Difference between revisions of "Template:Networking rutos manual usb tools"

From Teltonika Networks Wiki
 
(48 intermediate revisions by 6 users not shown)
Line 1: Line 1:
−
{{Template:Networking_rutos_manual_fw_disclosure
+
{{Template: Networking_device_manual_fw_disclosure
−
| fw_version = {{{series}}}_R_00.02.04.1
+
| series = {{{series}}}
−
| series     = {{{series}}}
+
| name  = {{{name}}}
 +
| fw_version ={{Template: Networking_device_manual_latest_fw
 +
| series = {{{series}}}
 +
| name  = {{{name}}}
 +
}}
 
}}
 
}}
−
__TOC__
+
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} USB Tools (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
 +
==Summary==
 +
 
 +
The <b>USB Tools</b> page is used to manage services related to the device's USB connector.
 +
 
 +
This chapter of the user manual provides an overview of the USB Tools page in {{{name}}} devices.
 +
 
 +
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
 +
| series = {{{series}}}
 +
}}
 +
 
 +
==General==
 +
 
 +
The <b>General</b> section is used to manage global USB settings. It consists of two subsections:
 +
 
 +
===USB Mount Settings===
 +
----
 +
The <b>USB Mount Settings</b> section is used to set the transfer type (synchronous or asynchronous) for the USB device.
 +
 
 +
[[File:Networking_rutos_manual_usb_tools_general_usb_mount_settings.png|border|class=tlt-border]]
  
−
==Summary==
+
Synchronous ensures that all changes to the according filesystem are immediately flushed to disk. <b><u>Enabling this will drastically lower the life expectancy of your USB device.</u></b>
 +
 
 +
===Mounted File Systems===
 +
----
 +
The <b>Mounted File Systems</b> list displays USB mass storage devices (MSD) currently attached to this device.
 +
 
 +
[[File:Networking_rutos_manual_usb_tools_general_mounted_file_systems_v3.png|border|class=tlt-border]]
 +
 
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Device</td>
 +
      <td>filepath; default: <b>/dev/sd*</b></td>
 +
      <td>The filesystem of the attached USB MSD.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Mount Point</td>
 +
      <td>filepath; default: <b>/mnt/sd*</b></td>
 +
      <td>The root directory of the mounted filesystem.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Available</td>
 +
      <td>string; default: <b>none</b></td>
 +
      <td>Displays available storage information for a mounted USB MSD.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Used</td>
 +
      <td>string; default: <b>none</b></td>
 +
      <td>Displays used storage information for a mounted USB MSD.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>In Use</td>
 +
      <td>string; default: <b>none</b></td>
 +
      <td>Indicates whether a USB MSD is currently in use by some device service or not.</td>
 +
    </tr>
 +
</table>
 +
 
 +
The <b>Format</b> button can be used to format the attached device, and the <b>Unmount</b> button next to each entry in the list is used to unmount an attached USB device. Please make sure to unmount a USB device before physically detaching it from the {{{name}}}.
  
−
The <b>USB Tools</b> page is used to set up USB printer settings. After the printer is connected to the router's USB port and configured, it can be utilized by users in the local network (LAN, WiFi) or remotely.
+
The <b>Refresh</b> is used to refresh the information in the Mounted File Systems list. If you attach a new USB device and cannot see it in the list, try clicking the 'Refresh' button.
  
−
This manual page provides an overview of the Printer Server page in {{{name}}} devices.
+
'''Note:''' Usb with NTFS partition is supported in read-only mode.
  
 +
{{#ifeq:{{{printer}}}|0||
 
==Printer Server==
 
==Printer Server==
  
−
The <b>Printer Server</b> feature provides the possibility to configure access to a printer that is connected to the USB port of the device. The 'Add' button lets you add and manage additional printers. To configure a printer instance, click the Edit button located next to it:
+
The <b>Printer Server</b> feature provides the possibility to configure access to a printer that is connected to the USB port of the device. After the printer is connected to the device's USB port and configured, it can be utilized by users in the local network (LAN, WiFi) or remotely.
 +
 
 +
The 'Add' button lets you add and manage additional printers. To configure a printer instance, click the Edit button located next to it:
  
−
[[File:Networking_rutx_manual_printer_server_printer_server_v1.png| border | class=tlt-border]]
+
[[File:Networking_rutos_manual_usb_tools_printer_server_printer_server.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 25: Line 92:
 
