Template:Networking rutos manual dnp3: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
(8 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Template: Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| name  = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
  | series = {{{series}}}
  | series = {{{series}}}
  | name  = {{{name}}}
  | name  = {{{name}}}
Line 12: Line 14:
This manual page provides an overview of the DNP3 functionality in {{{name}}} devices.
This manual page provides an overview of the DNP3 functionality in {{{name}}} devices.


<b>Note:</b> DNP3 is additional software that can be installed from the <b>Services → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
<b>Note:</b> DNP3 is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>


==DNP3 Parameters==
==DNP3 Parameters==
Line 62: Line 64:
|TRB142=
|TRB142=
|TRB145=
|TRB145=
|
|#default=
     <tr>
     <tr>
         <td>LAN MAC Address</td>
         <td>LAN MAC Address</td>
Line 317: Line 319:
         <td>Octet String</td>
         <td>Octet String</td>
     </tr>
     </tr>
}}
}}{{#switch:{{{name}}}|RUT200|RUT241|RUT260|RUT901|RUT951|RUTM50|RUTX08|RUTX09|RUTX10|RUTX11|RUTX12|RUTX14|RUTX50|RUTXR1=
    <tr>
        <td>IO din1, is high?</td>
        <td>72</td>
        <td>Binary</td>RUT
    </tr>}}{{#switch:{{{name}}}|RUT906|RUT956=
    <tr>
        <td>IO din2, is high?</td>
        <td>73</td>
        <td>Binary</td>
    </tr>}}{{#switch:{{{name}}}|RUT200|RUT241|RUT260|RUT901|RUT951|RUTM50|RUTX08|RUTX09|RUTX10|RUTX11|RUTX12|RUTX14|RUTX50|RUTXR1=
    <tr>
        <td>IO dout1, is high?</td>
        <td>74</td>
        <td>Binary</td>
    </tr>}}{{#switch:{{{name}}}|RUT906|RUT956=
    <tr>
        <td>IO dout2, is high?</td>
        <td>75</td>
        <td>Binary</td>
    </tr>}}{{#switch:{{{name}}}|RUT300|RUT301|RUT360|RUT361|TRB140|TRB141|TRB142|TRB143|TRB145|TRB245|TRB246|TRB255|TRB256|TRB500=
    <tr>
        <td>IO dio0, is high?</td>
        <td>76</td>
        <td>Binary</td>
    </tr>}}{{#switch:{{{name}}}|RUT300|RUT301|RUT360|RUT361|TRB140|TRB141|TRB142|TRB143|TRB145|TRB245|TRB246|TRB255|TRB256|TRB500=
    <tr>
        <td>IO dio1, is high?</td>
        <td>78</td>
        <td>Binary</td>
    </tr>}}{{#switch:{{{name}}}|TRB245|TRB246|TRB255|TRB256=
    <tr>
        <td>IO dio2, is high?</td>
        <td>80</td>
        <td>Binary</td>
    </tr>}}{{#switch:{{{name}}}|TRB141=
    <tr>
        <td>IO onewire, is high?</td>
        <td>82</td>
        <td>Binary</td>
    </tr>}}{{#switch:{{{name}}}|RUT906|RUT956|TRB141=
    <tr>
        <td>IO iio, is high?</td>
        <td>83</td>
        <td>Binary</td>
    </tr>}}{{#switch:{{{name}}}|TRB141=
    <tr>
        <td>IO dwi0, is high?</td>
        <td>84</td>
        <td>Binary</td>
    </tr>}}{{#switch:{{{name}}}|TRB141=
    <tr>
        <td>IO dwi1, is high?</td>
        <td>86</td>
        <td>Binary</td>
    </tr>}}{{#switch:{{{name}}}|RUT906|RUT956|TRB141=
    <tr>
        <td>IO relay0, is closed?</td>
        <td>88</td>
        <td>Binary</td>
    </tr>}}{{#switch:{{{name}}}|TRB141=
    <tr>
        <td>IO relay1, is closed?</td>
        <td>89</td>
        <td>Binary</td>
    </tr>}}{{#switch:{{{name}}}|RUT906|RUT956=
    <tr>
        <td>IO acl0, current</td>
        <td>91</td>
        <td>Analog</td>
    </tr>}}{{#switch:{{{name}}}|RUT906|RUT956|TRB245|TRB246|TRB255|TRB256=
    <tr>
        <td>IO adc0</td>
        <td>92</td>
        <td>Analog</td>
    </tr>}}
</table>
</table>


Line 482: Line 559:
     </tr>
     </tr>
</table>
</table>
{{#switch:{{{name}}}
{{#switch:{{{name}}}
|RUTX12=
|RUTX12=
Line 497: Line 573:
A client in DNP3 is a component that communicates (requests data) with a single outstation via a communication channel. By default, the client list is empty. To add a new client, click the 'Add' button.
A client in DNP3 is a component that communicates (requests data) with a single outstation via a communication channel. By default, the client list is empty. To add a new client, click the 'Add' button.


