | GSMCTL commands]]</li>
 +
    <li>[[Multi-APN]]</li>
 +
    <li>[[ESIM_Configuration_example|eSIM configuration example]]</li>
 +
</ul>
 +
|}}
 +
{{#ifeq: {{{di}}} | 1 |<br>
 +
===Hardware application===
 +
<ul>
 +
{{#ifeq: {{{di}}} | 1 | <li>[[Ignition detection solution]]</li> <li>[[SMS and Email alerts Triggered by BAT120]]</li>}}
 +
{{#ifeq: {{{bt}}} | 1 | <li>[[Teltonika EYE device pairing and data sender configuration example | Teltonika EYE device pairing and data sender]]</li>
 +
<li>[[How to use UBUS commands for Bluetooth device scanning / pairing]]</li>|}}
 +
</ul>
 +
|}}
 +
{{#ifeq: {{{mbus}}} | 1 |
 +
===M-Bus===
 +
<ul>
 +
    <li>[[Example_of_sending_M-Bus_data_to_a_server|Sending M-bus data to a server configuration example]]</li>
 +
</ul>
 +
|}}

Latest revision as of 15:28, 26 September 2024

This page contains various configuration guides for the {{{name}}} router. Unlike the articles in the [[{{{name}}} Manual]], which provide more general knowledge on all of the router's features and functions, these guides are more in-depth and are usually focused on specific configuration scenarios with extensive explanations. While most of the guides apply to both Windows and Linux Operating Systems, some are exclusive to one OS and others aren't OS-specific in any way and apply to any system.








Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Configuration_examples_RUTOS&oldid=133108"