     <tr>
 
     <tr>
 
       <td>Enable</td>
 
       <td>Enable</td>
−
       <td>off | on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
−
       <td>Turns printer support on or off.</td>
+
       <td>Turns USB printer support on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
       <td>Device</td>
 
       <td>Device</td>
−
       <td>file path; default: <b>/dev/usb/lp0</b></td>
+
       <td>filepath; default: <b>/dev/usb/lp0</b></td>
 
       <td>Printer's device file.</td>
 
       <td>Printer's device file.</td>
 
     </tr>
 
     </tr>
Line 40: Line 107:
 
     <tr>
 
     <tr>
 
     <td>Bidirectional mode</td>
 
     <td>Bidirectional mode</td>
−
         <td>off | on; default: <b>on</b></td>
+
         <td>off {{!}} on; default: <b>on</b></td>
 
         <td>Turns bidirectional mode on or off.</td>
 
         <td>Turns bidirectional mode on or off.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
 +
{{#ifeq:{{{series}}}|RUTM||For step-by-step instructions on how to use a printer with {{{name}}}, <b>[[How to set up a USB printer (Windows, {{{name}}})|click here]].</b>|}}
 +
}}
  
−
===PC and printer setup===
+
{{#ifeq:{{{shares}}}|0||
−
----
+
==Network Shares==
−
For step-by-step instructions on how to set up a printer for use with the {{{name}}} device, <b>[[How to set up a USB printer (Windows, {{{name}}})|click here]]</b>
 
  
−
==USB to Serial==
+
The <b>Network Shares</b> section is used to manage Network-attached storage (NAS) such as USB drives and hard drives. The {{{name}}} device supports the following file system architectures:
  
−
The device's USB connector can also be used as a <b>serial port</b>.  
+
<ul>
 +
    <li>FAT</li>
 +
    <li>FAT32</li>
 +
    <li>exFAT</li>
 +
    <li>NTFS</li>
 +
    <li>ext2</li>
 +
    <li>ext3</li>
 +
    <li>ext4</li>
 +
</ul>
 +
{{#switch:{{{series}}}
 +
|#default=|RUTX|RUTM|RUTC=
 +
<u><b>Note:</b> Network Shares is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>}}
 +
===General Settings===
 +
----
 +
The <b>General</b> section is used to set up <b>Samba</b> - a software solution for using the Server Message Block (SMB) networking protocol, which provides shared file access between nodes on a computer network. Refer to the figures and table below for more information about Samba configuration.  
  
−
[[File:Networking_rutos_manual_usb_tools_usb_to_serial_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_usb_tools_network_shares_general_samba_general_settings_v2.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
 
     <tr>
 
     <tr>
 
         <th>Field</th>
 
         <th>Field</th>
−
      <th>Value</th>
+
        <th>Value</th>
−
      <th>Description</th>
+
        <th>Description</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
      <td>Enabled</td>
+
        <td>Enable</td>
−
      <td>off | on; default: <b>off</b></td>
+
        <td>off {{!}} on; default: <b>off</b></td>
−
      <td>Enables the RS232 service</td>
+
        <td>Turns Samba on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>Baud rate</td>
+
        <td>Hostname</td>
−
         <td>300 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200; default: <b>115200</b></td>
+
         <td>string; default: <b>Router_share</b></td>
−
         <td>Data rate for serial data transmission (in bits per second)</td>
+
         <td>Name of the Samba server.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>Data bits</td>
+
        <td>Description</td>
−
         <td>5 | 6 | 7 | 8; default: <b>8</b></td>
+
         <td>string; default: <b>Router share</b></td>
−
         <td>Number of data bits for each character</td>
+
         <td>Short description about the Same server.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>Parity</td>
+
        <td>Workgroup</td>
−
         <td>None | Odd | Even; default: <b>None</b></td>
+
         <td>string; default: <b>WORKGROUP</b></td>
−
         <td>In serial transmission, parity is a method of detecting errors. An extra data bit is sent with each data character, arranged so that the number of 1 bits in each character, including the parity bit, is always odd or always even. If a byte is received with the wrong number of 1s, then it must have been corrupted. However, an even number of errors can pass the parity check.
+
         <td>Name of the server's workgroup.</td>
−
            <ul>
 
−
              <li><b>None</b> (<b>N</b>) - no parity method is used</li>
 
−
              <li><b>Odd</b> (<b>O</b>) - the parity bit is set so that the number of "logical ones (1s)" has to be odd</li>
 