[[File:Networking_rutos_manual_dnp3_tcp_master_add_button_v2.eps|border|class=tlt-border]]
[[File:Networking_rutos_manual_dnp3_tcp_master_add_button_v3.png|border|class=tlt-border]]


After clicking 'Add' you will be redirected to the newly added client's configuration page.
After clicking 'Add' you will be redirected to the newly added client's configuration page.
===Status===
----
This section displays DNP3 Clients status information.
[[File:Networking_rutos_manual_dnp3_tcp_client_status.png|border|class=tlt-border]]


===TCP Client Configuration===
===TCP Client Configuration===
Line 505: Line 587:
The <b>TCP Client Configuration</b> section is used to configure the parameters of a DNP3 Outstation that the Client (this {{{name}}} device) will be querying with requests. The figure below is an example of the TCP Client Configuration and the table below provides information on the fields contained in that section:
The <b>TCP Client Configuration</b> section is used to configure the parameters of a DNP3 Outstation that the Client (this {{{name}}} device) will be querying with requests. The figure below is an example of the TCP Client Configuration and the table below provides information on the fields contained in that section:


[[File:Networking_rutos_manual_dnp3_tcp_client_tcp_client_configuration.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_dnp3_tcp_client_tcp_client_configuration_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 515: Line 597:
     <tr>
     <tr>
         <td>Enable</td>
         <td>Enable</td>
         <td>off | on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Turns communication with the outstation device on or off.</td>
         <td>Turns communication with the outstation device on or off.</td>
     </tr>
     </tr>
Line 555: Line 637:
     <tr>
     <tr>
         <td>Save to flash</td>
         <td>Save to flash</td>
         <td>off | on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>When enabled, stores request information in device flash.</td>
         <td>When enabled, stores request information in device flash.</td>
     </tr>
     </tr>
Line 566: Line 648:
The Request Configuration list is empty by default. To add a new Request Configuration look to the Add New Instance section. Enter a custom name into the 'New Configuration Name' field and click the 'Add' button:
The Request Configuration list is empty by default. To add a new Request Configuration look to the Add New Instance section. Enter a custom name into the 'New Configuration Name' field and click the 'Add' button:


[[File:Networking_rutos_manual_dnp3_tcp_master_tcp_master_configuration_requests_configuration_add_new_instance_v2.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_dnp3_tcp_master_tcp_master_configuration_requests_configuration_add_new_instance_v3.png|border|class=tlt-border]]


The new Request Configuration should become visible in the list:
The new Request Configuration should become visible in the list:


[[File:Networking_rutos_manual_dnp3_tcp_master_requests_configuration.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_dnp3_tcp_client_requests_configuration_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 595: Line 677:
     <tr>
     <tr>
         <td>Data Type</td>
         <td>Data Type</td>
         <td>Binary | Double Binary | Counter | Frozen Counter | Analog | Octet String | Analog Output Status | Binary Output Status; default: <b>Binary</b></td>
         <td>Binary {{!}} Double Binary {{!}} Counter {{!}} Frozen Counter {{!}} Analog {{!}} Octet String {{!}} Analog Output Status {{!}} Binary Output Status; default: <b>Binary</b></td>
         <td>Data object group of the requested index(-es).</td>
         <td>Data object group of the requested index(-es).</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>off/on slider</td>
         <td>Enabled</td>
         <td>off | on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Turns the request on or off.</td>
         <td>Turns the request on or off.</td>
    </tr>
    <tr>
        <td>Actions</td>
        <td> - interactive button</td>
        <td>Deletes request configuration.</td>
     </tr>
     </tr>
</table>
</table>
Line 618: Line 705:
By default, the list is empty. To add a new client instance, enter the instance name, select serial interface and click the 'Add' button.
By default, the list is empty. To add a new client instance, enter the instance name, select serial interface and click the 'Add' button.


[[File:Networking_rutos_manual_generic_serial_instance_add_button_rs232_{{#ifeq:{{#expr: {{{rs232}}} or {{{usb}}}}} |1|1|0}}v3.eps|border|class=tlt-border]]
[[File:Networking_rutos_manual_generic_serial_instance_add_button_rs232_{{#ifeq:{{#expr: {{{rs232}}} or {{{usb}}}}} |1|1|0}}v3.png|border|class=tlt-border]]


After clicking 'Add' you will be redirected to the newly added client instance configuration page.
After clicking 'Add' you will be redirected to the newly added client instance configuration page.
===Status===
----
This section displays DNP3 Clients status information.
[[File:Networking_rutos_manual_dnp3_serial_client_status.png|border|class=tlt-border]]


===Serial Client Configuration===
===Serial Client Configuration===
Line 626: Line 719:
The <b>Serial Client Configuration</b> section is used to configure the parameters of a DNP3 Outstation that the Client (this {{{name}}} device) will be querying with requests. The figure below is an example of the Serial Client Configuration and the table below provides information on the fields contained in that section:
The <b>Serial Client Configuration</b> section is used to configure the parameters of a DNP3 Outstation that the Client (this {{{name}}} device) will be querying with requests. The figure below is an example of the Serial Client Configuration and the table below provides information on the fields contained in that section:


[[File:Networking_rutos_manual_dnp3_serial_client_configuration_rs232{{#ifeq:{{#expr: {{{rs232}}} or {{{usb}}}}} |1|1|0}}.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_dnp3_serial_client_configuration_rs232_{{#ifeq:{{#expr: {{{rs232}}} or {{{usb}}}}} |1|1|0}}.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 733: Line 826:
The new Request Configuration should become visible in the list:
The new Request Configuration should become visible in the list:


[[File:Networking_rutos_manual_dnp3_tcp_master_requests_configuration.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_dnp3_tcp_master_requests_configuration_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 762: Line 855:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>off/on slider</td>
         <td>Enabled</td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Turns the request on or off.</td>
         <td>Turns the request on or off.</td>
    </tr>
    <tr>
        <td>Actions</td>
        <td> - interactive button</td>
        <td>Deletes request configuration.</td>
     </tr>
     </tr>
</table>
</table>
Line 781: Line 879:
The figure below is an example of the DNP3 Outstation window section and the table below provides information on the fields contained in that window:
The figure below is an example of the DNP3 Outstation window section and the table below provides information on the fields contained in that window:


[[File:Networking_rutos_manual_dnp3_dnp3_outstation.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_dnp3_outstation_status.png|border|class=tlt-border]]
 
[[File:Networking_rutos_manual_dnp3_dnp3_outstation_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 791: Line 891:
     <tr>
     <tr>
       <td>Enable</td>
       <td>Enable</td>
       <td>off | on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns DNP3 Outstation on or off.</td>
       <td>Turns DNP3 Outstation on or off.</td>
     </tr>
     </tr>
Line 806: Line 906:
     <tr>
     <tr>
       <td>Unsolicited enabled</td>
       <td>Unsolicited enabled</td>
         <td>off | on; default: <b>none</b></td>
         <td>off {{!}} on; default: <b>none</b></td>
       <td>Enables the transmission of unsolicited messages.</td>
       <td>Enables the transmission of unsolicited messages.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Protocol</td>
       <td>Protocol</td>
       <td>TCP | <span style="color:red">UDP</span>; default: <b>TCP</b></td>
       <td>TCP {{!}} <span style="color:red">UDP</span>; default: <b>TCP</b></td>
       <td>Protocol used for DNP3 communications.</td>
       <td>Protocol used for DNP3 communications.</td>
     </tr>
     </tr>
Line 831: Line 931:
     <tr>
     <tr>
     <td>Allow Remote Access</td>
     <td>Allow Remote Access</td>
         <td>off | on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Allows remote DNP3 connections by adding an exception to the device's firewall on the port specified in the field above.</td>
         <td>Allows remote DNP3 connections by adding an exception to the device's firewall on the port specified in the field above.</td>
     </tr>
     </tr>
Line 839: Line 939:


An outstation in DNP3 is a component that communicates with a single client via a communication channel. It makes measurements of the physical world and then sends them to a client upon request (solicited) or on its own accord (unsolicited). Occasionally a client requests that it do something by sending it a control. This provides the user with the possibility to get system parameters.  
An outstation in DNP3 is a component that communicates with a single client via a communication channel. It makes measurements of the physical world and then sends them to a client upon request (solicited) or on its own accord (unsolicited). Occasionally a client requests that it do something by sending it a control. This provides the user with the possibility to get system parameters.  
===Status===
----
This section displays DNP3 Clients status information.
[[File:Networking_rutos_manual_dnp3_serial_outstation_status.png|border|class=tlt-border]]


===DNP3 Serial Outstation Configuration===
===DNP3 Serial Outstation Configuration===

Revision as of 11:39, 4 October 2024

The information in this page is updated in accordance with firmware version .