−
              <li><b>Even</b> (<b>E</b>) - the parity bit is set so that the number of "logical ones (1s)" has to be even</li>
 
−
            </ul>
 
−
        </td>
 
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
      <td>Stop bits</td>
+
        <td>Share home-directories</td>
−
      <td>1 | 2; default: <b>1</b></td>
+
        <td>off {{!}} on; default: <b>on</b></td>
−
      <td>Stop bits sent at the end of every character allow the receiving signal hardware to detect the end of a character and to resynchronise with the character stream. Electronic devices usually use one stop bit. Two stop bits are required if slow electromechanical devices are used</td>
+
        <td>Allows system users to reach their home directories via network shares.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>Flow control</td>
+
        <td>Interfaces</td>
−
         <td>None | RTS/CTS | Xon/Xoff; default: <b>None</b></td>
+
         <td>lan; default: <b>none</b></td>
−
         <td>In many circumstances a transmitter might be able to send data faster than the receiver is able to process it. To cope with this, serial lines often incorporate a "handshaking" method, usually distinguished between hardware and software handshaking.
+
         <td>Bind samba server to specified interfaces </td>
−
            <ul>
 
−
                <li><b>RTS/CTS</b> - hardware handshaking. RTS and CTS are turned OFF and ON from alternate ends to control data flow, for instance when a buffer is almost full</li>
 
−
                <li><b>Xon/Xoff</b> - software handshaking. The Xon and Xoff characters are sent by the receiver to the sender to control when the sender will send data, i.e., these characters go in the opposite direction to the data being sent. The circuit starts in the "sending allowed" state. When the receiver's buffers approach capacity, the receiver sends the Xoff character to tell the sender to stop sending data. Later, after the receiver has emptied its buffers, it sends an Xon character to tell the sender to resume transmission
 
−
            </ul>
 
−
        </td>
 
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>Serial type</td>
+
        <td>Insert custom configuration to config</td>
−
         <td>[[#Console|Console]] | [[#Over IP|Over IP]] | [[#Modbus gateway|Modbus gateway]] | [[#NTRIP client|NTRIP client]]; default: <b>Console</b></td>
+
         <td>string; default: <b>none</b></td>
−
         <td>Specifies the serial connection type.<br><b>Look to the sections below for information on different USB to Serial type options.</b></td>
+
         <td>Insert custom line to configuration file.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
  
−
===Console===
+
===Shared Directories===
 
----
 
----
−
<b>Console</b> requires no further configuration than the settings above and is used as a direct-access method to the device's shell interface. For this purpose you may use such applications as PuTTY on Windows and microcom, minicom, picocom or similar applications on Linux.
+
The <b>Shared Directories</b> section is used to configure access to the device's files and directories, including USB storage drives. The list of Shared Directories is empty by default; click the 'Add' button in order to create a new configuration:
  
−
[[File:Networking_rutos_manual_usb_tools_usb_to_serial_console_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_usb_tools_network_shares_general_shared_directories_add_button_v2.png|border|class=tlt-border]]
  
−
===Over IP===
+
The newly added Shared Directory configuration should look similar to this:
−
----
 
−
The <b>Over IP</b> serial type is used to manage serial connections over a TCP/IP network.
 
  
−
[[File:Networking_rutos_manual_usb_tools_usb_to_serial_over_ip_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_usb_tools_network_shares_general_shared_directories_v2.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
 
     <tr>
 
     <tr>
 
         <th>Field</th>
 
         <th>Field</th>
−
      <th>Value</th>
+
        <th>Value</th>
−
      <th>Description</th>
+
        <th>Description</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
      <td>Protocol</td>
+
        <td>Name</td>
−
      <td>TCP | UDP; default: <b>TCP</b></td>
+
        <td>string; default: <b>none</b></td>
−
      <td>Protocol used in the communication process.</td>
+
        <td>Name of a shared directory.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>Mode</td>
+
        <td>Path</td>
−
         <td><span style="color: red;">Server</span> | <span style="color: purple;">Client</span> | Bidirect; default: <b>Server</b></td>
+
         <td>filepath; default: <b>No mount point</b></td>
−
         <td>Device's role in the connection:
+
         <td>Path to a shared directory. To share an entire drive, choose an automatically generated path from this drop-down box (for example, /mnt/sda1). To share a specific directory on the drive, specify the full path to that directory (for example, /mnt/sda1/shared/video).</td>
−
            <ul>
 