Summary

Distributed Network Protocol 3 (DNP3) is a set of communications protocols used between components in process automation systems. It is primarily used for communications between a client station and Remote Terminal Units (RTUs) or Intelligent Electronic Devices (IEDs).

This manual page provides an overview of the DNP3 functionality in {{{name}}} devices.

Note: DNP3 is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

DNP3 Parameters

DNP3 parameters are held within indexes. The index numbers and corresponding system values are described in the table below:

required value index group type
Uptime 0 Counter
Hostname 3 Octet String
Router Serial Number 5 Octet String
LAN MAC Address 6 Octet String
Router name 7 Octet String


TCP Client

A client in DNP3 is a component that communicates (requests data) with a single outstation via a communication channel. By default, the client list is empty. To add a new client, click the 'Add' button.

After clicking 'Add' you will be redirected to the newly added client's configuration page.

Status

This section displays DNP3 Clients status information.

TCP Client Configuration

The TCP Client Configuration section is used to configure the parameters of a DNP3 Outstation that the Client (this {{{name}}} device) will be querying with requests. The figure below is an example of the TCP Client Configuration and the table below provides information on the fields contained in that section:

Field Value Description
Enable off | on; default: off Turns communication with the outstation device on or off.
Name string; default: none Name of the TCP client, used for easier management purposes.
IP address ip; default: none DNP3 Outstation IP address.
Port integer [0..65535]; default: none DNP3 Outstation Port.
Local Address integer [0..65535]; default: none Clients Link-Layer address.
Remote Address integer [0..65535]; default: none Outstation Link-Layer address.
Period integer [1..60]; default: none Interval at which requests are sent to the outstation device.
Timeout integer [1..60]; default: none Maximum response wait time.
Save to flash off | on; default: off When enabled, stores request information in device flash.

Requests Configuration

A DNP3 request is a way of obtaining data from DNP3 Outstations. The client sends a request to an outstation specifying the function codes to be performed. The outstation then sends the requested data back to the DNP3 client.

The Request Configuration list is empty by default. To add a new Request Configuration look to the Add New Instance section. Enter a custom name into the 'New Configuration Name' field and click the 'Add' button:

The new Request Configuration should become visible in the list:

Field Value Description
Name string; default: Unnamed Name of this Request Configuration. Used for easier management purposes.
Start Index integer [0..65535]; default: none Start index of the data subarray.
End Index integer [0..65535]; default: none End index of the data subarray.
Data Type Binary | Double Binary | Counter | Frozen Counter | Analog | Octet String | Analog Output Status | Binary Output Status; default: Binary Data object group of the requested index(-es).
Enabled off | on; default: off Turns the request on or off.
Actions - interactive button Deletes request configuration.

Request Configuration Testing

This section is used to check whether the configuration works correctly. Simply click the 'Test' button and a response should appear in the box below. The last value represents the configured request data. A successful response to a test may look something like this:


DNP3 Outstation

An outstation in DNP3 is a component that communicates with a single client via a communication channel. It makes measurements of the physical world and then sends them to a client upon request (solicited) or on its own accord (unsolicited). Occasionally a client requests that it do something by sending it a control. This provides the user with the possibility to get system parameters.

The figure below is an example of the DNP3 Outstation window section and the table below provides information on the fields contained in that window:

Field Value Description
Enable off | on; default: off Turns DNP3 Outstation on or off.
Local Address integer [0..65535]; default: none Outstation Link-Layer address.
Remote Address integer [0..65535]; default: none Client Link-Layer address.
Unsolicited enabled off | on; default: none Enables the transmission of unsolicited messages.
Protocol TCP | UDP; default: TCP Protocol used for DNP3 communications.
Port integer [0..65535]; default: none Port used for DNP3 communications.
UDP response address ipv4; default: none UDP response address.
UDP response port integer [0..65535]; default: none UDP response port.
Allow Remote Access off | on; default: off Allows remote DNP3 connections by adding an exception to the device's firewall on the port specified in the field above.


[[Category:{{{name}}} Services section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_dnp3&oldid=133656"