−
                <li><b>Server</b> - the device waits for incoming connections.</li>
 
−
                <li><b>Client</b> - the device initiates the connection.</li>
 
−
                <li><b>Bidirect</b> - acts as client by default but waits for incoming connections at the same time.</li>
 
−
            </ul>
 
−
        </td>
 
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>No leading zeros</td>
+
        <td>Allowed users</td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>samba user(s); default: <b>none</b></td>
−
         <td>When checked, indicates that the first hex zeros should be skipped.</td>
+
         <td>Samba user(s) that are permitted to access a Shared Directory. Users can be created from the Users menu tab.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td><span style="color: red;">Server settings</span>: Port</td>
+
        <td>Read-only</td>
−
         <td>integer [0..65535]; default: <b>none</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
−
         <td>Internal port number used to listen for incoming connections.</td>
+
         <td>Makes a Shared Directory read-only, which means the directory can only be accessed to view and read files (not write).</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td><span style="color: red;">Server settings</span>: Timeout (s)</td>
+
        <td>Browseable</td>
−
         <td>integer; default: <b>none</b></td>
+
         <td>off {{!}} on; default: <b>on</b></td>
−
         <td>Specifies an inactivity time limit (in second) after which an inactive clients is disconnected.</td>
+
         <td>Makes a Shared Directory browsable; i.e., visible in shared directory network discovery.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
      <td><span style="color: purple;">Client settings</span>: Server Address</td>
+
        <td>Allow guests</td>
−
      <td>ip | host; default: <b>none</b></td>
+
        <td>off {{!}} on; default: <b>off</b></td>
−
      <td>IP address or hostname of the server that the client will connect to.</td>
+
        <td>Turns guest access on or off. Guest access allows anonymous connections to a Shared Directory.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td><span style="color: red;">Client settings</span>: Port</td>
+
         <td>Actions</td>
−
         <td>integer [0..65535]; default: <b>none</b></td>
+
         <td>Delete; default: <b>Delete</b></td>
−
         <td>Server's listening port number.</td>
+
         <td>Deletes a Shared Directory configuration.</td>
−
    </tr>
 
−
    <tr>
 
−
    <td><span style="color: red;">Client settings</span>: Reconnect interval (s)</td>
 
−
        <td>integer; default: <b>none</b></td>
 
−
         <td>Time period (in seconds) between reconnection attempts in case a connection fails.</td>
 
−
    </tr>
 
−
    <tr>
 
−
    <td>Open port automatically</td>
 
−
        <td>off | on; default: <b>on</b></td>
 
−
        <td>Automatically adds a traffic rule in the firewall configuration to open the required port for NTRIP communication.</td>
 
−
    </tr>
 
−
    <tr>
 
−
    <td>Echo</td>
 
−
        <td>off | on; default: <b>off</b></td>
 
−
        <td>Turn USB to serial echo on or off.</td>
 
 
     </tr>
 
     </tr>
 
</table>
 
</table>
  
 +
To connect to the router's SAMBA server from Windows, specify the address in this format:
 +
 +
\\smb_server_address\share_name
 +
 +
Replace <i>smb_server_address</i> with the IP address of this device or SAMBA share hostname; replace <i>share_name</i> with the name of the "share" (as specified in the 'Name' field). For example:
 +
 +
<i>
 +
\\192.168.1.1\my_share
 +
\\Router_share\johns_files
 +
</i>
  
−
===Modbus gateway===
+
===Users===
 
----
 
----
−
The <b>Modbus gateway</b> serial type allows redirecting TCP data coming to a specified port to RTU specified by the Slave ID. The Slave ID can be specified by the user or be obtained directly from the Modbus header.
+
The <b>Users</b> section is used to create Samba users that can be granted access to Shared Directories. To add a new user, enter a custom username, password and click the 'Add' button.
 +
 
 +
[[File:Networking_rutos_manual_usb_tools_network_shares_users_add_button_v2.png|border|class=tlt-border]]
 +
 
 +
The newly added User should appear in the Users list. To change the password of a Samba User, click the 'Edit' button located next to it:
 +
 
 +
[[File:Networking_rutos_manual_usb_tools_network_shares_users_edit_button_v2.png|border|class=tlt-border]]
 +
 
 +
This will redirect you to the Settings page for that User which should look similar to this:
 +
 
 +
[[File:Networking_rutos_manual_usb_tools_network_shares_users_user_settings_v2.png|border|class=tlt-border]]
 +
}}
 +
 
 +
==DLNA==
 +
 
 +
The <b>Digital Living Network Alliance (DLNA)</b> standard provides the possibility to stream media files from local storage to DLNA-capable devices such as computers, Smart TVs, tablets, etc.
 +
 
 +
This page is used to configure the DLNA service on the device. When the DLNA service is enabled, the device listens for incoming connections on the specified network interface and port number. Clients connecting to that port number on that interface will be granted access to the media files residing in the specified directories.
 +
 
 +
DLNA devices use Universal Plug and Play (UPnP) to discover and communicate with each other on a network. To access the DLNA server hosted on this device you will need a DLNA-capable application. If you're using your phone or other mobile device, simply search for DLNA in the device's application store. On Linux and Windows computers you can use applications capable of playing network media streams (such as VLC). Smart TVs and similar devices may have DLNA support built-in by default.
 +
 
 +
File format types supported by the DLNA service on this device:
 +
 
 +
<ul>
 +
    <li>Audio - WMA, WAV, MP3, FLAC</li>
 +
    <li>Image - JPEG</li>
 +
    <li>Video - WMV, MTS, MP4, MKV, MOV</li>
 +
</ul>
 +
<u><b>Note:</b> DLNA is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
  
−
[[File:Networking_rutos_manual_usb_tools_usb_to_serial_modbus_gateway_v1.png|border|class=tlt-border]]
+
===General Settings===
 +
----
 +
[[File:Networking_rutos_manual_dlna_general_settings_v2.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 199: Line 287:
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>Listening IP</td>
+
       <td>Enable</td>
−
       <td>ip; default: <b>0.0.0.0</b></td>
+
       <td>off | on; default: <b>off</b></td>
−
       <td>IP address to listen for incoming connections.</td>
+
       <td>Turns the DLNA service on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
       <td>Port</td>
 
       <td>Port</td>
−
       <td>integer [0..65535]; default: <b>none</b></td>
+
       <td>integer [0..65535]; default: <b>8200</b></td>
−
       <td>Port number to listen for incoming connections.</td>
+
       <td>DLNA service listening port.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>Slave ID configuration type</td>
+
      <td>Friendly name</td>
−
        <td><span style="color: red;">User defined</span> | <span style="color: purple;">Obtained from TCP</span>;<br>default: <b><span style="color: red;">User defined</span></b></td>
+
      <td>string; default: <b>Teltonika DLNA Server</b></td>
−
        <td>Specifies whether slave IDs are user defined or automatically obtained from TCP.</td>
+
      <td>The name of this server as it will be displayed to clients.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td><span style="color: red;">Slave ID</span> | <span style="color: purple;">Permitted slave IDs</span></td>
+
      <td>Root container</td>
−
        <td><span style="color: red;">integer </span> | <span style="color: purple;">range of integers</span>;<br>default: <b><span style="color: red;">1</span> or <span style="color: purple;">1-247</span></b></td>
+
      <td>Standard container | Browse directory | Music | Video | Pictures; default: <b>Standard container</b></td>
−
        <td>Specifies the slave ID of range of permitted slave IDs. The way this field is named and its function depends on the value of the ''Slave ID configuration'' field. <br> A range of IDs can be specified by placing a hyphen (<i>-</i>) between two integer numbers. For example, if you permit slave IDs in the range of 10 to 20, you would specify it as: <i>10-20</i><br>You can also specify multiple values that are not connected in a range using commas (<i>,</i>). For example, to specify 6, 50 and 100 as permitted slave IDs, you would have to use: <i>6,50,100</i></td>
+
      <td>Specifies which type of files will be made available in DLNA file sharing.
 +
            <ul>
 +
                <li><b>Standard container</b> - allows browsing the shared media directory but also organizes files by type (music, video, pictures).</li>
 +
                <li><b>Browse directory</b> - allows browsing the shared media directory .</li>
 +
                <li><b>Music, Video, Pictures</b> - only shares the files of the specified type.</li>
 +
            </ul>
 +
        </td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>Open port automatically</td>
+
      <td>Media directories</td>
−
        <td>off | on; default: <b>on</b></td>
+
      <td>filepath(s); default: <b>/mnt</b></td>
−
        <td>Automatically adds a traffic rule in the firewall configuration to open the required port for NTRIP communication.</td>
+
      <td>A list of directories that will be scanned by the DLNA service and made available to clients. You can also specify what types of files should be displayed from the directy. Use 'A' for audio, 'V' for video, 'P' for images followed by a comma and the path to the directory. For example:
 +
            <ul>
 +
                <li><i>A,/mnt</i> - share only audio files from the <i>/mnt/sda1</i> directory.</li>
 +
                <li><i>V,/mnt</i> - share only video files from the <i>/mnt/sda1</i> directory.</li>
 +
                <li><i>P,/mnt</i> - share only image files from the <i>/mnt/sda1</i> directory.</li>
 +
            </ul>Click the plus symbol to add more directories.
 +
        </td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>Echo</td>
+
      <td>Album art names</td>
−
        <td>off | on; default: <b>off</b></td>
+
      <td>filename(s); default: <b>Album.jpg</b></td>
−
        <td>Turn USB to serial echo on or off.</td>
+
      <td>Name of the file(s) to check when searching for album art images. Click the plus symbol to specify more file names.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
  
−
===NTRIP client===
+
===Advanced Settings===
 
----
 
----
−
<b>Networked Transport of RTCM via Internet Protocol (NTRIP)</b> is a protocol for streaming differential GPS (DGPS) data over the Internet in accordance with specification published by RTCM.
+
[[File:Networking_rutos_manual_dlna_advanced_settings_v2.png|border|class=tlt-border]]
−
 
 
−
[[File:Networking_rutos_manual_usb_tools_usb_to_serial_ntrip_client_v1.png|border|class=tlt-border]]
 
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 243: Line 341:
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>IP address</td>
+
       <td>Interfaces</td>
−
       <td>ip; default: <b>0.0.0.0</b></td>
+
       <td>network interface; default: <b>br-lan</b></td>
−
       <td>IP address of an NTRIP server.</td>
+
       <td>Network interface(s) on which this DLNA server will be hosted.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>Port</td>
+
       <td>Enable notify</td>
−
       <td>integer [0..65535]; default: <b>none</b></td>
+
       <td>off | on; default: <b>on</b></td>
−
       <td>TCP/UDP port used for NTRIP communication.</td>
+
       <td>Turns inotify on or off. Inotify is a Linux kernel subsystem that notices changes to the filesystem and reports on these changes to applications, in this case, the DLNA service.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>Mount point</td>
+
      <td>Enable TIVO</td>
−
        <td>file path | string; default: <b>none</b></td>
+
      <td>off | on; default: <b>off</b></td>
−
        <td>NTRIP mount point.</td>
+
      <td>Turn support for streaming .jpg and .mp3 files to a TiVo supporting HMO on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>Data format</td>
+
       <td>Strict to DLNA standard</td>
−
        <td>NTRIP V2.0 TCP/IP | NTRIP V2.0 RSTP/RTP | NTRIP V1.0 | Automatic detection | NTRIP V2.0 UDP; default: <b>NTRIP V1.0</b></td>
+
       <td>off | on; default: <b>off</b></td>
−
        <td>Version of NTRIP protocol.</td>
+
      <td>Set this to strictly adhere to DLNA standards. Turning this on will allow server-side downscaling of very large JPEG images, which may hurt JPEG serving performance on (at least) Sony DLNA products.</td>
−
    </tr>
 
−
    <tr>
 
−
       <td>Username</td>
 
−
      <td>string; default: <b>none</b></td>
 
−
      <td>User name for authentication to NTRIP server.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Password</td>
 
−
       <td>string; default: <b>none</b></td>
 
−
      <td>Password for authentication to NTRIP server.</td>
 
−
    </tr>
 
−
    <tr>
 
−
    <td>Default NMEA string</td>
 
−
        <td>string; default: <b>none</b></td>
 
−
        <td>Optional NMEA string that will be used as the default value when initiating the connection to the NTRIP server (this value is only sent to the server if there is no NMEA from router's GPS device).</td>
 
−
    </tr>
 
−
    <tr>
 
−
    <td>Use device GPS</td>
 
−
        <td>off | on; default: <b>off</b></td>
 
−
        <td>Allows to obtain default NMEA string from the router's GPS device. Only works if GPS service is enabled and location fix is obtained at the time of NTRIP service start.</td>
 
−
    </tr>
 
−
    <tr>
 
−
    <td>Open port automatically</td>
 
−
        <td>off | on; default: <b>on</b></td>
 
−
        <td>Automatically adds a traffic rule in the firewall configuration to open the required port for NTRIP communication.</td>
 
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td>Echo</td>
+
      <td>Notify interval</td>
−
        <td>off | on; default: <b>off</b></td>
+
      <td>integer; default: <b>900</b></td>
−
        <td>Turn USB to serial echo on or off.</td>
+
      <td>Notify interval in seconds.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
  
 
[[Category:{{{name}}} Services section]]
 
[[Category:{{{name}}} Services section]]

Latest revision as of 10:40, 4 October 2024

The information in this page is updated in accordance with firmware version .

Summary

The USB Tools page is used to manage services related to the device's USB connector.

This chapter of the user manual provides an overview of the USB Tools page in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

General

The General section is used to manage global USB settings. It consists of two subsections:

USB Mount Settings

The USB Mount Settings section is used to set the transfer type (synchronous or asynchronous) for the USB device.

Networking rutos manual usb tools general usb mount settings.png

Synchronous ensures that all changes to the according filesystem are immediately flushed to disk. Enabling this will drastically lower the life expectancy of your USB device.

Mounted File Systems

The Mounted File Systems list displays USB mass storage devices (MSD) currently attached to this device.

Networking rutos manual usb tools general mounted file systems v3.png

Field Value Description
Device filepath; default: /dev/sd* The filesystem of the attached USB MSD.
Mount Point filepath; default: /mnt/sd* The root directory of the mounted filesystem.
Available string; default: none Displays available storage information for a mounted USB MSD.
Used string; default: none Displays used storage information for a mounted USB MSD.
In Use string; default: none Indicates whether a USB MSD is currently in use by some device service or not.

The Format button can be used to format the attached device, and the Unmount button next to each entry in the list is used to unmount an attached USB device. Please make sure to unmount a USB device before physically detaching it from the {{{name}}}.

The Refresh is used to refresh the information in the Mounted File Systems list. If you attach a new USB device and cannot see it in the list, try clicking the 'Refresh' button.

Note: Usb with NTFS partition is supported in read-only mode.

Printer Server

The Printer Server feature provides the possibility to configure access to a printer that is connected to the USB port of the device. After the printer is connected to the device's USB port and configured, it can be utilized by users in the local network (LAN, WiFi) or remotely.

The 'Add' button lets you add and manage additional printers. To configure a printer instance, click the Edit button located next to it:

Networking rutos manual usb tools printer server printer server.png

Field Value Description
Enable off | on; default: off Turns USB printer support on or off.
Device filepath; default: /dev/usb/lp0 Printer's device file.
Port integer [9100..9109]; default: 9100 Printer's TCP port.
Bidirectional mode off | on; default: on Turns bidirectional mode on or off.

For step-by-step instructions on how to use a printer with {{{name}}}, [[How to set up a USB printer (Windows, {{{name}}})|click here]].

Network Shares

The Network Shares section is used to manage Network-attached storage (NAS) such as USB drives and hard drives. The {{{name}}} device supports the following file system architectures:

  • FAT
  • FAT32
  • exFAT
  • NTFS
  • ext2
  • ext3
  • ext4

General Settings

The General section is used to set up Samba - a software solution for using the Server Message Block (SMB) networking protocol, which provides shared file access between nodes on a computer network. Refer to the figures and table below for more information about Samba configuration.

Networking rutos manual usb tools network shares general samba general settings v2.png

Field Value Description
Enable off | on; default: off Turns Samba on or off.
Hostname string; default: Router_share Name of the Samba server.
Description string; default: Router share Short description about the Same server.
Workgroup string; default: WORKGROUP Name of the server's workgroup.
Share home-directories off | on; default: on Allows system users to reach their home directories via network shares.
Interfaces lan; default: none Bind samba server to specified interfaces
Insert custom configuration to config string; default: none Insert custom line to configuration file.

Shared Directories

The Shared Directories section is used to configure access to the device's files and directories, including USB storage drives. The list of Shared Directories is empty by default; click the 'Add' button in order to create a new configuration:

Networking rutos manual usb tools network shares general shared directories add button v2.png

The newly added Shared Directory configuration should look similar to this:

Networking rutos manual usb tools network shares general shared directories v2.png

Field Value Description
Name string; default: none Name of a shared directory.
Path filepath; default: No mount point Path to a shared directory. To share an entire drive, choose an automatically generated path from this drop-down box (for example, /mnt/sda1). To share a specific directory on the drive, specify the full path to that directory (for example, /mnt/sda1/shared/video).
Allowed users samba user(s); default: none Samba user(s) that are permitted to access a Shared Directory. Users can be created from the Users menu tab.
Read-only off | on; default: off Makes a Shared Directory read-only, which means the directory can only be accessed to view and read files (not write).
Browseable off | on; default: on Makes a Shared Directory browsable; i.e., visible in shared directory network discovery.
Allow guests off | on; default: off Turns guest access on or off. Guest access allows anonymous connections to a Shared Directory.
Actions Delete; default: Delete Deletes a Shared Directory configuration.

To connect to the router's SAMBA server from Windows, specify the address in this format: 

\\smb_server_address\share_name

Replace smb_server_address with the IP address of this device or SAMBA share hostname; replace share_name with the name of the "share" (as specified in the 'Name' field). For example: 

\\192.168.1.1\my_share
\\Router_share\johns_files

Users

The Users section is used to create Samba users that can be granted access to Shared Directories. To add a new user, enter a custom username, password and click the 'Add' button.

Networking rutos manual usb tools network shares users add button v2.png

The newly added User should appear in the Users list. To change the password of a Samba User, click the 'Edit' button located next to it:

Networking rutos manual usb tools network shares users edit button v2.png

This will redirect you to the Settings page for that User which should look similar to this:

Networking rutos manual usb tools network shares users user settings v2.png

DLNA

The Digital Living Network Alliance (DLNA) standard provides the possibility to stream media files from local storage to DLNA-capable devices such as computers, Smart TVs, tablets, etc.

This page is used to configure the DLNA service on the device. When the DLNA service is enabled, the device listens for incoming connections on the specified network interface and port number. Clients connecting to that port number on that interface will be granted access to the media files residing in the specified directories.

DLNA devices use Universal Plug and Play (UPnP) to discover and communicate with each other on a network. To access the DLNA server hosted on this device you will need a DLNA-capable application. If you're using your phone or other mobile device, simply search for DLNA in the device's application store. On Linux and Windows computers you can use applications capable of playing network media streams (such as VLC). Smart TVs and similar devices may have DLNA support built-in by default.

File format types supported by the DLNA service on this device:

  • Audio - WMA, WAV, MP3, FLAC
  • Image - JPEG
  • Video - WMV, MTS, MP4, MKV, MOV

Note: DLNA is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

General Settings

Networking rutos manual dlna general settings v2.png

Field Value Description
Enable off | on; default: off Turns the DLNA service on or off.
Port integer [0..65535]; default: 8200 DLNA service listening port.
Friendly name string; default: Teltonika DLNA Server The name of this server as it will be displayed to clients.
Root container Standard container | Browse directory | Music | Video | Pictures; default: Standard container Specifies which type of files will be made available in DLNA file sharing.
  • Standard container - allows browsing the shared media directory but also organizes files by type (music, video, pictures).
  • Browse directory - allows browsing the shared media directory .
  • Music, Video, Pictures - only shares the files of the specified type.
Media directories filepath(s); default: /mnt A list of directories that will be scanned by the DLNA service and made available to clients. You can also specify what types of files should be displayed from the directy. Use 'A' for audio, 'V' for video, 'P' for images followed by a comma and the path to the directory. For example:
  • A,/mnt - share only audio files from the /mnt/sda1 directory.
  • V,/mnt - share only video files from the /mnt/sda1 directory.
  • P,/mnt - share only image files from the /mnt/sda1 directory.
Click the plus symbol to add more directories.
Album art names filename(s); default: Album.jpg Name of the file(s) to check when searching for album art images. Click the plus symbol to specify more file names.

Advanced Settings

Networking rutos manual dlna advanced settings v2.png

Field Value Description
Interfaces network interface; default: br-lan Network interface(s) on which this DLNA server will be hosted.
Enable notify off | on; default: on Turns inotify on or off. Inotify is a Linux kernel subsystem that notices changes to the filesystem and reports on these changes to applications, in this case, the DLNA service.
Enable TIVO off | on; default: off Turn support for streaming .jpg and .mp3 files to a TiVo supporting HMO on or off.
Strict to DLNA standard off | on; default: off Set this to strictly adhere to DLNA standards. Turning this on will allow server-side downscaling of very large JPEG images, which may hurt JPEG serving performance on (at least) Sony DLNA products.
Notify interval integer; default: 900 Notify interval in seconds.

[[Category:{{{name}}} Services section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_usb_tools&oldid=133641"